1. DL manuals
  2. 2N
  3. Intercom System
  4. IP intercom
  5. Configuration Manual

2N IP intercom Configuration Manual

Summary of IP intercom

  • Page 1

    Www.2n.Cz 2n ip intercom configuration manual version: 2.22.

  • Page 2

    The 2n telekomunikace a.S. Is a czech manufacturer and supplier of telecommunications equipment. The product family developed by 2n telekomunikace a.S. Includes gsm gateways, private branch exchanges (pbx), and door and lift communicators. 2n telekomunikace a.S. Has been ranked among the czech top c...

  • Page 3

    The 2n telekomunikace a.S. Is the holder of the iso 9001:2009 certificate. All development, production and distribution processes of the company are managed by this standard and guarantee a high quality, technical level and professional aspect of all our products..

  • Page 4

    2n telekomunikace a.S., www.2n.Cz 4/198 content: 1. Product overview 2. Express wizard for basic settings 3. Model differences and function licensing 3.1 model differences 3.2 function licensing 4. Signalling of operational statuses 5. Intercom configuration 5.1 status 5.2 directory 5.3 hardware 5.4...

  • Page 5

    2n telekomunikace a.S., www.2n.Cz 5/198 1. Product overview the can smartly replace traditional doorbell push-button 2n ip intercoms speakerphone panels and all wiring, bells and home intercom installations in buildings with structured cabling. The intercoms provide more advanced and wider services ...

  • Page 6

    2n telekomunikace a.S., www.2n.Cz 6/198 safety always abide by this information to prevent persons from injury. Warning always abide by this information to prevent damage to the device. Caution important information for system functionality. Tip useful information for quick and efficient functionali...

  • Page 7

    2n telekomunikace a.S., www.2n.Cz 7/198 2. Express wizard for basic settings lan connection setting you have to know the intercom configuration interface address to connect to the lan successfully. Automatic ip address retrieval from the dhcp server is set by default in the . Thus, if connected to a...

  • Page 8

    2n telekomunikace a.S., www.2n.Cz 8/198 remember the new password well or put it down just in case. Because if you forget the password, you will have to reset the intercom to default values (refer to the installation manual of your intercom model) and lose all your current configuration changes. Tip...

  • Page 9

    2n telekomunikace a.S., www.2n.Cz 9/198 firmware update we also recommend you to update your intercom firmware upon the first login to the intercom. Refer to for the latest firmware version. Press the www.2n.Cz update button in the menu to upload firmware. The intercom firmware system maintenance / ...

  • Page 10

    2n telekomunikace a.S., www.2n.Cz 10/198 sip server connection setting set the following parameters in the menu to allow your services phone sip / / intercom make calls and be accessible within your voip infrastructure. Display name – set the name to be displayed as clip on the called party's phone,...

  • Page 11

    2n telekomunikace a.S., www.2n.Cz 11/198 proxy address – set the sip proxy ip address or domain name. Registrar address – set the sip registrar ip address or domain name. The sip proxy and sip registrar addresses are usually identical. Registration enabled – enable intercom registration with the set...

  • Page 12

    2n telekomunikace a.S., www.2n.Cz 12/198 quick dial button settings all the models are equipped with quick dial buttons. If you press a 2n ip intercom quick dial button, a call will be set up to the phone number assigned to the respective users list position. Select position 1, which corresponds to ...

  • Page 13

    2n telekomunikace a.S., www.2n.Cz 13/198 electric lock switching settings an electric lock can be attached to the and controlled by a code from 2n ip intercoms the intercom numeric keypad, or a code from the ip phone keypad during a call. Connect the electric lock as instructed in the installation m...

  • Page 14

    2n telekomunikace a.S., www.2n.Cz 14/198 3. Model differences and function licensing here is what you can find in this section: 3.1 model differences 3.2 function licensing – factory value – licensed function to be purchased additionally – unavailable.

  • Page 15

    2n telekomunikace a.S., www.2n.Cz 15/198 3.1 model differences this manual is valid for all members of the family and so some features 2n ip intercom described herein are only available in selected models or need to be 2n ip intercom activated with a valid licence key. This section provides a short ...

  • Page 16

    2n telekomunikace a.S., www.2n.Cz 16/198 property /model 2n ip intercoms display no optional no optional no.

  • Page 17

    2n telekomunikace a.S., www.2n.Cz 17/198 property/model 2n ip intercoms base verso solo vario force safety uni audio kit video kit basic unit button count 1 or 2 1 1 1, 3 or 6 1, 2 or 4 1 1 or 2 up to 16 external programmable buttons button extenders no up to 145 no up to 48 no numeric keypad no opt...

  • Page 18

    2n telekomunikace a.S., www.2n.Cz 18/198 property/model 2n ip intercoms jpeg http video yes no yes 2n ® support ip eye yes no yes telephone mode no yes no yes no yes.

  • Page 19

    2n telekomunikace a.S., www.2n.Cz 19/198 3.2 function licensing why are some features licensed? Because we did not want every single customer who purchases our intercom, to pay for all the advanced features we offer. We believe that most applications can do with basic level, so the users do not need...

  • Page 20

    2n telekomunikace a.S., www.2n.Cz 20/198 property /licence enhanced audio enhanced video enhanced integration enhanced security nfc g. 729 informacast gold (profi) user sounds • • automatic audio test • • noise detection • • audio/video streaming (rtsp server) • • external ip camera support • • onvi...

  • Page 21

    2n telekomunikace a.S., www.2n.Cz 21/198 property /licence enhanced audio enhanced video enhanced integration enhanced security nfc g. 729 informacast gold (profi) http api (see note below) • • automation functions • • e-mail sending (smtp client) • • automatic update (tftp/http client) • • ftp clie...

  • Page 22

    2n telekomunikace a.S., www.2n.Cz 22/198 property /licence enhanced audio enhanced video enhanced integration enhanced security nfc g. 729 informacast gold (profi) limit unsuccessful access attempts • • nfc support • • g.729 codec • informacast support • what other products follow this licence schem...

  • Page 23

    2n telekomunikace a.S., www.2n.Cz 23/198 note extended switch setting options – quick dial button switch activation, switch time profile. How do i get the licence? Licences are generated by 2n according to the particular serial number. After you decide which licence you want, you need to get the ser...

  • Page 24

    2n telekomunikace a.S., www.2n.Cz 24/198 4. Signalling of operational statuses 2n ip generates sounds to signal switching and changes of operational intercom statuses. Each status change is assigned a different type of tone. See the table below for the list of signals. Note signalling of some of the...

  • Page 25

    2n telekomunikace a.S., www.2n.Cz 25/198 tone meaning profile deactivated this tone signals profile deactivation. This function helps, for example, disable alerting of a user group in an office and routing calls either to a pre- defined phone number (porter's lodge, e.G.) or user mobile phones. Refe...

