- DL manuals
- 2N
- Telephone
- VoiceBlue Next
- User Manual
2N VoiceBlue Next User Manual
Summary of VoiceBlue Next
Page 1
Www.2n.Cz version firmware 2n ® voiceblue next user manual 1.24 3.11.
Page 2: Content
The 2n telekomunikace a.S. Is a czech manufacturer and supplier of telecommunications equipment. The product family developed by 2n telekomunikace a.S. Includes gsm gateways, private branch exchanges (pbx), and door and lift communicators. 2n telekomunikace a.S. Has been ranked among the czech top c...
Page 3: Content
Content 1. Product overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 1.2 safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4: 1. Product Overview
4 2n telekomunikace a.S., www.2n.Cz ® 1. Product overview in this section, we introduce the product, outline its application 2n voiceblue next ® options and highlight the advantages following from its use. This section also includes safety instructions. Here is what you can find in this section: 1.1...
Page 5: 1.1 Product Description
5 2n telekomunikace a.S., www.2n.Cz ® 1.1 product description 2n voiceblue next ® is a device that helps directly interconnect a sip-supporting voip network with gsm networks and can be used for direct connection with a telephone set. The voice mode, i.E. Outgoing and incoming calls, is the basic fu...
Page 6: 1.2 Safety Precautions
6 2n telekomunikace a.S., www.2n.Cz ® 1.2 safety precautions it is prohibited to use any transmitters, including the umts/gsm devices, in areas where explosives are used, such as quarries. It is prohibited to use the gsm gateways at petrol stations where mobile telephones are also prohibited. Gsm ph...
Page 7: 1.3 Upgrade
7 2n telekomunikace a.S., www.2n.Cz ® 1.3 upgrade the manufacturer reserves the right to modify the product in order to improve its qualities. In response to the customers' requirements, the manufacturer constantly improves the software contained in the product (firmware). For the latest firm 2n voi...
Page 8: 1.4 Terms and Symbols Used
8 2n telekomunikace a.S., www.2n.Cz ® 1.4 terms and symbols used symbols in manual the following symbols and pictograms are used in the manual: future functions, innovations the in this document designates the functions that are under grey-marked text preparation or development at present. Safety by...
Page 9
9 2n telekomunikace a.S., www.2n.Cz ® 2. Description and installation this section describes the proper product installation and 2n voiceblue next ® connection. Here is what you can find in this section: 2.1 before you start 2.2 factory settings 2.3 brief installation guide 2.4 ip voice transmission...
Page 10: 2.1 Before You Start
10 2n telekomunikace a.S., www.2n.Cz ® 2.1 before you start product completeness check before installing this product, check whether the delivery 2n voiceblue next ® complies with the following packing list. Be careful because there may be differences in the packing list depending on whether you hav...
Page 11: Status Led Indicators
11 2n telekomunikace a.S., www.2n.Cz ® connector lay-out (4-channel version) the following connectors are mounted on the bottom: 2n voiceblue next ® 10/100baset ethernet connector with poe support reset button – press for a short time to restart the gsm gateway and for a long time to restart the gsm...
Page 12
12 2n telekomunikace a.S., www.2n.Cz ® sim card placement (2-channel version) lift off the sim card holder on the backside, insert the sim card 2n voiceblue next ® and replace the holder, securing the latch. Sim card placement (4-channel version) insert a sim card into one of the four sim holders on...
Page 13: Licences
13 2n telekomunikace a.S., www.2n.Cz ® licences 2n voiceblue next ® may contain time-limited software licences (sip signalling, mobility extension, e.G.) that render services for limited hours only. Every gateway restart adds one hour to the internal licence counter. To check the current licence sta...
Page 14: Potential Gsm/umts Troubles
14 2n telekomunikace a.S., www.2n.Cz ® potential gsm/umts troubles all 2n gsm gateways work reliably under a long-time full load. The following problems may be caused by gsm/umts networks: gsm/umts module(s) cannot log in, log in slowly, or log out occasionally. This problem may be caused by any of ...
Page 15: 2.2 Factory Settings
15 2n telekomunikace a.S., www.2n.Cz ® 2.2 factory settings the table below includes the factory settings for the key configuration parameters of the gsm gateway: ip address: 192.168.1.2 ip mask: 255.255.255.0 ip gateway: 192.168.1.1 username: admin password: 2n caution remember to the username and ...
