ABC Office Premium 112 Owner's Manual

Download

Bookmark us

12112.90.1830 - 7/00

Premium Cutter

Models 112, 115, 118, 124

Thank you for selecting Dahle to be your Paper Cutter company. We trust you will be thoroughly satisfied

with your purchase. Dahle cutters are highly regarded world-wide for their precision, reliability, and

durability. In addition, all Dahle cutters are individually tested and must meet the most stringent

performance standards.

During use, please observe the following suggestions for care, maintenance and proper operations:

• Your cutter is equipped with a scale printed in inches and centimeters (#1). In addition, the cutting board

is printed with ½“ grid lines (#2), which acts as an excellent visual aid in achieving a straight T-square

cut.

• Insert the material to be cut under the clamp/safety guard (#3).

• Align material at desired position on inch/cm scale (#1). Material should be flush with paperstop (#4),

and parallel to the printed grid lines (#2).

• Depress the material to be cut with the clamp. The clamp will secure the material in position, preventing

slippage. While clamping the material, lower the blade, pressing the blade gently toward the cutting

board, thereby ensuring that a consistent, smooth cut is attained even with the thinnest types of paper.

MAINTENANCE

Blade - The blade should never descend by itself. If it moves too easily, it can be adjusted with the bolt

assembly located at the fulcrum (#9). In order to do so, remove the screw (#5) first and take off the lid (#6).

Then tighten the hex nut (#7) and the screw (#8) in a counter-action, thus adjusting the pressure of the upper

blade against the lower one. At last put the lid back on and secure with the screw.

Cutting Board Surface - The cutting board should be cleaned periodically, or as often as required, in order

to retain it’s original lustre. A mild general household cleaner is recommended.

LUBRICATION

The blades of your Dahle cutter were lubricated at the factory and do not require any additional treatment.

Do Not lubricate the cutting blades.

CAUTION

• Keep fingers clear of cutting blades.

• Do not lubricate the cutting blades.

• Keep out of reach of children.

• Keep handle in down position when not in use and when moving or transporting.

abcoffice

www.abcoffice.com (800) 658-8788

abcoffice