  • Page 26

    2n telekomunikace a.S., www.2n.Cz 26/198 tone meaning call end signalling 2n ip enables the user to set a call end timeout to avoid call intercom blocking. Press a key on your voip phone to extend the call time during this timeout. Connected voip phone this short tone signals successful connection b...

  • Page 27

    2n telekomunikace a.S., www.2n.Cz 27/198 5. Intercom configuration.

  • Page 28

    2n telekomunikace a.S., www.2n.Cz 28/198 start screen the start screen is an introductory overview screen displayed upon login to the intercom web interface. Use the back arrow in the left-hand upper corner of the following web interface pages to return to this screen anytime. The screen header incl...

  • Page 29

    2n telekomunikace a.S., www.2n.Cz 29/198 configuration menu the configuration includes 5 main menus: , , , 2n ip intercom state directory hardware and including submenus; see below. Services system status device – essentials on the intercom services – information on active services and their states ...

  • Page 30

    2n telekomunikace a.S., www.2n.Cz 30/198 audio test – automatic audio test settings snmp – snmp settings system network – lan connection settings, 802.1x, packet capturing date and time – real time and time zone settings licence – licence settings, trial licence activation certificates – certificate...

  • Page 31

    2n telekomunikace a.S., www.2n.Cz 31/198 5.1 status device services licence access log events the menu provides clear status and other essential information on the status intercom. The menu is divided into five tabs: , and device services, licence, access log . Events – optical and acoustic signalli...

  • Page 32

    2n telekomunikace a.S., www.2n.Cz 32/198 services the tab displays the status of the network interface and selected services. Services.

  • Page 34

    2n telekomunikace a.S., www.2n.Cz 34/198.

  • Page 35

    2n telekomunikace a.S., www.2n.Cz 35/198 access log the tab displays the last 10 records on applied cards. Each record includes access log the card tapping time, card id and type and description details (validity, card owner, etc.). Events the tab displays the last 500 logged events. Every event con...

  • Page 36

    2n telekomunikace a.S., www.2n.Cz 36/198 event description keypressed generated whenever a button is pressed (numeric keypad digits are 0,1,2...,9 and quickdial buttons are %1,%2 ...). Keyreleased generated whenever a button is released (numeric keypad digits are 0,1,2...,9 and quickdial buttons are...

  • Page 37

    2n telekomunikace a.S., www.2n.Cz 37/198 event description cardentered indicates that an rfid card has been tapped. Cardheld indicates that an rfid card has been held for more than 4s. Callstatechanged indicates a call state change (ringing, connected, terminated) including call direction (incoming,...

  • Page 38

    2n telekomunikace a.S., www.2n.Cz 38/198 event description loginblocked event generated after 3 wrong logins to the web interface. Contains information about ip address. Pairingstatechanged change of bluetooth pairing states: inactive, paired, waiting for pairing. Mobkeyentered bluetooth authorisati...

  • Page 39

    2n telekomunikace a.S., www.2n.Cz 39/198 5.2 directory here is what you can find in this subsection: 5.2.1 users 5.2.2 time profiles 5.2.3 holidays.

  • Page 40

    2n telekomunikace a.S., www.2n.Cz 40/198 5.2.1 users the users list is one of the crucial parts of the intercom configuration. It contains user information relevant for such intercom functions as quick dialling, rfid card/code door unlocking, missed call e-mails and so on. The users list contains up...

  • Page 41

    2n telekomunikace a.S., www.2n.Cz 41/198 activated, use the parameter in the menu ( associated switch hardware card reader / , , models) or the parameter in the 2n ip base, vario ® force safety associated switch menu of the card reader module ( model). Hardware modules / 2n ip verso ® use the menu t...

  • Page 42

    2n telekomunikace a.S., www.2n.Cz 42/198 – number to be used for user calling via a numeric keypad. The virtual number number can have 2 to 4 digits. Virtual numbers are not associated with user telephone numbers. They are included in an independent numbering plan allowing you to withhold user telep...

  • Page 43

    2n telekomunikace a.S., www.2n.Cz 43/198 refer to the menu for the users settings. Use the navigation panel directory / users for selecting the user positions easily and arrows for scrolling pages. Or, you can enter the position number and push to move to the position quickly. If you know the user's...

  • Page 44

    2n telekomunikace a.S., www.2n.Cz 44/198 you can assign up to three user phone numbers to each user position. In case the user is inaccessible on one number, the following number will be dialled after a ringing timeout. Enable the to enable dialling multiple parallel call to following number numbers...

  • Page 45

    2n telekomunikace a.S., www.2n.Cz 45/198 ip eye address – set the address of the pc to be sent a special udp message on each active user phone number call. With the aid of this message, the 2n ip eye ® application displays the camera image screen for those users who are not provided with a display-e...

  • Page 46

    2n telekomunikace a.S., www.2n.Cz 46/198 user deputy – select a user to which the user calls will be routed in the event of inaccessibility. Enter user position number or use search button. The deputy setting is applied when the user fails to answer the call to any of its phone numbers within the pr...

  • Page 48

    2n telekomunikace a.S., www.2n.Cz 48/198 2) click the fingerprint reading button in the user section of the web 2n ip intercom interface. 3) click to select a finger for fingerprint loading. Up to two fingerprints may be saved for each user..

  • Page 49

    2n telekomunikace a.S., www.2n.Cz 49/198 4) click scan finger to load a fingerprint. 5) place the selected finger on an external usb reader. This process is repeated three times for greater precision..

  • Page 50

    2n telekomunikace a.S., www.2n.Cz 50/198 ) repeat the process if any inconsistency occurs during fingerprint reading. 6 7) if fingerprint scanning is successful, click done to confirm the settings..

  • Page 51

    2n telekomunikace a.S., www.2n.Cz 51/198 1. Click save and quit to apply the fingerprint settings. 8) you can check the current settings in the user tab. – set a unique mobile device/user identifier. The parameter value is auth id automatically generated for pairing. You can move auth id to another ...

  • Page 52

    2n telekomunikace a.S., www.2n.Cz 52/198 2. 3. 4. 5. 1. 2. 3. A dialogue window with the pin code is displayed. Find the appropriate reader in the application and press start 2n mobile key ® pairing. Enter the code from item 2 into the input field. Pairing is completed. Usb rfid card reader it is po...

  • Page 53

    2n telekomunikace a.S., www.2n.Cz 53/198 3. 4. 5. Tap the card on the card reader. The card id is successfully read. Do not forget to save the configuration..

  • Page 54

    2n telekomunikace a.S., www.2n.Cz 54/198 5.2.2 time profiles such intercom functions as outgoing calls and rfid card/numeric code access, for example, can be time-limited by being assigned a . By assigning a time time profile profile you can: block all calls to a selected user beyond the set time in...

