4iiii Sportiiiis User Manual

Download the Sportiiiis User Guide & Software

The Sportiiiis User Guide and Configuration Utility software are available for download at:

http://www.4iiii.com/support.html

The Sportiiiis User Guide has 

instructions on the use of the 

Sportiiiis unit and Configuration 

Utility.

Mounting Sportiiiis on Your Glasses

1. Insert tie wraps into mounting bracket loosely, 

as shown below:

2. Slide the Sportiiiis unit into the mounting bracket.

3. Align the Sportiiiis unit on the glasses as you’d 

like it to be mounted.  At this point, choose 

whether you’d like the boom on the inside or the 

outside of the lens (extra tie wraps are included 

so that you can change your mind later).

Boom Inside Lens

Boom Outside Lens

5. Slide the Sportiiiis unit off of the mounting 

bracket and cinch down the tie wraps as much 

as possible.

4. Carefully tighten the tie wraps to fix the 

mounting bracket in place.

6. Cut as much of the excess tails from the tie 

wraps as you can.

7. Slide your Sportiiiis unit back onto the mount, 

bend the boom into its final position, and go out 

and enjoy your Sportiiiis unit!

Charging Sportiiiis

To charge your Sportiiiis unit, uncover the micro-USB port on the bottom of the unit and plug in the 

included USB 2.0 Charge/Sync Cable.  Plug the other end of the cable into one of your computer’s 

USB ports a USB power adapter.

When your Sportiiiis unit is connected to your computer and you are running the Sportiiiis Software 

Application, the battery icon on the bottom left of the interface will indicate the charge status and 

percentage of battery power currently available in your Sportiiiis unit.

Sportiiiis Quickstart-11-04.indd   1

11/7/11   7:26 PM