Page 16: 2.3 Brief Installation Guide
16 2n telekomunikace a.S., www.2n.Cz ® 2.3 brief installation guide sim card inserting/removing for the correct handling of sim cards refer to the sim card placement subsection. Installation conditions the following installation conditions have to be met for proper installation: 2n voiceblue next ® ...
Page 17
17 2n telekomunikace a.S., www.2n.Cz ® 1. 2. Higher than with mobile phones as, generally, gateways shared by multiple users show a very high traffic. Make sure that the voip connection has been configured properly according to the sip and other voip recommendations. It is recommended that the power...
Page 18: Single Mounting
18 2n telekomunikace a.S., www.2n.Cz ® 1. 2. 3. 1. Horizontal mounting (4-chanel version) 2n voiceblue next ® is ready for mounting on a horizontal support. You can stick rubber feet (included in the delivery) on the device if necessary. Follow the instructions below: put the gsm gateway carefully o...
Page 19: Pair Mounting
19 2n telekomunikace a.S., www.2n.Cz ® 1. 2. 1. 2. Fit the rack wings to the right and left sides using four screws for each wing (included in the package). The positions of the long and short wings are optional and depend on the installation site conditions. Having screwed the wings, place the gsm ...
Page 20: Power Supply Connection
20 2n telekomunikace a.S., www.2n.Cz ® 2. 3. Place the gsm gateway pair into a free 1u place in the system rack and fit it with four rack screws (included in the package). Power supply connection use only the power supply adapter included, or, with the power over ethernet, a certified poe adapter to...
Page 21: Antenna Connection
21 2n telekomunikace a.S., www.2n.Cz ® antenna connection 2n voiceblue next ® is equipped with a sma female antenna connector for all the gsm/umts modules. The external antenna should always be installed vertically on a site with a good wireless signal. Ethernet cable connection to connect into an e...
Page 22: Antenna Splitter
22 2n telekomunikace a.S., www.2n.Cz ® rj-45 connector for lan connection antenna splitter the antenna splitter is a passive component that combines multiple gsm/umts channels into one antenna. In , it combines two/four antennae 2n voiceblue next ® into one. The antenna splitter is placed in the ins...
Page 23: 2.4 Ip Voice Transmission
23 2n telekomunikace a.S., www.2n.Cz ® 2.4 ip voice transmission speech encoding methods voice transmission is strictly separated from signalling in voip networks. Modern voip networks mostly use the rtp (realtime transport protocol) for voice transmission. The purpose of the rtp is only to transmit...
Page 24: Sip Components
24 2n telekomunikace a.S., www.2n.Cz ® sip components the following components are involved in the sip message exchange: uac (user agent client) – the terminal device client, which initiates sip signalling. Uas (user agent server) – the terminal device server, which responds to sip signalling from t...
Page 25
25 2n telekomunikace a.S., www.2n.Cz ®.
Page 26: Sip / H.323 Interconnection
26 2n telekomunikace a.S., www.2n.Cz ® 2.5 voiceblue next connection to voip since communicates using the sip only, this subsection outlines 2n voiceblue next ® solutions for its interconnection with networks working with the h.323 signalling protocols. Can be used either in the point-to-point or 2n...
Page 27
27 2n telekomunikace a.S., www.2n.Cz ® all calls outbound to gsm are routed to the gateway in the 2n voiceblue next ® point-to-point mode that uses . 2n voiceblue next ® point-to-multipoint configuration point-to-multipoint is a classical scheme of a distributed voip network with one or more sip pro...
Page 28: 3. Voiceblue Next
28 2n telekomunikace a.S., www.2n.Cz ® 3. Voiceblue next configuration this section describes the configuration. 2n voiceblue next ® here is what you can find in this section: 3.1 factory reset 3.2 basic configuration – step by step 3.3 call routing 3.4 web configuration interface gateway control ga...
Page 29: 3.1 Factory Reset
29 2n telekomunikace a.S., www.2n.Cz ® 3.1 factory reset if you forget the password or set the ip interface incorrectly, you can press the reset button to the right of the rj45 ethernet connector for a long time. Doing this, you restore the factory default configuration values for all parameters, in...
Page 30
30 2n telekomunikace a.S., www.2n.Cz ® 3.2 basic configuration – step by step this section will help put your gateway in operation for the first 2n voiceblue next ® time. Refer to all subsections for detailed settings. S. 3 install the gsm gateway as instructed in before the first start, remove subs...