  • Page 55

    2n telekomunikace a.S., www.2n.Cz 55/198 the time profiles are defined not only using the week time sheet but also manually with the aid of special activation/deactivation codes that you can assign to them after arriving in/before leaving your office, for example. Enter the activation/deactivation c...

  • Page 56

    2n telekomunikace a.S., www.2n.Cz 56/198 if a day is marked as holiday (refer to ), the last table row (holiday) directory holidays is applied regardless of the day in a week. Make sure that the real time settings are correct (refer to the date and time subsection) to make this function work properl...

  • Page 57

    2n telekomunikace a.S., www.2n.Cz 57/198 5.2.3 holidays here select the bank holidays (including sundays). You can assign them different time intervals than to working days in their time profiles. You can set holidays for the coming 10 years (click the year number at the top of the screen to select ...

  • Page 58

    2n telekomunikace a.S., www.2n.Cz 58/198 5.3 hardware here is what you can find in this section: 5.3.1 door 5.3.2 switches 5.3.3 audio 5.3.4 camera 5.3.5 keypad 5.3.6 buttons 5.3.7 backlight 5.3.8 display 5.3.9 card reader 5.3.10 digital inputs 5.3.11 extenders.

  • Page 59

    2n telekomunikace a.S., www.2n.Cz 59/198 5.3.1 door list of parameters door assigned switch – select a switch for electromagnetic door lock control. Assigned input – define one (or none) of the logical inputs for open door detection. Unauthorised door open detection – detect if the door is open when...

  • Page 60

    2n telekomunikace a.S., www.2n.Cz 60/198 assigned input – select one (or none) of the logic inputs for the departure button function. The departure button input activation activates the selected switch. The activation time and mode are set by the selected switch parameters. Input mode – set the acti...

  • Page 61

    2n telekomunikace a.S., www.2n.Cz 61/198 door locking – display the active door lock setting: unlocked/locked. Time profile – choose one or more time profiles to be applied. Set the time profiles in directory / time profiles. – set the authentication mode for the time profile in this authentication ...

  • Page 62

    2n telekomunikace a.S., www.2n.Cz 62/198 virtual card to wiegand – select a group of wiegand outputs to which the virtual user card no. Shall be sent after successful authentication. Can be combined with any authentication method, including codes, fingerprints, etc. Silent alarm enabled – a virtual ...

  • Page 63

    2n telekomunikace a.S., www.2n.Cz 63/198 time profile – choose one or more time profiles to be applied. Set the time profiles in directory / time profiles. Authentication mode – set the authentication mode for the time profile in this row including multiple authentication for enhanced security. Sele...

  • Page 64

    2n telekomunikace a.S., www.2n.Cz 64/198 limit failed access attempts – enable the maximum count of unsuccessful authentication attempts. After five unsuccessful attempts (wrong numeric code, invalid card, etc.), the access module will be blocked for 30 seconds even if authentication is valid. Plus ...

  • Page 65

    2n telekomunikace a.S., www.2n.Cz 65/198 5.3.2 switches switches provide a very flexible and efficient control of such intercom peripherals as electric door locks, lighting, additional ringing signalling, and so on. 2n ip intercoms allows you to configure up to 4 (depending on model types) independe...

  • Page 66

    2n telekomunikace a.S., www.2n.Cz 66/198 the switch can work in the monostable or bistable mode. The switch is switched off after a timeout in the monostable mode, and switched on with the first activation and off with the next activation in the bistable mode. The switch signals its state: by a prog...

  • Page 67

    2n telekomunikace a.S., www.2n.Cz 67/198 note switch time profiles are available with the gold or enhanced integration licence only. – assign an electric output to the switch. Choose one of the controlled output available intercom outputs: relay, power output, extender output. If you select , the sw...

  • Page 68

    2n telekomunikace a.S., www.2n.Cz 68/198 the table above includes a list of universal codes that help you activate switches from the phone or intercom keypad. Up to 10 universal codes can be defined for each switch (depending on the particular intercom model). Code – enter a numeric code for the swi...

  • Page 69

    2n telekomunikace a.S., www.2n.Cz 69/198 activation by call – enable switch activation by an incoming or outgoing call, for example. During an outgoing call the switch is activated after sip message 180 ringing is received. The called party confirms ringing by this message. The switch is active duri...

  • Page 70

    2n telekomunikace a.S., www.2n.Cz 70/198 – set switch synchronisation to enable automatic switch synchronise with activation after another switch activation with a predefined delay. Define the delay in the parameter. Synchronisation delay synchronisation delay – set the time interval between synchro...

  • Page 71

    2n telekomunikace a.S., www.2n.Cz 71/198 tip with an external relay, , the following http commands are part no. 9137410e used: to turn on the switch – (e.G.: http://ip_address/state.Xml?Relaystate=1 ) http://192.168.1.10/state.Xml?Relaystate=1 to turn on for pre-defined time (default value is 1.5 s)...

  • Page 72

    2n telekomunikace a.S., www.2n.Cz 72/198 5.3.3 audio all the models are equipped with a speaker or power amplifier output 2n ip intercom to which an external loudspeaker can be connected. Set the phone call and state signalling volume control in this configurat ion section. Set the to master volume ...

  • Page 73

    2n telekomunikace a.S., www.2n.Cz 73/198 model master volume sip speaker horn -20 db .. +20 db list of parameters master volume – set the master volume for the entire system. This setting affects the volume of phone calls and all signalling tones. Adaptive volume – enable the adaptive volume mode in...

  • Page 74

    2n telekomunikace a.S., www.2n.Cz 74/198 ringtone volume – set the incoming call signal loudness. Call-progress tone volume – set the dial, ring and busy tone volume. In case the call-progress tones are automatically generated by the pbx, this setting will not be applied. Key beep volume – set the k...

  • Page 75

    2n telekomunikace a.S., www.2n.Cz 75/198 – set the microphone input gain. Microphone input gain – set the line input gain independently of the microphone gain line input gain value. Tip only at , and 2n sip speaker horn ® 2n ip audio kit ® 2n ip video ® is possible to configure microphone gain. Kit ...

  • Page 76

    2n telekomunikace a.S., www.2n.Cz 76/198 noise level threshold – set the microphone noise level threshold for alarm setting. Set the time interval during which the signal must be above alarm start delay – the threshold to start alarm. – set the time interval during which the signal must be below ala...

  • Page 77

    2n telekomunikace a.S., www.2n.Cz 77/198 5.3.4 camera this menu is only available in the models that are equipped with an 2n ip intercom internal camera or can be connected to an external camera. The camera signal can be streamed directly into the call via a videophone, sent by e-mail, streamed via ...

