Akerstroms SESAM 800 K3 Operating Manual

Other manuals for SESAM 800 K3: Operating Manual

Summary of SESAM 800 K3

  • Page 1

    941211-000 -d1 operating manual sesam 800 l15, m6, s6, s3, k3, rxd, rx, rx din.

  • Page 2: Table of Contents

    2 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh table of contents 1 introduction _________________________________________ 4 2 scope _____________________________________________ 4 3 technicalspecifications _______________________________ 5 4 description of the syste...

  • Page 3

    3 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.3 sesam 800 rx din _______________________________________23 8.3.1 basicconfiguration ______________________________________________ 23 8.3.2 advancedconfiguration ___________________________________________ 23 8.3.3 ...

  • Page 4: Introduction

    Introduction 4 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 1 introduction this manual only covers the installation of the sesam radio remote door opening system. The sesam system is not a complete door opening system: it provides only the set of outputs that are dr...

  • Page 5: Technicalspecifications

    Technical specifications 5 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 3 technicalspecifications tabell 1. Technicalspecifications,sesam800 systemspecifications operating frequency: 869,8 mhz channel separation: 25 khz power output: functional sensitivity: transmis...

  • Page 6

    Technical specifications 6 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh specificationsk3 ip- class: ip65 dimensions: 67x44x13 mm weight: 30g battery type: 2* cr 2025 lithium cells screw size ph00 specificationss3 ip- class: ip67 dimensions: 75 x 46 x 22 mm weight: 8...

  • Page 7: Description of The System

    Description of the system 7 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 4 description of the system 4.1 receivers this document covers three receiver models. Rx, rxd and rx din. Rx and rxd can be ordered as 230 v ac or 12-24 v ac/dc. Rx din only as 12-24 v ac/dc. S...

  • Page 8: 4.2

    Description of the system 8 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 4.2 transmitters this document covers five transmitter models: keyring k3: • miniature 3 button transmitter. • suitable for controlling 3 non-response time critical func tions. Small s3: • smal...

  • Page 9: Description of The Receivers

    Description of the receivers 9 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 5 description of the receivers 1 2 3 4 5 6 7 8 9 r1 r2 r3 4 5 6 7 1 2 3 8 9 14 10 11 12 13 figure1.Sesam 800 rx 230 v ac model indicators, connections andjumper. 1.Led1relay1status 2.Led2rel...

  • Page 10

    Description of the receivers 10 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 1 2 3 4 5 figure3. Sesam 800 rxd 12-24 v dc/ac model connections 1.Powerconnection 2.Connectiontorelay1 3.Connectiontorelay2 4.Connectiontorelay3 5. Antenna connector 1 2 3 4 5 figure4. Ses...

  • Page 11

    Description of the receivers 11 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 1 2 3 4 5 figure5. Sesam800rxdmodeldisplay andbuttons 1.Learn/erasebutton 2.Enterbutton 3.Memorypositionupbutton 4.Memorypositiondownbutton 5.Display figure6. Sesam 800 rx din model connect...

  • Page 12: Installation of The Receiver

    Installation of the receiver 12 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 6 installation of the receiver the permanent installation of the receiver must include fuses that protect the equipment and wiring from over current and short-circuit. In detail the power s...

  • Page 13: 6.2

    Installation of the receiver 13 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 6.2 antenna placement attach the supplied antenna to the antenna connector on the receiver. Note that the antenna must not be placed near metal objects such as wiring, tinroof, etc. If an a...

  • Page 14: Indicators On The Receivers

    Indicators on the receivers 14 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 7 indicators on the receivers 7.1 sesam 800 rx the sesam 800 rx model has seven led indicators that is displaying system information (see fig. 1 for positions of the leds). The indications o...

  • Page 15: 7.2

    Indicators on the receivers 15 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 7.2 sesam 800 rxd model the sesam 800 rxd model has an integrated display that shows additional system relevant information (see fig. 5). At activation of a certain function, the transmitter...

  • Page 16: Configurationofthereceiver

    Configuration of the receiver 16 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8 configurationofthereceiver 8.1 sesam 800 rx model 8.1.1 basicconfiguration 1. Open the lid on the receiver (6 tx20 screws). 2. Press the learn/erase button until led 7 is on. The learn m...

  • Page 17

    Configuration of the receiver 17 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.1.2 advancedconfiguration this configuration allows the user to determine which button activates a specific relay. 1. Open the lid on the receiver (6 tx20 screws). 2. Press the learn/era...

  • Page 18: 8.2

    Configuration of the receiver 18 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.2 sesam 800 rxd model 8.2.1 basicconfiguration 1. Press the learn/erase button. The display window shall show “l r n” followed by the memory position that the transmitter will be stored...