Page 31: 3.3 Call Routing
31 2n telekomunikace a.S., www.2n.Cz ® 3.3 call routing calls from a voip port to a gsm/umts network are routed to any gsm/umts port according to the lcr (least cost routing) table. If an incoming call is routed via a busy port, other ports are checked automatically for availability (depending on th...
Page 32
32 2n telekomunikace a.S., www.2n.Cz ® model situation “follow me” function figure 1: follow me function fig. 1 shows routing of calls in the case of absence of a subscriber in the voip network. Subscriber a calls subscriber b, for whom the function has 2n mobility extension ® been permitted with th...
Page 33
33 2n telekomunikace a.S., www.2n.Cz ® does not answer the call in the voip network and so the call is rerouted to its mobile telephone. Subscriber b does not answer the mobile phone call and is sent a text announcing that the call from subscriber a has been missed. "call forwarding" function in add...
Page 34: Lcr Table
34 2n telekomunikace a.S., www.2n.Cz ® figure 4: quick call forwarding function correct me configuration: connect the gsm gateway to your pbx/sip proxy. Check whether the licence key has been entered 2n mobility extension ® correctly. Enter all me users in the menu. Gateway configuration / mobility ...
Page 35
35 2n telekomunikace a.S., www.2n.Cz ® make sure that the apriopriate provider's sim card is inserted in the gsm gateway. Assign the incoming and outgoing groups in the gateway configuration gsm / menu. Groups assignment for a call setup, the lcr table is searched sequentially from top to bottom. Ea...
Page 36
36 2n telekomunikace a.S., www.2n.Cz ® if the selected gsm/umts module is available and has a sufficient credit, the gsm gateway will start dialling the gsm number. If the calling subscriber number has an unknown prefix or all routes are occupied, rejects the connection request. 2n voiceblue next ® ...
Page 37: Disa Welcome Note
37 2n telekomunikace a.S., www.2n.Cz ® disa welcome note if the disa service is active and a welcome note has been recorded, the welcome note is played to every incoming call whose number is not included in the clip table or forwarded according to the dynamic clip routing table. When the welcome not...
Page 38: Essential Data
38 2n telekomunikace a.S., www.2n.Cz ® 3.4 web configuration interface essential data the web interface supports the following web browsers: 2n voiceblue next ® ms internet explorer v9 mozilla firefox v4 and higher any other web browsers may cause troubles. The recommended screen resolution is 1280x...
Page 39: Web Icons
39 2n telekomunikace a.S., www.2n.Cz ® web icons home page having logged in, you get to the home page as shown in the figure below. Gateway there is a menu on the left, which includes the gateway control and gateway configuration items. The right-hand upper corner displays the current state of the l...
Page 40
40 2n telekomunikace a.S., www.2n.Cz ® sim client – for connection to the system. 2n sim star ® sms – for receiving/sending sms via the web interface. Messaging – for receiving/sending sms via smpp or smtp/pop3 monitoring – for gateway monitoring via snmp utils – including extending system tools (ne...
Page 41: Gateway Control
41 2n telekomunikace a.S., www.2n.Cz ® gateway control this group helps: monitor the current statuses of the gsm gateway components; check and set the gsm gateway licence; view and save log files and cdr. Firmware / licence this window provides information on the gateway licensing, firmware and boot...
Page 42
42 2n telekomunikace a.S., www.2n.Cz ® licence key for gateway – item for entering a new gateway connecting licence. Date/time the date/time window enables you to set the current date and time for the gateway. Select the item and the and items will be set synchronise with local pc time date automati...
Page 43
43 2n telekomunikace a.S., www.2n.Cz ® remark].Wav". You can upload more than one message in *.Tar file. Log file the log file window helps read out the gateway log file. The bottom part of the window includes icons for saving the log file into a file and refreshing the log listing in the web window...
Page 44
44 2n telekomunikace a.S., www.2n.Cz ® sdr file the sdr file window helps read out the sms data records (sdr) of the gateway. The bottom part of the window includes icons for saving the sdr into a file and refreshing the sdr listing in the web window. Refer to subs. Sdr line description for more det...
Page 45
45 2n telekomunikace a.S., www.2n.Cz ® sip registration the window displays the current sip registration state of the gateway. Online report the window displays on-line gateway tracing. Note the maximum autoclip routing table capacity is 256 records..