  • Page 78

    2n telekomunikace a.S., www.2n.Cz 78/198 list of parameters common settings default video source – set the default video signal source. Choose internal camera (or an analogue camera connected to the intercom) or external ip camera. The change of the default video signal source is applied to the rtsp...

  • Page 79

    2n telekomunikace a.S., www.2n.Cz 79/198 internal camera brightness level – set the camera image brightness level. Colour saturation – set the camera image colour saturation. Camera mode – select suitable camera modes according to the current intercom installation conditions (indoor/outdoor use). Ch...

  • Page 80

    2n telekomunikace a.S., www.2n.Cz 80/198 current ir led brightness level – display the current ir led brightness level percentage. The level can automatically be decreased below the set value so that the maximum power consumption cannot be exceeded (typically, when multiple extenders are connected a...

  • Page 81

    2n telekomunikace a.S., www.2n.Cz 81/198 sensitivity threshold– set the lower and upper sensitivity and hysteresis limits for the motion detecting algorithm. – set the rectangular detection area in the image. Detection area – display the activity history (image brightness changes) activity graph inc...

  • Page 82

    2n telekomunikace a.S., www.2n.Cz 82/198 external camera external camera enabled – enable rtsp stream download from the external ip camera. Complete the valid rtsp stream address or the username and password to make the function work properly. Rtsp stream address – enter the ip camera rtsp stream ad...

  • Page 83

    2n telekomunikace a.S., www.2n.Cz 83/198 the camera preview window displays the current image received from an external camera. If the external camera is disconnected or configured incorrectly, the n/a characters are displayed on a blue background. The external ip camera log displays the rtsp commun...

  • Page 84

    2n telekomunikace a.S., www.2n.Cz 84/198 5.3.5 keypad this configuration section helps you set the numeric keypad and quick dial button functions. Allows you to: 2n ip intercoms use the numeric keypad for dialling common phone numbers use the numeric keypad for dialling a user position use the numer...

  • Page 85

    2n telekomunikace a.S., www.2n.Cz 85/198 list of parameters basic settings dial by numeric keypad – enable user calling via the numeric keypad by entering the user position/virtual number and pressing *. Hang up by numeric keypad – enable termination of the active call by the # key (or the key with ...

  • Page 86

    2n telekomunikace a.S., www.2n.Cz 86/198 display sides to make the intercom dial the phonebook position defined by the selected floor number and button. The phonebook position is calculated as 6 x floor number + n, where n is 1 for a, 2 for b, 3 for c, and so on. This mode is available for models on...

  • Page 87

    2n telekomunikace a.S., www.2n.Cz 87/198 you can assign one function to each matrix position: numeric keypad keys 0 through 9, *, # or one of the quick dial buttons 1–16..

  • Page 88

    2n telekomunikace a.S., www.2n.Cz 88/198 5.3.6 buttons assign the directory / users users to the quick dial buttons. By default, all available intercom buttons are assigned to the listed users. A non-assigned button can be used for automation or switch activation, for example. Button function during...

  • Page 89

    2n telekomunikace a.S., www.2n.Cz 89/198 the bulk editing function is available in intercom models with more than 3 buttons. – reset the default button values, i.E. Assign button 1 to position 1, button 2 reset to position 2, etc. Remove all button assignments. Clear – display the list of all potent...

  • Page 90

    2n telekomunikace a.S., www.2n.Cz 90/198 5.3.7 backlight this tab helps you control the backlight level of nametags, buttons and brightness of signalling leds. If equipped with an ambient light level sensor, the intercom automatically chooses the suitable backlight level within the set range of valu...

  • Page 91

    2n telekomunikace a.S., www.2n.Cz 91/198 intensity by day set the led intensity percentage value for the day mode. – ntensity by night set the led intensity percentage value for the night mode – . If the intensity by day and night are set to one and the same value, intensity by the ambient light lev...

  • Page 92

    2n telekomunikace a.S., www.2n.Cz 92/198 5.3.8 display some intercom models ( ) can be equipped with a colour 2n ip vario, ® 2n ip verso ® lcd display. The device state is displayed (call progress, door opening, etc.) and the following modes are available: enable the display and language settings fo...

  • Page 93

    2n telekomunikace a.S., www.2n.Cz 93/198 list of parameters display (for 2n ® ip vario only) – enable this parameter to automatically display the name tags, display enabled phonebook and slideshow if necessary. When this parameter is disabled, the images recorded via http api are displayed only (ref...

  • Page 94

    2n telekomunikace a.S., www.2n.Cz 94/198 note if none of the pre-defined languages is convenient for you, proceed as follows: download the original language file (english). Modify the file using a text editor (replace the english texts with your own ones). Upload the modified localisation file to th...

  • Page 95

    2n telekomunikace a.S., www.2n.Cz 95/198 display (for 2n ® ip verso only) basic settings – enable/disable display of the phone book function. Phone book displayed entry keypad – enable the keypad/keypad type. Disabled – disable the keypad. Regular keypad – set the regular keypad type. – enable/disab...

  • Page 96

    2n telekomunikace a.S., www.2n.Cz 96/198 remove, download and upload a localisation file of your own. – custom language if none of the pre-defined languages is convenient for you, proceed as follows: download the original language file (english). Modify the file using a text editor (replace the engl...

  • Page 97

    2n telekomunikace a.S., www.2n.Cz 97/198 this tab helps you configure a structured list of users. You can create practically any count of groups and assign any count of users to each of the groups. One user cannot be assigned to one group more times, but one user can be assigned to more groups at th...

  • Page 98

    2n telekomunikace a.S., www.2n.Cz 98/198 name tags (for 2n ® ip vario only) if you do not like the default graphic appearance of the name tags, upload a background of your own to the intercom. Make sure that the image resolution is 320 x 208 pixels. Upload your name tags to the intercom to replace t...

  • Page 99

    2n telekomunikace a.S., www.2n.Cz 99/198 slideshow activation timeout – set the maximum idle time (i.E. During which the user does not control the device via the buttons or numeric keypad) in which the slideshow mode will be activated automatically. Slideshow transition time – set the image displayi...

  • Page 100

    2n telekomunikace a.S., www.2n.Cz 100/198 5.3.9 card reader this menu is available in the , and models only. 2n ip base ® 2n ip vario ® 2n ip force ® for only the option to limit unsuccessful access attempts is configured 2n ip verso ® here. Other card reader options can be configured in the menu. E...

  • Page 101

    2n telekomunikace a.S., www.2n.Cz 101/198 associated switch – set the number of the switch to be activated by tapping of a valid rfid card. The set value is not applied when a valid user card is tapped on the reader while the double authentication mode is enabled. In this case, a numeric switch acti...

