2Wire PC Port Installation Manual

PCPORT20.exe version 2/2003

2Wire PC Port Driver Installation for 

Windows Computers

These instructions describe the procedure to install the Windows USB driver for the 2Wire PC Port 

Phoneline 10 Mbps USB Adapter, and are intended only for those customers who did not receive a CD-ROM 

with their PC Port. If you have other issues, please refer to the troubleshooting section of the PC Port 

installation guide.

1.

Download the PC Port driver.

2.

Open the self-extracting archive.

3.

Enter the name of a folder to which to extract the files (for example, C:\PCP). Click 

Unzip

.

4.

Power on your computer. Windows recognizes the PC Port and automatically launches the Add New 

Hardware Wizard.

5.

Select 

Search for the best driver for your device

.

6.

Click 

Next

.

7.

Select 

Specify a location

 and specify the folder to which the files were extracted.

8.

Click 

Next

.

9.

Windows is now ready to load the network driver. Click 

Next

. The driver loads.

10.

Click 

Finish

. Windows may take several minutes to complete the driver installation. When the System 

Settings Change window opens, click 

Yes

 to restart the computer. If the System Settings Change 

window does not open, restart your computer by clicking 

Start > Shut Down > Restart > OK

.

Note: 

If asked to insert your Windows CD, please do so and follow the on-screen instructions. If 

you cannot locate your Windows CD, look for the driver in the following locations: 

C:\WINDOWS\options\cabs

C:\Windows

C:\Windows\system

D:\Win98