Page 46: Gateway Configuration
46 2n telekomunikace a.S., www.2n.Cz ® gateway configuration system parameters general saving call data (cdr) – select the call types on which records are to be saved into the cdr file. Gateway id – identifies numerically in the cdr in case 2n voiceblue next ® multiple devices generate the cdr in th...
Page 47
47 2n telekomunikace a.S., www.2n.Cz ® others pin – pin code for the sim cards that request the pin code. End of dialling (empty=off) – a selectable dtmf code for dtmf dialling end in the event of a disa incoming call. The default value is '#'. Voip parameters voip functions day of deleting statisti...
Page 48
48 2n telekomunikace a.S., www.2n.Cz ® voice parameters first rtp port (even: 1024 – 65524) – number of the first rtp port. The number must be even as recommended. Last rtp port (even: first rtp+10 – 65534) – number of the last rtp port. The number must be even as recommended. The recommended minimu...
Page 49
49 2n telekomunikace a.S., www.2n.Cz ® tones generated to voip ring tone to voip – generate a ringing tone of your own, or transmit a real ringing tone from the gsm/umts networks. Gsm basic parameters gsm selection assignment of gsm-channel cyclical smart - least used minutes smart - most remaining ...
Page 50
50 2n telekomunikace a.S., www.2n.Cz ® calls relax timeout [s] – time interval between the end of the last call and the beginning of the next call via one and the same gsm module (all incoming and outgoing calls are rejected during this timeout). The recommended value is 2 seconds. Do not change thi...
Page 51
51 2n telekomunikace a.S., www.2n.Cz ® wavecom module settings gsm-band selection – select the gsm frequencies for the mobile network. Echo cancelling – enable/disable echo cancelling for the module. Enable hr codec – enable the half rate codec for the gsm network. Enable amr codec – enable the adap...
Page 52
52 2n telekomunikace a.S., www.2n.Cz ® error gsm/umts causes here you can set the isdn release cause for the states mentioned below. The call that meets the below mentioned requirements will be rejected with a user-defined cause (the isdn cause number will be transformed into a sip code for voip acc...
Page 53
53 2n telekomunikace a.S., www.2n.Cz ® isdn cause value description sip code description 1 unallocated number 410 gone 3 no route to destination 404 not found 6 channel unacceptable 503 service unavailable 16 normal call clearing bye 17 user busy 486 busy here 18 no user responding 480 temporarily u...
Page 54
54 2n telekomunikace a.S., www.2n.Cz ® others text of sms at no answer – edit the text of the sms to be sent to the calling party in case of no answer (if the function is active). The %n string will insert the clip received from voip in the sms text. Text of sms for all calls – fill in this paramete...
Page 55
55 2n telekomunikace a.S., www.2n.Cz ® generate virtual ring tone – enable/disable generation of the virtual ringing tone to the voip interface. Call length counting – select whether the call should be counted in seconds or minutes. After call relax delay – set the time between the end of the curren...
Page 56
56 2n telekomunikace a.S., www.2n.Cz ® gprs activation apn string – define the access point name (apn) for gprs connectivity. Basic settings roaming enabled for network code – set the international network identifier for roaming purposes consisting of the following two codes: mcc – mobile country co...
Page 57
57 2n telekomunikace a.S., www.2n.Cz ® the parameter elapses first count . Day limit of called minutes – set the maximum count of minutes to be called via the sim card per day. Time limits define the sim card use time limits for the gsm group. – use this function to assign up to four independent fre...
Page 58
58 2n telekomunikace a.S., www.2n.Cz ® general settings mode – set how the gateway should process incoming gsm calls: reject incoming calls – all incoming gsm calls are automatically rejected. Ignore incoming calls – all incoming gsm calls are ignored. The calling subscriber gets the check ringing t...
Page 59
59 2n telekomunikace a.S., www.2n.Cz ® send clip from gsm/umts to voip transfer clip from gsm/umts – enable/disable the function. Separating char – enter the character to separate the calling sim card clip and id extension to be called. Modify – modify the id extension. Others time to keep clip in t...
Page 60
60 2n telekomunikace a.S., www.2n.Cz ® basic settings gsm network id – name the prefix list for convenience. Default count of digits – the default length of the number to be dialled into gsm/umts when routing via the selected prefix list. Use this parameter if the parameter is not included in the ta...
Page 61
61 2n telekomunikace a.S., www.2n.Cz ® prefixlist 1–16 – call routing will obey the rules set in prefix list 1–16. The count of digits to be dialled is governed by the setting. Prefixes all prefixes – all the prefix lists are permitted. Prefix lists 1–16 will be searched from 1 to 16. The first matc...