  • Page 102

    2n telekomunikace a.S., www.2n.Cz 102/198 transmitted code format set the format for the codes to be transmitted – (wiegand 26, 32, 37 and raw). Change facility code – set the first code part via wiegand. This applies to wiegand out for 26-bit code format. Contact your security pbx supplier to know ...

  • Page 103

    2n telekomunikace a.S., www.2n.Cz 103/198 by adding an access card, the new user is saved into the card list in the directory / menu. Each user is automatically named as !Visitor #n, where n gives the user users number in the list..

  • Page 104

    2n telekomunikace a.S., www.2n.Cz 104/198 5.3.10 digital inputs in this configuration section set the parameters associated with digital inputs and their interconnections with other intercom functions. The digital inputs are available in selected intercom models or where appropriate equipment is ins...

  • Page 105

    2n telekomunikace a.S., www.2n.Cz 105/198 note secured state signalling is typically used with a security pbx connected to one of the intercom digital inputs. The wire leading from the pbx is connected to the intercom directly or via an extending module. The secured state led location is variable de...

  • Page 106

    2n telekomunikace a.S., www.2n.Cz 106/198 5.3.11 extenders the intercoms can be enhanced with extending modules connected to 2n ip verso ® the intercom basic unit. The following modules are available: five-button module keypad module infopanel module card reader module bluetooth module i/o module wi...

  • Page 107

    2n telekomunikace a.S., www.2n.Cz 107/198 note the extending modules are displayed in the order corresponding to their interconnection. The modules connected further from the basic unit are listed below. If more modules of the same type are connected to one intercom, it may be difficult to assign a ...

  • Page 108

    2n telekomunikace a.S., www.2n.Cz 108/198 output 1 maximum power – set the maximum load to be connected to the power output available on the basic unit. When the output is active, the consumption of the other modules (backlight level, etc.) can be adjusted automatically in order that the maximum all...

  • Page 109

    2n telekomunikace a.S., www.2n.Cz 109/198 no parameters are available to the public at present. Infopanel module configuration no parameters are available to the public at present. Card reader module configuration – set the module name for card reader logging purposes. Module name – set the passage ...

  • Page 110

    2n telekomunikace a.S., www.2n.Cz 110/198 – enable multiple user authentication via the card reader multiple authentication (or the user authentication option defined in ). Disable multiple directory / users authentication for a card reader to cancel code authentication via the numeric keypad. – set...

  • Page 111

    2n telekomunikace a.S., www.2n.Cz 111/198 multiple authentication – enable multiple user authentication via this module (or, authentication is controlled by the user card settings; refer to directory / users). Multiple authentication can be disabled for each reader connected to the intercom. Associa...

  • Page 112

    2n telekomunikace a.S., www.2n.Cz 112/198 wiegand module configuration the wiegand module is equipped with the input and output wiegand interfaces, which are mutually independent, have separate settings and can receive and send codes at the same time. The wiegand input helps you connect such equipme...

  • Page 113

    2n telekomunikace a.S., www.2n.Cz 113/198 module name set the module name for input/output specification in the – setoutput, getinput and inputchanged objects in the settings. Automation direction – set the passage direction for the card reader (not specified, in, out) for the attendance system purp...

  • Page 114

    2n telekomunikace a.S., www.2n.Cz 114/198 display module configuration fingerprint reader module configuration module name – set the module name for logging events from the fingerprint reader. Associated switch set the number of the switch to be activated whenever a – valid code is received . – read...

  • Page 115

    2n telekomunikace a.S., www.2n.Cz 115/198 5.4 services here is what you can find in this section: 5.4.1 phone 5.4.2 streaming 5.4.3 onvif 5.4.4 e-mail 5.4.5 mobile key 5.4.6 automation 5.4.7 http api 5.4.8 user sounds 5.4.9 web server 5.4.10 audio test 5.4.11 snmp.

  • Page 116

    2n telekomunikace a.S., www.2n.Cz 116/198 5.4.1 phone the phone service is one of the basic functions of the intercom: helps you establish connections with other ip network terminal equipment. The support 2n ip intercoms the extended sip and are compatible with and certified by the leading sip pbx a...

  • Page 117

    2n telekomunikace a.S., www.2n.Cz 117/198 sip proxy – is an ip network server responsible for call routing (call transfer to another entity closer to the destination). There can be one or more sip proxy units between the users. Sip registrar – is an ip network server responsible for user registratio...

  • Page 118

    2n telekomunikace a.S., www.2n.Cz 118/198 display name – set the name to be displayed as clip on the called party's phone. Phone number (id) – set the intercom phone number (or another unique id including characters and digits). Together with the domain, this number represents a unique intercom iden...

  • Page 119

    2n telekomunikace a.S., www.2n.Cz 119/198 use authentication id – enable the use of an alternative id for intercom authentication. If disabled, the phone number defined above is used for authentication. Authentication id – enter the alternative id for authentication. Password – enter the password fo...

  • Page 120

    2n telekomunikace a.S., www.2n.Cz 120/198 registration enabled – enable intercom registration with the set sip registrar. Registrar address – set the sip registrar ip address or domain name. Registrar port – set the sip registrar port (typically 5060). Registration expires – define the registration ...

  • Page 121

    2n telekomunikace a.S., www.2n.Cz 121/198 user certificate – specify the user certificate and private key to verify the intercom authorisation to communicate with the sip server. There are three sets of user certificates and private keys, refer to the certificates subsection. Local sip port – set th...

  • Page 122

    2n telekomunikace a.S., www.2n.Cz 122/198 call answering mode – set the incoming call receiving mode: - the always busy intercom rejects incoming calls, - the intercom alerts incoming calls and manual the user answers them using a numeric keypad button, and - the automatic intercom answers incoming ...

  • Page 123

    2n telekomunikace a.S., www.2n.Cz 123/198 sending mode – define whether it will be possible to send dtmf during a call by pressing 0 through 9, * and # on the intercom numeric keypad. Set the sending mode for incoming/outgoing/all calls. In-band (audio) – enable classic dtmf dual tone sending in the...

  • Page 124

    2n telekomunikace a.S., www.2n.Cz 124/198 qos dscp value – set the audio rtp packet priority in the network. The set value is sent in the tos (type of service) field in the ip packet header. Value is entered in decimal format. The parameter is not applied until the intercom is restarted. Jitter comp...

  • Page 125

    2n telekomunikace a.S., www.2n.Cz 125/198 qos dscp value – set the video rtp packet priority in the network. The set value is sent in the tos (type of service) field in the ip packet header. Maximum packet size – set the size limit for the video rtp packets to be sent. H.264 payload type (1) – set t...

  • Page 126

    2n telekomunikace a.S., www.2n.Cz 126/198 2n ® indoor touch tab this tab contains settings for connection of the devices the 2n indoor touch ® intercom. The main parameter is the access key, which secures the connection and enables you to create multiple independent groups of intercoms and 2n indoor...

