Acapella Violon 2001 Instruction Manual

Manual is about: built-in Class-A amplifier and is valve oscillator

Summary of Violon 2001

  • Page 1

    Instruction manual.

  • Page 2: The Idea

    The idea music is an essential element of our emotional quality of life. Playing musical instruments, you can experience music authentically and immediately. On the other hand, when you are reproducing music, it is often „administered“ by various electronic devices. Administration does not suit to e...

  • Page 3: Unpacking

    Unpacking for transportation the violon 2001 has been wrapped in stretch foil which provides an excellent protection. Remove this foil by cutting it carefully with a blade or a pair of scissors on the rear side of the loud- speakers at the height of the ion tweeter. Undo the foil right to the bottom...

  • Page 4: Power Connection

    Power connection before connecting the loudspeaker for the first time, please check all components in your system for correct polarity of the ac mains. Correct phase is marked on the acapella ion tweeter. Please keep an eye on the red-marked side of the ac-connector. Ac mains phase should be there. ...

  • Page 5: Placement

    Placement because of his built-in class-a amplifier and is valve oscillator, the ion tweeter requires sufficient ventilation. When used together with the violon 2001, minimum clearances have constructionally been taken into consideration. Should you have purchased the ion tweeter for use with other ...

  • Page 6: Control Panel

    Control panel 1. Level control 2. Input rca jack 3. Mode switch (manual/automatic) 4. Fuse f1 0,4a slo-blo 5. Fuse f2 1,2a slo-blo 6. Fuse f3 0,1a slo-blo 7. Ac connector with phase identification 8. Hand marked serial number getting started bring the mode switch on the rear panel of the unit to the...

  • Page 7: Placement of The Violon 2001

    Placement of the violon 2001 the loudspeakers should be placed to each other considering a space of 2,5 metres or more. Depending on the peculiarities of your listening room, we recommend a symmetrical placement. That means that the distances to the sidewalls and to the listening area should be the ...

  • Page 8: Optimising Imaging Accuracy

    Optimising imaging accuracy control of monophonic reproduction the meaning of this control is to optimise placement of the loudspeakers relative to your living room. Without proper adjustment you won’t be able to localise voices or instruments precisely in the imaginary room which is reproduced by t...

  • Page 9: Care of The Loudspeakers

    Care of the loudspeakers note: please clean the varnish or acryl surface with a clean and humid chamois only. When cleaning the mid-range horn unit, be careful with the very before cleaning sensitive membrane of the driver. You can polish the ion tweeter with an the ion tweeter, appropriate cloth un...

  • Page 10: Appendix

    Appendix troubleshooting malfunction during operation cannot always be attributed to a damage within the device. The following table may help you to find out the reason of a malfunction and to remove it. If none of these suggestions solves the problem, contact your acapella dealer or us. Discovered ...