Page 62
62 2n telekomunikace a.S., www.2n.Cz ® call duration limit – set the maximum call duration (minutes). Mobility extension the table registers the mobility extension users. Name – enter the user name for calling to voip. User – enter the registration user name for voip. Password – enter the registrati...
Page 63
63 2n telekomunikace a.S., www.2n.Cz ® login configuration the window helps you set the access password and name for the 2n voiceblue ® web interface. Use the same data for telnet connection too. Next web configuration set additional parameters for the gateway web interface. Auto logout – set the co...
Page 64: Messaging
64 2n telekomunikace a.S., www.2n.Cz ® messaging this group helps: set the gsm gateway to send/receive sms via smtp/pop3 or smpp define the routing rules for incoming and outgoing sms messages check the gsm gateway sms database filling capacity modules grouping global settings sms server enabled – e...
Page 65
65 2n telekomunikace a.S., www.2n.Cz ® modules to sms groups assignment this section helps you assign gsm modules to sms groups (according to the gsm provider, e.G.) to facilitate incoming/outoging sms routing. Sms groups to user groups assignment this section helps you assign sms groups to user gro...
Page 66
66 2n telekomunikace a.S., www.2n.Cz ® add user user group – assign the user to a user group. User full name – define the system user name. Replace dial for outgoing sms – define the number (cpn) to which the user's outgoing sms messages shall be sent. Access type – select the communication protocol...
Page 67
67 2n telekomunikace a.S., www.2n.Cz ® user group this section helps you edit the user group and set the routing rules for the group's incoming and outgoing sms. General settings set the basic parameters for sms sending via smtp/pop3 or smpp. Optional informations description – set the user group de...
Page 68
68 2n telekomunikace a.S., www.2n.Cz ® smtp maximum sms per e-mail – – set the maximum count of sms messages to be sent within one email message. Any characters exceeding the set length will be ignored. Smtp add "from" to sms – – add 'from' from the email message to the outgoing sms. The sender info...
Page 69
69 2n telekomunikace a.S., www.2n.Cz ® smpp address modification source address of message incoming from smpp – set how to modify the message sender id received via smpp. Never replace original address replace if the original address is empty always replace original address address – enter sender's ...
Page 70
70 2n telekomunikace a.S., www.2n.Cz ® add record disabled – enable/disable the selected routing rule. Message from sms group – select the sms group that receives the sms. Action type – select the action for the received sms: autoclip routing – the incoming sms will be routed according to the autocl...
Page 71
71 2n telekomunikace a.S., www.2n.Cz ® add record disabled – enable/disable the selected routing rule. Message to sms group – select the sms group via which the sms will be sent. Action type – select the action for the outgoing sms: submit from user – enable sending sms from the selected user. Submi...
Page 72
72 2n telekomunikace a.S., www.2n.Cz ® incoming sms database the subsection displays current information on the incoming sms storage filling percentage and maximum count of incoming storage records. Outgoing sms database the subsection displays current information on the outgoing sms storage filling...
Page 73
73 2n telekomunikace a.S., www.2n.Cz ® autoclip routing table the window displays the current state of the autoclip table. Send sms this section includes a web interface for sms sending via the available user accounts. Sending sms depends on the outgoing routing rules set in messaging / and limits d...
Page 74
74 2n telekomunikace a.S., www.2n.Cz ® 1. A. B. 2. A. B. C. D. Smpp basic configuration – step by step this section helps you define the basic parameters for sms sending/receiving via smpp in . Read the subsection carefully before setting 2n voiceblue next ® messaging details. Shows sending/receivin...
Page 75
75 2n telekomunikace a.S., www.2n.Cz ® 2. D. 3. A. B. C. 4. A. B. C. 5. Set . Tcp type: server create the incoming sms routing rules in the messaging user group / / menu: general settings / incoming sms routing / add select the group to receive the sms via the message from sms group menu. Select the...
Page 76
76 2n telekomunikace a.S., www.2n.Cz ® 1. A. B. 2. A. B. C. 3. A. Smtp/pop3 basic configuration – step by step this section helps you define the basic parameters for sms 2n voiceblue next ® sending/receiving via smtp/pop3. Read the subsection carefully before messaging setting details. Shows sending...