  • Page 127

    2n telekomunikace a.S., www.2n.Cz 127/198 – set the multicast address to which the intercom video stream multicast group shall be sent. Select one of the 8 preset addresses or set the mode in which the intercom selects the address automatically. – display the current count of number of registered de...

  • Page 128

    2n telekomunikace a.S., www.2n.Cz 128/198 5.4.2 streaming the provide several audio/video streaming methods; refer to the 2n ip intercoms table below: transmission method description jpeg/http static jpeg image transmission. Refer to the jpeg tab below. Mjpeg /http a series of consecutive jpeg image...

  • Page 129

    2n telekomunikace a.S., www.2n.Cz 129/198 explanation of terms rtp (real-time transport protocol) – is a protocol defining the standard packet format for audio/video transmission via ip networks. Employs 2n ip intercom this protocol for audio/video streaming. The rtp transport protocol is either udp...

  • Page 130

    2n telekomunikace a.S., www.2n.Cz 130/198 1. A. B. C. List of parameters rtsp the integrate an rtsp server, which can be configured in this tab. The 2n ip intercoms rtsp server allows for audio/video streaming. You can choose the data transmission method, video compression method/parameters and othe...

  • Page 131

    2n telekomunikace a.S., www.2n.Cz 131/198 video stream enabled – enable offering of video stream while establishing connection with the rtsp server. Video codec – set the default video codec for rtsp streaming. Anonymous access – enables access to the rtsp server without user authentication. If this...

  • Page 132

    2n telekomunikace a.S., www.2n.Cz 132/198 ip address 1–4 – set up to 4 authorised ip addresses from which you can log in to the rtsp server. If none of the four fields is completed, any ip address can be used for login. Qos dscp value – set the audio/video rtp packet priority in the network. The set...

  • Page 133

    2n telekomunikace a.S., www.2n.Cz 133/198 jpeg here configure the simplest way of video streaming: jpeg/http and mjpeg/http. Send the following get address query to download images from the intercom: http://intercom_ip_address/api/camera/snapshot?Width=w&height=h or (for mjpeg, http server push): ht...

  • Page 134

    2n telekomunikace a.S., www.2n.Cz 134/198 jpeg compression level – set the jpeg compression level (1–99). The recommended value is 85. The parameter affects the image size and quality. Some ip phones (snom 820/870) do not support video calls but are able to download and display jgeg snapshots from t...

  • Page 135

    2n telekomunikace a.S., www.2n.Cz 135/198 codec – set the audio codec for rtp packet decoding: pcmu, pcma, g.722, l.16. The g.722 and l16 broadband codecs are available in selected intercom models only. Multicast sender enabled – enable rtp packet sending to the selected multicast address and port. ...

  • Page 136

    2n telekomunikace a.S., www.2n.Cz 136/198 broadcast enabled – enable the broadcast command to set up an audio stream sent from the informacast server to the intercom. Capture enabled – enable the capture command to set up an audio stream sent from the intercom to the informacast server. Listen enabl...

  • Page 137

    2n telekomunikace a.S., www.2n.Cz 137/198 – set the ftp server username. The parameter is mandatory if the ftp username server requires user authentication. – set a password for the above mentioned ftp server user. Password – select the passive transmission mode (as web browser). Passive mode remote...

  • Page 138

    2n telekomunikace a.S., www.2n.Cz 138/198 click to save the current ftp server configuration, load the camera apply & test image and save the image to the ftp server. The window above displays the ftp server communication details during saving..

  • Page 139

    2n telekomunikace a.S., www.2n.Cz 139/198 5.4.3 onvif list of parameters the are onvif compatible and fully implement the onvif profile s. 2n ip intercoms – enable the ws-discovery function, which allows other enable ws discovery devices (onvif clients) to discover compatible lan devices. Enable thi...

  • Page 140

    2n telekomunikace a.S., www.2n.Cz 140/198 1. A. B. C. D. Be sure to set one user account at least and the proper access level (according to onvif specification and used vms) to achieve . Without this, full onvif functionality the basic functionality is only available. Enabled – e nable/disable the u...

  • Page 141

    2n telekomunikace a.S., www.2n.Cz 141/198 5.4.4 e-mail to inform the intercom users on all missed and/or successfully completed calls, configure to send an e-mail after every call to the called user. You can 2n ip intercom compile the e-mail subject and message text of your own. If your intercom is ...

  • Page 142

    2n telekomunikace a.S., www.2n.Cz 142/198 server address – set the smtp server address to which e-mails shall be sent. Server port – specify the smtp server port. Modify the value only if the smtp server setting is substandard. The typical smtp port value is 25. Username – enter a valid username for...

  • Page 143

    2n telekomunikace a.S., www.2n.Cz 143/198 deliver in – set the time limit for delivering an e-mail to an inaccessible smtp server. Click to send a testing e-mail to the defined address with the aim to test apply & test the functionality of the current e-mail sending setting. Enter the destination e-...

  • Page 144

    2n telekomunikace a.S., www.2n.Cz 144/198 e-mail on call set e-mail sending during outging calls on this tab. Send e-mail at – set e-mail sending upon outgoing phone calls. The e-mail is sent when the connection is terminated. The following options are available: any outgoing call – an e-mail will b...

  • Page 145

    2n telekomunikace a.S., www.2n.Cz 145/198 1. A. B. C. D. Body – edit the text to be sent. Use the html formatting marks in the text. You can insert special symbols substituting the username, date and time, intercom identification or called number, which will be replaced with the actual value before ...

  • Page 146

    2n telekomunikace a.S., www.2n.Cz 146/198 1. A. B. C. D. E. F. All accesses – e-mail shall be sent whenever any rfid card is tapped on the card reader and/or bluetooth/fingerprint reader identification is made. Default to – the intercom sends messages to the e-mail address specified for the user whe...

  • Page 147

    2n telekomunikace a.S., www.2n.Cz 147/198 attach snapshot – enable sending of an attachment including one camera snapshot taken during ringing or calling. Snapshot resolution – set the snapshot resolution for the image to be sent..

  • Page 148

    2n telekomunikace a.S., www.2n.Cz 148/198 5.4.5 mobile key the equipped with the bluetooth module allow for user 2n ip intercoms authentication via the application available to devices with ios 8.1 and 2n mobile key ® higher (iphone 4s and higher phones) or android 4.4 kitkat and higher (bluetooth 4...

  • Page 149

    2n telekomunikace a.S., www.2n.Cz 149/198 encryption keys and locations the – intercom communication is always encrypted. 2n mobile key ® 2n mobile key ® cannot authenticate a user without knowing the encryption key. The primary encryption key is automatically generated upon the intercom first launc...

