Abocom WR104 Specification Sheet
WR104
Wireless Router with
4-port Fast EtherSwitch
INTRODUCTION
The
Wireless Router with 4-port Fast EtherSwitch
is a broadband
IEEE 802.11b compliant wireless router with a built in four-port fast Ethernet switch.
It offers the easiest way to share and extend your high-speed DSL/cable modem
Internet connection, either with or without wires. This high-performance
IEEE 802.11b standards-based router connects all of your PC's equipped with
wireless PC cards, while an integrated 4-port fast Ethernet switch connects your
devices that need Ethernet wiring.
The
Wireless Router with 4-port Fast EtherSwitch
provides not only the ease
of Internet access, but also the privacy of data transmission. Network Address
Translation (NAT) and VPN pass-through provide your network with protection
from hackers, while 64 and 128-bit WEP encryption guard your wireless network
for maximum privacy. All incoming data packets are monitored and filtered.
It can also be configured to block internal users from accessing to the Internet.
FEATURE
*
Fully compatible with IEEE 802.11b standard and supports a high
data rate up to 11 Mbps
Interoperable with IEEE 802.11b (DSSS) 2.4GHz-Compliant
equipment
Capable of 64/128-bit WEP encryption
Adjustable antennas provide for better access angle
MAC address filtering, IP filtering, DHCP client/server
*
*
*
*
Standards
Frequency
Channels
Data Rate (wireless)
Security Encryption
Antenna
Ports
Buttons
LED indicators
Protocols Supported
Management
Input power specifications
Power Consumption
Physical Dimension
Weight
Agency and Regulatory
Operating Temperature
Operating Humidity
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
ANSI/IEEE 802.3 N-way Auto-Negotiation
IEEE 802.11b Wireless LAN
2.412 GHz to 2.4835 GHz Direct Sequence Spread Spectrum (DSSS)
11 Channels (US, Canada)
13 Channels (Europe)
14 Channels (Japan)
1, 2, 5.5, and 11Mbps
64-bit, 128-bit WEP encryption
Two fixed type antennas
WAN: One 10/100Mbps RJ-45 port for Cable/DSL Modem
LAN: Four 10/100Mbps switched ports
Two MDI/MDIX buttons; one is for WAN connection,
th
the other is for the 4 local port uplinkOne Factory Reset button
Power / Error Green / Orange
Internet (100/10Mbps) Green / Yellow (flashing for activity)
Local (100/10Mbps) Green / Yellow (flashing for activity)
Wireless LAN Green (flashing for activity)
TCP/IP, NAT, ARP, ICMP, DHCP client/server, PPPoE, PPP, PAP, CHAP, NTP,HTTP, TFTP, POP3, RIP1/RIP2
Web-Based configuration and management
DC 5V, 1.5A
5W
3
161 x 113 x 21mm (Width x Depth x Height)
550g
FCC part 15 Class B, CE mark
0 C to 50 C
0-90% non-condensing
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
*
Compatible with all major operating systems
1 port 10/100 Mbps N-Way Fast Ethernet for WAN (Internet connection)
4 ports 10/100Mbps N-Way Fast Ethernet Switch for LAN
Supports VPN (PPTP, L2TP, IP-Sec pass thru)
Supports PPPoE
Auto-reconnect for PPPoE
Supports Static DNS/IP
Supports Internet applications such as Web, ICQ, FTP, Telnet, E-Mail,
News, NetMeeting, Net2Phone, PCAnyWhere, mIRC, CuSeeMe,
AoE etc.
Natural firewall keeps hackers out
Support DoS (Denial of Service) hacker pattern detection and Event Log.
DHCP Server allocates up to 253 client IP addresses.
DHCP Client Table (Keep lock IP + MAC address)
DHCP Client to get global IP address automatically.
Virtual server.
Policy based Packet Filters/Access Control and Time Schedule Control.
Web UI Local/Remote Configuration and Management.
Flash memory for firmware upgrade.
Virtual DMZ Host.
Blocks WAN request and Remote "Ping" request
System Configuration can be save or load
Support Network time (SNTP) and System Log
Specification