Page 77
77 2n telekomunikace a.S., www.2n.Cz ® 3. A. 4. A. B. C. 5. A. B. C. 6. And domain , then the e-mail address of the user domain: email.Com with the right to access the sms server will be . The @ user@email.Com character is completed automatically and is not included in the domain: field. Create the ...
Page 78: Monitoring
78 2n telekomunikace a.S., www.2n.Cz ® monitoring this section helps you configure sending of snmp traps. Download the list of available traps, i.E. The mib table, from the gateway web interface. The main purpose of snmp monitoring is to observe your gsm gateway states continuously and send state in...
Page 79
79 2n telekomunikace a.S., www.2n.Cz ® servers – the addressee's primary ip address and transport port for first snmp server snmp traps (default port = 162). Please make sure that the parameters have been completed correctly to avoid snmp malfunction. – the addressee's secondary ip address and trans...
Page 80
80 2n telekomunikace a.S., www.2n.Cz ® list of snmp traps voip voip sip line is not registered voip sip line is registered gsm first gsm module: error first gsm module: ok first gsm module has too strong signal level first gsm module decreased under level of too strong signal level first gsm module ...
Page 81: Utils
81 2n telekomunikace a.S., www.2n.Cz ® utils this section provides extra functions of the gsm gateway. At present, the gsm gateway offers the ethernet interface tracing (network trace) and gateway communication tracing functions. These functions help detect gateway installation troubles (sip communi...
Page 82
82 2n telekomunikace a.S., www.2n.Cz ® control action type – set the test call type. Make call – the gateway will make an outgoing test call. Wait call – the gateway will await an incoming test call. Destination channel – select a channel for the outgoing call interface. The lcr settings do not affe...
Page 83: Management
83 2n telekomunikace a.S., www.2n.Cz ® management firmware update in this menu you can store new firmware into the gsm gateway. Select the files only. Refer to the firmware upgrade subsection on page vbn–xx.Xx.Xx.Bin brief for more firmware information. Installation guide after the new firmware file...
Page 84
84 2n telekomunikace a.S., www.2n.Cz ® configuration download the window helps you download the current configuration. The 2n voiceblue next ® file format is . Cfg–m202–gateway_serial_number–rrrrmmdd–hhmmss.Tar configuration upload the window helps you upload new configuration settings into co 2n vo...
Page 85: Others
85 2n telekomunikace a.S., www.2n.Cz ® others sim client this section is displayed for those gsm gateways only that support the 2n sim star ® system connection – remote sim card function. Sms this subsection helps you send and receive sms via the modules. Tip you can also use the sms user account fo...
Page 86: 4. Advanced Configuration
86 2n telekomunikace a.S., www.2n.Cz ® 4. Advanced configuration this section describes communication with using a terminal. 2n voiceblue next ® here is what you can find in this section: 4.1 terminal-based communication 4.2 at interface 4.3 logs 4.4 cdr 4.5 sdr 4.6 available status messages 4.7 sta...
Page 87: Terminal
87 2n telekomunikace a.S., www.2n.Cz ® 4.1 terminal-based communication 2n voiceblue next ® allows for communication via the tcp/ip telnet protocol. The maximum count of active telnet sessions is ten. If there are more telnet connection requests than ten, the gsm gateway rejects the connection. Term...
Page 88: 4.2 At Interface
88 2n telekomunikace a.S., www.2n.Cz ® 4.2 at interface 2n voiceblue next ® uses the list of at commands derived from the standard at set for configuration and monitoring purposes. The configuration entering commands start with at%parameter_id. The configuration writing out commands start with at&se...
Page 89
89 2n telekomunikace a.S., www.2n.Cz ® wireless engines at&q## – received gsm signal level (##=00–15) at&qall – received gsm signal level from all gsm modules at&gxx=atcmd – send command for at commands directly to the gsm module at&gxx=at+cnum – sim card telephone number at&gxx=at+cpin="xxxx" – pin...
Page 90
90 2n telekomunikace a.S., www.2n.Cz ® system settings at%s70=x.X.X.X – ip address at%s71=x.X.X.X – ip address mask at%s81= – initialisation string for setting of mode connected to the gateway com2 at%s90=x – type of assignment of b-channels to gsm modules and x 0 – rotating 1 – locked 2 – according...
Page 91
91 2n telekomunikace a.S., www.2n.Cz ® basic gsm settings at%g00=rr,gggggg,gggggg, gggggg,gggggg,gggggg – g,r = number of gsm group for each gsm module at%g01=mode,atms,atfs – voice processing settings (for gm22 gsm modules only) mode – algorithm (0-none, 1-semiduplex, 2-fullduplex)atms, atfs – tran...