  • Page 150

    2n telekomunikace a.S., www.2n.Cz 150/198 encryption key administration the intercom can keep up to 4 valid encryption keys: 1 primary and up to 3 secondary ones. A mobile device can use any of the 4 keys for communication encryption. The encryption keys are fully controlled by the system administra...

  • Page 151

    2n telekomunikace a.S., www.2n.Cz 151/198 – by generating a new primary encryption key you delete restore primary key the oldest secondary key. Thus, the users that still use this key 2n mobile key ® will not be able to authenticate themselves unless they have updated the encryption keys in their mo...

  • Page 152

    2n telekomunikace a.S., www.2n.Cz 152/198 1. 2. Tip in the case of loss of a mobile phone with access data proceed as follows: delete the mobile key auth id value for the user to block the lost phone and avoid misuse. Re-generate the primary encryption key (optionally) to avoid misuse of the encrypt...

  • Page 153

    2n telekomunikace a.S., www.2n.Cz 153/198 5.4.6 automation the highly flexible setting options to satisfy variable user needs. There 2n ip provides are situations in which the standard configuration settings (switch or call modes, e.G.) are insufficient and so offers , a special programmable 2n ip i...

  • Page 154

    2n telekomunikace a.S., www.2n.Cz 154/198 5.4.7 http api http api is an application interface designed for control of selected 2n ip intercom functions via the . It enables to be integrated easily with third http 2n ip intercoms party products, such as home automation, security and monitoring system...

  • Page 155

    2n telekomunikace a.S., www.2n.Cz 155/198 refer to the configuration manual for the http api function and http api configuration details. Note full http api function is available with the gold or enhanced integration licence only. Only camera api is available without this licence. Tip for the video ...

  • Page 156

    2n telekomunikace a.S., www.2n.Cz 156/198 1. A. B. C. D. E. F. G. 5.4.8 user sounds the provide standard signalling of operational statuses by tone 2n ip intercoms sequences; refer to the signalling of operational statuses subsection. If you find the standard sound signalling inconvenient, modify th...

  • Page 157

    2n telekomunikace a.S., www.2n.Cz 157/198 frequency bits for sample sound length quality 8 khz 8 bit up to 32 s 4 low you can also play the recorded files via automation using the action.Playusersound and, optionally, with the aid of the intercom speaker and/or directly into the phone call. List of ...

  • Page 158

    2n telekomunikace a.S., www.2n.Cz 158/198 press to upload a sound file to the intercom. Select a file from your pc via a dialogue window and push . Press to remove a file. Press to replay the upload sound file (locally on your pc). You can record a sound file using your pc microphone. Press to start...

  • Page 159

    2n telekomunikace a.S., www.2n.Cz 159/198 announcement scheduler the announcement scheduler helps you play user sounds periodically at a preset time. You can set days in a week on which the sound shall be played. Click the required day time axis point to add sound playing. While adding, set the exac...

  • Page 160

    2n telekomunikace a.S., www.2n.Cz 160/198 tip refer to https://wiki.2n.Cz/hip/inte/latest/en/10-media-applications for user sound creating details. /audacity note the sound recording function is unavailable in the browsers that do not support the webrtc standard (internet explorer, e.G.)..

  • Page 161

    2n telekomunikace a.S., www.2n.Cz 161/198 1. A. B. C. D. 5.4.9 web server you can configure your using a standard browser which accesses the 2n ip intercom integrated web server. Use the secured https protocol for communication between the browser and intercom. Having accessed the intercom, enter th...

  • Page 162

    2n telekomunikace a.S., www.2n.Cz 162/198 list of parameters device name – set the device name to be displayed in the right upper corner of the web interface, login window and other applications if available (2n ® network scanner, etc). Web interface language – set the default language for administr...

  • Page 163

    2n telekomunikace a.S., www.2n.Cz 163/198 – download the original file containing all the user interface original language texts in english. The file format is xml; see below. – record, load and remove, if necessary, a user file containing user language your own user interface text translations. Xml...

  • Page 164

    2n telekomunikace a.S., www.2n.Cz 164/198 5.4.10 audio test the allow you to perform periodical tests of the integrated speaker 2n ip intercoms and microphone. For the test purpose, the integrated speaker generates one or more short beeps. The integrated microphone receives the generated tone and th...

  • Page 165

    2n telekomunikace a.S., www.2n.Cz 165/198 list of parameters audio test enabled – enable automatic execution of the audio test. Test period – set the test period: daily or weekly. Test start time – set the test starting time in the hh:mm format. We recommend you to set a time at which a low intercom...

  • Page 166

    2n telekomunikace a.S., www.2n.Cz 166/198 5.4.11 snmp the integrate a remote intercom supervision functionality via the 2n ip intercoms snmp. The integrated snmp agent becomes available when the enhanced integration licence key is added. The intercoms support the snmp version 2c. List of parameters ...

  • Page 167

    2n telekomunikace a.S., www.2n.Cz 167/198 contact – enter the device manager contact (name, e-mail, etc.). – enter the device name. Name – enter the device location (1st floor, e.G.). Location ip address– enter up to 4 valid ip addresses for snmp agent access to block access from other addresses. If...

  • Page 168

    2n telekomunikace a.S., www.2n.Cz 168/198 5.5 system here is what you can find in this section: 5.5.1 network 5.5.2 date and time 5.5.3 licence 5.5.4 certificates 5.5.5 auto provisioning 5.5.6 syslog 5.5.7 maintenance.

  • Page 169

    2n telekomunikace a.S., www.2n.Cz 169/198 5.5.1 network as the is connected to the lan, make sure that its ip address has been 2n ip intercom set correctly or obtained from the lan dhcp server. Configure the ip address and dhcp in the subsection. Network tip to know the current ip address of your in...

  • Page 170

    2n telekomunikace a.S., www.2n.Cz 170/198 list of parameters network basic use dhcp server – enable automatic obtaining of the ip address from the lan dhcp server. If the dhcp server is unavailable or inaccessible in your lan, use the manual network settings. Static ip address – static ip address of...

  • Page 171

    2n telekomunikace a.S., www.2n.Cz 171/198 vlan enabled – enable the virtual network (vlan) support (according to recommendation 802.1q). Set the virtual network id too to make the function work properly. – select a virtual network id in the range of 1-4094. The device shall vlan id receive only the ...

  • Page 172

    2n telekomunikace a.S., www.2n.Cz 172/198 802.1x device identity – username (identity) for authentication via eap-md5 and eap- tls. Md5 authentication enabled – enable authentication of network devices via the 802.1x eap-md5 protocol. Do not enable this function if your lan does not support 802.1x. ...

  • Page 173

    2n telekomunikace a.S., www.2n.Cz 173/198 note this function is available with the gold or enhanced security licence only. Trace in the tab, you can launch capturing of incoming and outgoing packets on the trace intercom network interface. The captured packets are stored in a 4 mb buffer. When the b...

