2-wire intercom system read this manual carefully before using the product, and keep safe for future use. Cdv17ds installation manual(en).
Unit mounting the location of outdoor station should keep away from snow,rain,and intensity light. Accessory contents: accessories include a screwdriver t20, one m4x10 screw, two pa4x25 screws,three pa3x25 screws,three pm3x12 screws,and five screw stoppers Φ6x30. Installation steps: installation hei...
Parts and function the door station is an audio door station without camera,which is designed for dt 2-wire system. The front panel is made of zinc alloy for better protection against vandalism & cauterization, and the call button is also made of zinc alloy with blue backlight for auxiliary illumina...
With dbc-4s wiring mode 1 2 3 on 1 2 3 on 1 2 3 on 1 2 3 on 1# camera dip=on,off,off id=00 id=10 id=01 id=11 2# camera 3# camera 4# camera dbc-4s a b c d off on impedance switch bus pl s2+ s1+ s1- bus pl s2+ s1+ s1- bus pl s2+ s1+ s1- bus pl s2+ s1+ s1- 1 2 3 on id=00 code=0, dip-6=off 1 2 3 4 5 6 o...
Multi door station connection multi monitors connection basic in-out wiring mode monitors 1 2 3 on 1 2 3 on 1 2 3 on 1 2 3 on 1# camera dip=on,off,off id=00 id=10 id=01 id=11 2# camera 3# camera 4# camera dbc-4s a b c d off on impedance switch bus pl s2+ s1+ s1- bus pl s2+ s1+ s1- bus pl s2+ s1+ s1-...
Door lock controlled with dry contact eb * lock jumper position in connect one lock 2-3 bus pl s2+ s1+ s1- dip switch setting the dip switch is designed to set the code for door station and monitor, there are two states for each dip switch, please refer to the following sketch map. Door station dip ...
Use the dip switch and prog button to change the unlock setting. 1. Set dip‐1=on, dip‐2=off; 2. Press the prog (fig 1) button and hold for 3 secs (blue led on) to activate the setup option: 1) no relay: press the prog button one more time. 2) nc relay: press the prog button and hold for 3s again. 1....
With dt-cam wiring mode electric lock connection door lock controlled with internal power door lock controlled with dry contact eb * lock jumper position in connect one lock 2-3 bus pl s2+ s1+ s1- dip switch setting bit state description on(1) = off(0) = on on 1 2 3 on 1 2 3 on 1 2 3 on 1 2 3 on id ...
When monitor quantity when monitor quantity >20 bit state user code code=0 code=1 code=2 code=3 code=4 code=6 code=7 code=8 code=9 code=10 code=11 code=12 code=13 code=14 code=15 code=5 bit state user code bit state user code cable requirements the maximum distance of the wiring is limited in the dt...
When monitor quantity when monitor quantity >20 bit state user code code=0 code=1 code=2 code=3 code=4 code=6 code=7 code=8 code=9 code=10 code=11 code=12 code=13 code=14 code=15 code=5 bit state user code bit state user code specification • power supply:dc 24v • power consumption:standby 60ma; work...
Printed 2012. 09 . Right to interpret and copyright of this manual are preserved. The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved. Dt-eng-595a-v1 p120924.