Page 92
92 2n telekomunikace a.S., www.2n.Cz ® lcr table at&r – shows lcr table at%r##=net,hh:mm/hh:mm/w,gr* – settings of line ## (0..63) of lcr table net – number of network list (0..8) hh:mm/hh:mm/w* – line using time limitation gr – gsm group numbers test calls at!Sgxx=dial – initiates testing call from...
Page 93
93 2n telekomunikace a.S., www.2n.Cz ® netid – network id of active wireless network oper – name of active wireless network new – number of received and saved ms on sim card cnt – total number of sent sms messages according to statistics *smsinc: ch,ix,sts,mem – sms message has been received and sav...
Page 94: 4.3 Logs
94 2n telekomunikace a.S., www.2n.Cz ® 4.3 logs for the current log records see the section gateway gateway control – log file / or use the at&l at command for telnet sessions. The following list of log statuses is universal and some logs may not be included in : 2n voiceblue next ® type text descri...
Page 95
95 2n telekomunikace a.S., www.2n.Cz ® system reset cmd reset the system by at&bsys command l1–err (reserved) l2–err error of isdn layer 2 by q.921 a: unsol.Rx(f) received packet rr,rnr,rej with unexpected bit f=1 b: unsol.Dm(f) received packet dm with unexpected bit f=1 c: unsol.Ua(f) received pack...
Page 96: 4.4 Cdr
96 2n telekomunikace a.S., www.2n.Cz ® 4.4 cdr for the current cdrs see the section or use gateway / gateway control cdr file / the at&c / at&cr at commands for telnet sessions. **date time type cause from/to groups conn. Durat. Aoc-info gid cdn cgn imsi/scid column 1: ** column 2: call date and tim...
Page 97: 4.5 Sdr
97 2n telekomunikace a.S., www.2n.Cz ® 4.5 sdr refer to the file section for the current gateway / gateway control / sdr sdrs section or use the at&cs / at&csr at commands for telnet sessions. ** date time type error usr/gr/mo ssec date time pn/pt gid 1 column : ** : column 2 date/time – sdr record ...
Page 98: Gsm Layer Statuses
98 2n telekomunikace a.S., www.2n.Cz ® 4.6 available status messages the following list of statuses is universal and some messages may not be included in . 2n voiceblue next ® gsm layer statuses gsm layer 2 init – gsm module initialisation start (follow pinreq) sim0 – module switch to internal sim c...
Page 99: Link Layer Statuses
99 2n telekomunikace a.S., www.2n.Cz ® link layer statuses layer 4 null – rest status, ready for call more – call request received from gsm or isdn, awaiting further dialling or timeout setup – call request sent to opposite interface proc – call request confirmed, awaiting call answer active – conne...
Page 100: Records of Events and Calls
100 2n telekomunikace a.S., www.2n.Cz ® records of events and calls record type in log file power – system power on, power off or reset init – initialisation of eeprom (configuration) or flash (upgrade) hw-err – hw error of plugged-in board syserr – system error (memory error, etc.) brdin – board pl...
Page 101: 4.7 Statistics
101 2n telekomunikace a.S., www.2n.Cz ® 4.7 statistics the gsm gateway automatically generates statistic data on all outgoing and incoming calls. These data can be deleted on the user level or though configuration (automatic deletion on a selected day). Explanation of columns group/network/module – ...
Page 102
102 2n telekomunikace a.S., www.2n.Cz ® ----------------------------------------------------------------------------------------------- #g1 out ( 2.01) 0 0:00:00 0 0 0 0 0 #g2 out ( 2.01) 0 0:00:00 0 0 0 0 0 #g3 out ( 2.01) 0 0:00:00 0 0 0 0 0 #g4 out ( 2.01) 0 0:00:00 0 0 0 0 0 statistics of incomi...
Page 103
103 2n telekomunikace a.S., www.2n.Cz ® #vi out ( 0.00) 0 0:00:00 0 0 0 0 0 #grpout ( 0.00) 0 0:00:00 0 0 0 0 0 group (reset) minutes hhhh:mm:ss calls reject failed red.In redout ------------------------------------------------------------------------------ ----------------- #g1 out ( 2.01) 0 0:00:0...
