3B LASER PEN 200 Operating Instructions Manual

Manual is about: Laser Pointer for Laser and Light Therapy

Summary of LASER PEN 200

  • Page 1

    3b laser pen 500 operating instructions last revised september 26th, 2017.

  • Page 2: Scope Of Delivery

    Function keys and display elements ...................................................................................................................................................... 5 display and led displays...........................................................................................

  • Page 3: Precautionary Instructions

    Dear user, we are glad that you have selected an ultra-modern, quality medical product in the 3b laser pen, and would like to thank you for placing your trust in us. In order to achieve the success you are looking for and to ensure that you have many years of use from your 3b laser pen, we would ask...

  • Page 4

    Warning • be sure to read all instructions for operation before treating a patient. Observe the regulations for handling the 3b laser pen. • do not drop the unit, accessories on hard surfaces. Do not submerge the unit, accessories in water. All of these conditions will damage the unit. Damage result...

  • Page 5

    Function keys and display elements 11 7 last revised 2017-09-26 12 6 1 3 2 4 5 8/9/10 13 5 1 laser the laser is activated/deactivated with this key. 2 + / - the values selected with the set key can be changed with these keys. 3 set the values can be selected and stored with this key. 4 power the 3b ...

  • Page 6: Display And Led Displays

    Display and led displays this screen appears during the booting process after the laser unit has been tur- ned on. The first line shows the specific model, and the second line the software status of the unit. This screen appears after the laser unit has been turned on once the booting process is fin...

  • Page 7: Operation

    This screen appears when the batteries are empty and must be charged. In this condition it is not possible to activate the laser pen. The charging process is indicated with this screen. When this appears, insert key pin into red connector. Warning: laser power error. This message appears when the la...

  • Page 8: 60.0J

    You can turn around the display (right-handed/left-handed users) with the “+” key (2). The sound (which is issued every 20 s during laser discharge) can be turned on and off with the “-” key (2). When the loudspeaker icon is crossed out, the sound is turned off. By pressing the “set” key you can the...

  • Page 9: Programmable

    For therapy programs and frequencies, see appendix 1 (page 20) a single frequency can be selected as follows: when the value on the display flashes, go to the respective frequency program by pressing the “+” or “-”key. Then press the set key for 2–3 sec. This gets you into the setting mode for the s...

  • Page 10: Using The Laser

    Possible settings for the therapy time are: 10 sec.–1 min. In 20-sec. Increments 1 min.–10 min. In 1-min. Increments possible settings for the dose are depending on the specific model and are : 3b laser 500 / 1 j–60 j max. Once all laser parameters have been set, this is shown in the display. The di...

  • Page 11

    Treatment ends automatically after the selected therapy time has elapsed or when the selected energy dose has been achieved. The end of the therapy is indicated by short triple sound signal. Treatment can be terminated manually at any time by pressing the laser key (1). Once the therapy has ended, t...

  • Page 12

    Searching for acupuncture points acupuncture points exhibit a different electronic response compared to the immediately adjacent areas of skin which appear visibly identical. These points can be detected as zones with an increased skin conductivity (equivalent to a reduced electric resistance of ski...

  • Page 13: Application

    Measurement (a3) value e.G. 90 measurement (a2) value e.G. 80 measurement (a1) value e.G. 60 this method allows you to locate the acupuncture point relatively accurately. To search for another point, first remove the 3b laser pen from the skin. The laser switches to the automatic status again, the m...

  • Page 14: Use

    • move the 3b laser pen over the skin slowly and uniformly, and only activate it when it is in treatment position. • only apply creams or lotions after the laser treatment has been finished. Clean the laser beam outlet using 70 % ethanol following each contact with skin and for each new patient. Use...

  • Page 15: Maintenance And Care

    Maintenance and care to ensure safe and hygienic operation, please observe the following: • the laser beam outlet must be cleaned with a cotton swab using 70 % ethanol (medical alcohol) every time it has come in contact with skin or for each new patient. • do not expose the unit to direct sunlight. ...

  • Page 16: Safety Information

    Important: the 3b laser pen may not be stored with empty rechargeable batteries. We recommend removing the rechargeable batteries if you are not intending to operate the unit for a period of >1 month. Rechar- geable batteries that have been removed must be charged at least every three months. The ba...

  • Page 17

    The manufacturer is only responsible for safety and reliability if the laser device is used in accordance operating instructions. Operate the 3b laser pen only in closed rooms at room temperature. The laser warning sign which has been supplied must be attached to the door. Manufacturer’s labels and ...

  • Page 18: Accessories

    Labels accessories • protective glasses – therapist • softcap protective glasses – patient • rechargeable aa-size nimh batteries min. 2.400 mah • spare wave guide • 2 pc. Spare rechargeable batteries 18 last revised 2017-09-26 observe the operating instructions observe the disposal regulations livet...

  • Page 19

    Technical data for 3b laser pen general product name 3b laser pen device type low level laser therapy device proper use low-energy laser system for the treatment of pain, trigger and acupuncture points as well as small skin areas classification and standards classification protection class ii accord...

  • Page 20

    Appendix 1: therapy frequencies / therapy programs 20 last revised 2017-09-26 program frequency cw continuous wave multi-frequency: 200hz bis 3,5 khz alpha-frequency: 10 hz nogier a: 2,28 hz nogier b: 4,56 hz nogier c: 9,12 hz nogier d: 18,25 hz nogier e: 36,5 hz nogier f: 73,0 hz nogier g: 146,0 hz...

  • Page 21

    Laser system 3b laser notes on electromagnetic compatibility medical electronic devices are subject o special precautions regarding their emc and must be installed and operated in accordance with the emc instructions in the accompanying documents. In particular, medical electronic equipment may be i...

  • Page 22

    Guidance and manufacturer’s declaration - electromagnetic immunity the 3b laser is intended for use in the electromagnetic environment specified below. The customer or the user of the 3b laser should assure that it is used in such an environment. Immunity test iec 60601 test level compliance level e...

  • Page 23

    The „3b laser“ is intended for use in the electromagnetic environment specified below. The customer or the user of the “3b laser” should assure that it is used in such an environment. Immunity test iec 60601 test level compliance level electromagnetic environment- guidance conducted rf iec 61000-4-6...

  • Page 24

    Recommended separation distances between portable and mobile rf communications equipment and the 3b laser. The 3b laser is intended for use in an electromagnetic environment in which radiated rf disturbances are controlled. The customer or the user of the 3b laser can help prevent electromagnetic in...

  • Page 25

    American 3b scientific 2189 flintstone dr, suite o tucker, ga 30084 usa tel: +1.678.405.5807 cell: +1.770.310.5886 fax: +1.678.405.5728.