  • Page 19

    Configuration of the receiver 19 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 2. To select what memory position to use (memory positions can be 1-500) press the memory position up or memory position down buttons (see fig. 5). The flashing left decimal on the display...

  • Page 20

    Configuration of the receiver 20 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.2.3 erasingtransmittersinthereceiversesam800rxd erasing individual transmitters 1. Press the learn/erase button. The display shows “l r n” followed by the memory position that will be e...

  • Page 21

    Configuration of the receiver 21 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.2.5 pin lock in the receiver the sesam 800 rxd can be protected from unauthorized configuration by us- ing a 4-digit pin-code. When a pin-code is configured, all buttons on the receiver ...

  • Page 22

    Configuration of the receiver 22 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh • when all 4 digits are entered correctly the display will show ‘pas’ (passed) and the buttons on the receiver will be unlocked for 60 seconds. If the pin is incorrect the display will sho...

  • Page 23: 8.3

    Configuration of the receiver 23 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.3 sesam 800 rx din 8.3.1 basicconfiguration 1. Open the lid on the receiver. Open the lid of the receiver by pressing the snap fits on the sides with a screwdriver or similar and pull ap...

  • Page 24

    Configuration of the receiver 24 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh c. Press the learn/erase button three times in order to activate relay three (the status led will flash three times). 3. Press the button that shall be used for activating the selected rel...

  • Page 25: 8.4

    Configuration of the receiver 25 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.4 highsecuritytransmissionmodeforrxandrxd the high security transmission mode uses encrypted authentication to ensures that the receiver only replies to commands from transmitters stored...

  • Page 26: 8.5

    Configuration of the receiver 26 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.5 memory card (only rxd) in applications where many transmitter is used to control one single receiver the receiver can be equipped with a detachable memory card containing a backup of a...

  • Page 27

    Configuration of the receiver 27 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 8.5.2 copyinginformationfromareceivertoamemorycard note that the memory card has to be empty before copying the receiver memory to the card. To remove information from a memory card, inser...

  • Page 28: 9.1

    Description of the transmitters 28 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 9 description of the transmitters 9.1 indicators on the transmitter normal operation quick flashing red = sending message. Continuous green = relay activated in the receiver (feedback in...

  • Page 29

    Description of the transmitters 29 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh the sesam 800 s6 6 button transmitter 1 2 figure13. The sesam 800 s6 transmitter indicatorsandbuttons. 1.Statusled 2.Buttons1-6 the sesam 800 m6 6 button transmitter 1 2 figure14. The se...

  • Page 30

    Replacing batteries in the transmitters 30 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 10 replacingbatteriesinthetransmitters 10.1 replacingbatteriesinsesamk3 if the status led on the transmitter indicates low battery, replace the batteries promptly. Before changin...

  • Page 31

    Replacing batteries in the transmitters 31 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 10.2 replacingbatteriesinthesesam800s3&s6 figure19. Batterycoverand thescrewsholding the cover figure20. Batteries in the transmitter figure21. Back side of the cover inserted in...

  • Page 32

    Replacing batteries in the transmitters 32 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 10.3 replacingbatteriesinsesam800m6 figure22. Batterycoverand thescrewsholding the cover figure23. Batteries in the transmitter figure24. Backside of the cover inserted in its po...

  • Page 33

    Replacing batteries in the transmitters 33 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 10.4 replacingbatteriesinthesesam800l15 if the status led on the transmitter indicates low battery, replace the batteries promptly. Before changing the batteries note that changi...

  • Page 34: 11  Error Codes

    Error codes 34 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 11 error codes the sesam 800 receivers can display a number of error codes. The error codes depends on the model of the receiver. 11.1 error codes, sesam 800 rxd tabell 2. Error codes sesam 800 rxd id alrea...

  • Page 35: 12.1  Measure For  Rx Din

    Receiver drill measure for rx and rxd 35 (36) sesam 800 operating manual document-id: 941211-000 version: d1 author: sh 12 receiver drill measure for rx and rxd 102-103,5 mm 102 mm 120 mm 145 mm 120 mm 225 mm figure28. Thereceivershallbeattachedwith4mmscrewsthataresuitable forthesurroundingenvironme...

  • Page 36

    Åkerströmsbjörboab box 7, se-785 21 gagnef, sweden street björbovägen 143 se-785 45 björbo, sweden phone +46 241 250 00 fax +46 241 232 99 e-mail sales@akerstroms.Com www.Akerstroms.Com ©Åkerströmsbjörboab,2013.