Åkerströms RX DIN USA Operating Manual

Summary of RX DIN USA

  • Page 1

    946415-000-a0 operating manual sesam 800 k3, rx din usa.

  • Page 2: Table of Contents

    Table of contents 1 introduction ______________________________________ 3 2 scope ___________________________________________ 3 2.1 safety considerations _____________________________________4 2.2 warnings _______________________________________________6 3 technicalspecifications ___________________...

  • Page 3: Introduction

    Introduction 3 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 1 introduction this manual only covers the installation of the sesam radio remote door opening system. The sesam system is not a complete door opening system: it provides only the set of outputs that are...

  • Page 4: 2.1

    Scope 4 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 2.1 safety considerations 1. The safety guidelines in this manual are not intended to replace any rules or regulations or any applicable local, state, or federal governing laws. The following information is int...

  • Page 5: Warning:

    Scope 5 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 7. Radio controlled operators should always position themselves for the best view of the equipment they are controlling. The equipment should never be operated blindly. The operator should always remain at a sa...

  • Page 6: 2.2

    Scope 6 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 2.2 warnings 1. Read this manual carefully before operating and installing this product. 2. Due to the complex nature of equipment, it is necessary to read the entire manual before installation. 3. Only authori...

  • Page 7: Technicalspecifications

    Technical specifications 7 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 3 technicalspecifications table1. Technicalspecifications,sesam800k3&rxdin systemspecifications operating frequency: 926.5 mhz channel separation: 25 khz power output: functional sensitivity:...

  • Page 8: Description of The System

    Description of the system 8 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 4 description of the system 4.1 receiver this document covers receiver model sesam 800 rx din • 3 single pole double throw relays. • memory capacity: up to 100 transmitters. • designed for d...

  • Page 9: Installation of The Receiver

    Installation of the receiver 9 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 6 installation of the receiver the permanent installation of the receiver must include fuses that protect the equipment and wiring from overcurrent and short-circuit. In detail the power ...

  • Page 10: 6.2

    Installation of the receiver 10 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 6.2 antenna connector the antenna connector on the receiver may not be used and are therefor blocked. 6.3 connections on the receiver the receiver is equipped with connections for relays...

  • Page 11: Indicators On The Receiver

    Indicators on the receiver 11 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 7 indicators on the receiver the sesam 800 rx din model has three led indicators that is displaying system information (see fig. 1 for positions of the leds). The indications on the leds a...

  • Page 12: 8.2

    Configuration of the receiver 12 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 8.2 advancedconfiguration this configuration allows the user to determine which button activates a specific relay. 1. Open the lid on the receiver, see basic configuration. 2. Press the...

  • Page 13: 9.1

    Description of sesam 800 k3 transmitter 13 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 9 description of sesam 800 k3 transmitter figure4. Thesesam800k3transmitterindicatorsandbuttons 1.Statusled 2.Buttons1..3 9.1 indications on the transmitter normal operation q...

  • Page 14

    Replacing batteries in the transmitter 14 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 10 replacingbatteriesinthetransmitter 10.1 replacingbatteriesinsesamk3 if the indication led on the transmitter indicates low battery, replace the batter- ies promptly. Before ...

  • Page 15

    Error codes, sesam 800 rx din 15 (16) sesam 800 k3 rxdin usa manual document-id: 946415-000 version: a0 author: sh 11 error codes, sesam 800 rx din any of the below error states is displayed with ten quick flashes on the status led (led 6) regardless of fault. Id already programmed memory full memor...

  • Page 16

    Åkerströms björbo ab box 7, se-785 21 gagnef, sweden street björbovägen 143 se-785 45 björbo, sweden phone +46 241 250 00 fax +46 241 232 99 e-mail sales@akerstroms.Com www.Akerstroms.Com © Åkerströms björbo ab, 2012.