Page 104
104 2n telekomunikace a.S., www.2n.Cz ® ------------------------------------------------------------------------------ ----------------- #m0 day (12.03) 0 0:00:00 0 0 #m0 rem (12.03) 0 0:00:00 0 0 module (reset) min0:ss limit min1:ss limit min2:ss limit min3:ss limit --------------------------------...
Page 105: 4.8 Tracing
105 2n telekomunikace a.S., www.2n.Cz ® 4.8 tracing 2n voiceblue next ® allows for operation tracing (voip, sip, gsm). Tracing is accessible in one session only at a time, the other tracing requests are rejected with busy. With regard to a rather extensive volume of data, we recommend that the funct...
Page 106: 4.9 External Sms Control
106 2n telekomunikace a.S., www.2n.Cz ® 4.9 external sms control if this function is enabled for the active telnet session, the gsm gateway automatically sends information on an incoming sms message. An sms message can also be sent using special commands. At – 'basic keep alive' command (answer 'ok'...
Page 107: 5. Technical Parameters
107 2n telekomunikace a.S., www.2n.Cz ® 5. Technical parameters two-channel version dimensions dimensions (w x h x d): 170x130x45 mm power supply type: external power adapter (self type) 90–230v,50–60hz to 12v dc 2a power over ethernet (poe 802.3af) connector: dc jack 2.1mm power input: up to 20w in...
Page 108: Wireless Interface
108 2n telekomunikace a.S., www.2n.Cz ® wireless interface count of channels: 2 bandwidth: gsm 850/900/1800/1900 mhz umts 800/850/900mhz/2100 mhz gsm: cinterion mc55i-w, or wavecom q55, or telit (according to the gsm ) umts module type used audio: hr/fr/efr/amr usim/sim card: small plug-in 3v antenn...
Page 109: Wireless Interface
109 2n telekomunikace a.S., www.2n.Cz ® wireless interface count of channels: 4 bandwidth: gsm 850/900/1800/1900 mhz umts 800/850/900mhz/2100 mhz gsm: cinterion mc55i-w, or wavecom q55, or telit (according to the gsm ) umts module type used audio: hr/fr/efr/amr usim/sim card: small plug-in 3v antenn...
Page 110: 6. Supplementary Information
110 2n telekomunikace a.S., www.2n.Cz ® 6. Supplementary information this section provides supplementary information on . 2n voiceblue next ® here is what you can find in this section: 6.1 troubleshooting 6.2 list of abbreviations 6.3 regulations and directives 6.4 general instructions and cautions.
Page 111: 6.1 Troubleshooting
111 2n telekomunikace a.S., www.2n.Cz ® 6.1 troubleshooting for the most frequently asked questions refer to . Faq.2n.Cz no led is shining on . 2n voiceblue next ® 2n voiceblue next ® is disconnected from the power supply. Fails to log in to the gsm network. 2n voiceblue next ® check the sim card. C...
Page 112: 6.2 List of Abbreviations
112 2n telekomunikace a.S., www.2n.Cz ® 6.2 list of abbreviations following abbreviations are used within manual: api (application programming interface) asr (answer seizure ratio) bios (basic input–output system) cd (compact disc) cdr (call data record) clir (calling line identification restriction...
Page 113: Europe
113 2n telekomunikace a.S., www.2n.Cz ® 6.3 regulations and directives europe 2n voiceblue next ® conforms to the following directives and regulations: directive 1999/5/ec of the european parliament and of the council, of 9 march 1999 – on radio equipment and telecommunications terminal equipment an...
Page 114: Fcc
114 2n telekomunikace a.S., www.2n.Cz ® fcc note: this equipment has been tested and found to comply with the limits for a class a digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is opera...
Page 115
115 2n telekomunikace a.S., www.2n.Cz ® 6.4 general instructions and cautions please read this user manual carefully before using the product. Follow all instructions and recommendations included herein. Any use of the product that is in contradiction with the instructions provided herein may result...
Page 116
116 2n telekomunikace a.S., www.2n.Cz ® electric waste and used battery pack handling do not place used electric devices and battery packs into municipal waste containers. An undue disposal thereof might impair the environment! Deliver your expired electric appliances and battery packs removed from ...
Page 117
117 2n telekomunikace a.S., www.2n.Cz ® 2n telekomunikace a.S. Modřanská 621, 143 01 prague 4, czech republic phone: +420 261 301 500, fax: +420 261 301 599 e-mail: sales@2n.Cz web: www.2n.Cz pr1561v3.11.