2SAN ADR-7008 Quick Installation Manual

Manual is about: Digital Video Recorder

Summary of ADR-7008

  • Page 1

    Digital video recorder adr-7008 quick installation guide version 1.0 copyright © 2007 2san inc. Release: september 2007.

  • Page 2

    Copyright and trademark the information of the product in this quick guide is subject to change without prior notice and does not represent a commitment on the part of vendor, who assumes no liability or responsibility for any errors that may appear in this quick guide. 2san is the trademark of 2san...

  • Page 3

    Weee statement english in order to cope with the increasing waste electrical and electronic equipment, reduce the use of landfill and incinerator, and prevent the harmful matter of waste equipment from entering the environment, the european union (eu) has set the directive on waste electrical and el...

  • Page 4

    Weee бюлетень russian Чтобы справиться с увеличивающимся ненужным электрическим и электронным оборудованием, уменьшите использование закапывания мусора и использования установки для сжигания отходов, препятствуйте вредному выбросам загрязнять окружающую среду, Европейский союз (ЕС)установил Директив...

  • Page 5

    Table of contents 1. Introduction....................................................................................................................... 6 1.1 p roduct o verview ..........................................................................................................6 1.2 s pecifica...

  • Page 6

    6 1. Introduction 1.1 product overview digital technology for dvr (digital video recorder) represents the better recording quality, control and functionality as well as remote viewing. Unlike pc-based dvr, 2san’s embedded dvr enjoys much more benefits that contain no software at all on the hard driv...

  • Page 7

    7 to the network rs-485 z for ptz control (supports pelco-d, pelco-p & eyeview protocols) others temperature for operation 0°c ~ 40°c power supply 100-240v ac; 50-60 hz; 220w dimension (mm) 430 (w) x 85 (h) x 401 (d).

  • Page 8

    8 2. Quick installation 2.1 package contents „ digital video recorder „ quick installation guide „ power supply cord „ rs-485 connector „ mount bracket 2.2 how to install „ step 1. Connect cameras connect cameras to the video bnc inputs marked video in 1~8. Use the bottom row of video bnc outputs fo...

  • Page 9

    9 2.3 panel functions „ front panel tray lock led indicator function power shows power on/off status rec shows the recording status live shows the live view play shows playback in operation alarm lights when event occurs full lights when the hdd is full ptz lights when you control a ptz camera hdd s...

  • Page 10

    10 4 pause press to freeze the screen. 5 ff `` press to forward playback of selected video recording. Repeat press it will change the forward-rate among 2x 4x 8x and 16x. 6 play/stop `/ press to operate in toggle for play/stop while playback. 7 jog press to playback in slow motion. 8 lock lock press...

  • Page 11

    11 „ rear panel no. Name function 1 video in connect to the cameras. Loop loop the video signal. 2 main mon connect to the monitor. Call mon quad composite video output 3 audio in / out input / output audio signals. 4 rs-485 used to communicate with ptz cameras. 5 rs-232 reserved 6 network two sets ...

  • Page 12

    12 3. The first time to use 3.1 internal hdd installation 1. Loosen these three screws on the rear panel. 2. Remove the cover. (push the cover back before lifting it ) 3. Loosen these four screws on the hdd bracket and take the bracket out..

  • Page 13

    13 4. Mount and tighten the hdd to the bracket. 5. Put the bracket back to the case and tighten it. 6. Connect the sata and power cables. Disk a(sata0) disk b(sata1).

  • Page 14

    14 3.2 hot-swap hdd installation 1. Unlock the hot-swap tray and then pull it out. 2. Put a hdd into the tray and fix the hdd with screws. 3. Push the tray back to the case and lock it..

  • Page 15

    15 3.3 how to record first, set the system time to local time. Press the menu button, select system and then time. The items should be set as follows: „ date display: yy/mm/dd, mm/dd/yy, dd/mm/yy. „ time format: 12 hours / 24 hours. „ system date setting: modify the system date. „ system time settin...

  • Page 16

    16 „ step 2. Select “disk utility” item. „ step 3. Select “disk format” item. „ step 4. Move the yellow cursor by using the up / down arrow keys (©,ª) and select hard drives by using the right arrow key (¨). Then press “begin format” button to format. When formatting completed, a message will show u...

  • Page 17

    17 3.4 how to playback press the search key to play back. There will be appearing a menu of date range as year / month / day / hour / minute / second. Use up and down arrow keys to select the range, and use left and right arrow keys to change the set value. Besides, you can quickly search the histor...

  • Page 18

    18 use § , ¨ to change the characters (0~9 or a~z or both), and use ©,ª to move the characters. A password can be composed of 10 characters at most. When modifying, you have to key in the original password first, and press the enter key to confirm. Then, key in a new password and press the enter key...

  • Page 19

    19 3.6 firmware update download the latest firmware from 2san web site http://www.2san.Com . This file will be in the rar format. Extract it to the usb flash drive. (empty your flash drive first) „ step 1. Power on the dvr. „ step 2. After booting and the lcd shows “ready", insert the usb flash driv...

  • Page 20

    20 technical support form email: support@2san.Com http://www.2san.Com model adr-7008 f/w version system configuration motherboard bios version scsi adapter chipset memory display card other i/o cards os version hard drive configuration hard drive model capacity firmware version others problem descri...