Anodyne Electronics Manufacturing AA82 InterMUSIC Installation And Operation Manual - page 9
AA82 InterMUSIC™ Stereo Intercom System
SM09-1 Installation and Operation Manual
April 16, 2012 Rev: 2.00
Page 2-1
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
Section 2.0 Installation
2.1
Introduction
Information in this section consists of unpacking and inspection procedures, installation procedures, post-
installation checks and installation drawings for the
AA82 InterMUSIC™ Stereo Intercom System
.
Review all notes, warnings and cautions.
2.2
Unpacking and Inspection
Unpack the equipment carefully. Inspect the unit visually for damage due to shipping and report all such
claims immediately to the carrier involved. Check that all items listed below are present before proceeding
and report any shortage immediately to your supplier:
-
AA82 InterMUSIC™ Stereo Intercom System
- Product Information Card
- Certificate of Conformity or Release Certification
- Installation kit with faceplate (crimp type connector)
2.2.1
Warranty
All Anodyne Electronics Manufacturing Corp. (AEM) products are warranted for 2 years. See the website
www.aem-corp.com/warranty for complete details.
2.3
Continued Airworthiness
Maintenance of the
AA82 InterMUSIC™ Stereo Intercom System is ‘on condition’ only. Periodic
maintenance of this product is not required.
2.4
Installation Procedures
2.4.1
Warnings
WARNING:
High volume settings can cause hearing damage.
Set the headset volume control to the minimum volume setting prior to
conducting tests, and slowly increase the headset volume to a
comfortable listening level.