  • Page 174

    2n telekomunikace a.S., www.2n.Cz 174/198 5.5.2 date and time if you control validity of phone numbers, lock activation codes and similar by time profiles, make sure that the intercom internal date and time are set correctly. Most models are equipped with a back-up real-time clock to withstand 2n ip...

  • Page 175

    2n telekomunikace a.S., www.2n.Cz 175/198 list of parameters synchronise – push the button to synchronise the intercom time value with your pc time value. Time zone – set the time zone for the installation site to define time shifts and winter/summer time transitions. Time zone rule – if the interco...

  • Page 176

    2n telekomunikace a.S., www.2n.Cz 176/198 5.5.3 licence some functions are available with a valid licence key only. Refer to the 2n ip intercom subsection for the list of intercom licensing model differences and function licensing options. List of parameters licence key – enter the valid licence key...

  • Page 177

    2n telekomunikace a.S., www.2n.Cz 177/198 – check whether the functions activated by the enhanced enhanced security security licence are available. – check whether the functions activated by the enhanced audio enhanced audio licence are available. – check whether the functions activated by the enhan...

  • Page 178

    2n telekomunikace a.S., www.2n.Cz 178/198 1. A. B. C. D. 5.5.4 certificates some network services use the transaction layer security (tls) 2n ip intercom protocol for communication with other lan devices to prevent third parties from monitoring and/or modifying the communication contents. Unilateral...

  • Page 179

    2n telekomunikace a.S., www.2n.Cz 179/198 note if you use the self signed certificate for encryption of the intercom web server – browser communication, the communication is secure, but the browser will warn you that it is unable to verify the intercom certificate validity. Refer to the tables below...

  • Page 180

    2n telekomunikace a.S., www.2n.Cz 180/198 note it is possible that certificate with private rsa key longer than 2048 bits will be rejected and following message will be displayed: private key file or private key password was not accepted by device !.

  • Page 181

    2n telekomunikace a.S., www.2n.Cz 181/198 1. 2. 3. 1. 2. 3. 5.5.5 auto provisioning the help you update firmware and configuration manually, or 2n ip intercoms automatically from a storage on a tftp/http server selected by you according to predefined rules. You can configure the tftp and http server...

  • Page 182

    2n telekomunikace a.S., www.2n.Cz 182/198 3. 4. 5. 6. Sf – 2n ® ip safety ak – 2n ® ip audio kit vk – ip video kit 2n ® ve – ip verso 2n ® macaddr is the mac address of the intercom in the 00-00-00-00-00-00 format. Find the mac address on the intercom production plate or in the tab intercom status v...

  • Page 183

    2n telekomunikace a.S., www.2n.Cz 183/198 address retrieval mode – select whether the tftp/http server address shall be entered manually or a value retrieved automatically from the dhcp server using option 66 shall be used. Server address – enter the tftp ( ), http ( ) or tftp://ip_address http://ip...

  • Page 184

    2n telekomunikace a.S., www.2n.Cz 184/198 update at – set the update time in the hh:mm format for periodical updating at a low-traffic time. The parameter is not applied if the update period is set to a value shorter than 1 day. Next update at – set the next update time. Last update at – last update...

  • Page 185

    2n telekomunikace a.S., www.2n.Cz 185/198 result description file is invalid the file to be downloaded is corrupted or of a wrong type. Firmware is up to date the firmware update attempt reveals that the latest firmware version has been loaded. Update succeeded the configuration/firmware update has ...

  • Page 186

    2n telekomunikace a.S., www.2n.Cz 186/198 display the current acs connection state or error state – connection status description if necessary. – test the tr069 connection according to the set profile, see connection test the active profile. The test result is displayed in the connection status. Uni...

  • Page 187

    2n telekomunikace a.S., www.2n.Cz 187/198 5.5.6 syslog the allow you to send system messages to the syslog server 2n ip intercoms including relevant information on the device states and processes for recording, analysis and audit. It is unncecessary to configure this service for common intercom oper...

  • Page 188

    2n telekomunikace a.S., www.2n.Cz 188/198 5.5.7 maintenance use this menu to maintain your intercom configuration and firmware. You can back up and reset all parameters, update firmware and/or reset default settings here. Restore configuration – reset configuration from the preceding backup. Press t...

  • Page 189

    2n telekomunikace a.S., www.2n.Cz 189/198 caution the default state reset deletes the licence key if any. Hence, we recommend you to copy it to another storage for later use. Upgrade firmware – upgrade your intercom firmware. Press the button to display a dialogue window for you to select and upload...

  • Page 190

    2n telekomunikace a.S., www.2n.Cz 190/198 5.6 used ports service port protocol direction configurable configuration 802.1x – – in/out no – dhcp 68 udp in/out no – dns 53 tcp /udp in/out no – echo (device discovery)* 8002 udp in/out no – ftp 21 tcp out no – 2n ip eye ® 8003 udp out no – http 80 tcp i...

  • Page 191

    2n telekomunikace a.S., www.2n.Cz 191/198 service port protocol direction configurable configuration singlewire commands 80 tcp in/out no – singlewire communication 8081 tcp out no – singlewire discovery 427 udp in/out no – singlewire media 20000 - udp in no – sip 5060, 5062 tcp /udp in/out yes phon...

  • Page 192

    2n telekomunikace a.S., www.2n.Cz 192/198 6. Supplementary information here is what you can find in this section: 6.1 troubleshooting 6.2 directives, laws and regulations 6.3 general instructions and cautions.

  • Page 193

    2n telekomunikace a.S., www.2n.Cz 193/198 6.1 troubleshooting for the most frequently asked questions refer to . Faq.2n.Cz.

  • Page 194

    2n telekomunikace a.S., www.2n.Cz 194/198 6.2 directives, laws and regulations europe 2n ip intercom ® conforms to the following directives and regulations: directive 1999/5/ec of the european parliament and of the council, of 9 march 1999 - on radio equipment and telecommunications terminal equipme...

  • Page 195

    2n telekomunikace a.S., www.2n.Cz 195/198 this equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur ...

  • Page 196

    2n telekomunikace a.S., www.2n.Cz 196/198 6.3 general instructions and cautions please read this user manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may resu...

  • Page 197

    2n telekomunikace a.S., www.2n.Cz 197/198 the consumer shall, without delay, change the access password for the product after installation. The manufacturer shall not be held liable or responsible for any damage incurred by the consumer in connection with the use of the original password. The manufa...

  • Page 198

    2n telekomunikace a.S., www.2n.Cz 198/198 2n telekomunikace a.S. Modřanská 621, 143 01 prague 4, czech republic phone: +420 261 301 500, fax: +420 261 301 599 e-mail: sales@2n.Cz web: www.2n.Cz v2.22.