Audemars Piguet 2326 Instructions For Use Manual - page 10
38
39
Rapid date setting
In order to avoid any handling errors, it is advisable
to adjust the date when that the date be changed
when the date mechanism is not operating, i.e.,
between 1 am and 9 pm at the latest.
If the correct date is not displayed on the
watch, pull the crown to position
C
(rapid date
correction) and turn clockwise until the desired
date is displayed.
Carefully screw the crown back to position
A
to
ensure water resistance.
Winding the watch
If the watch were to stop, 30 turns (clockwise)
of the crown in position
B
suffice to wind the
movement fully. The movements of the wearer's
wrist will activate the automatic system and keep
the watch running.
Balance stop when adjusting hands
Automatic simultaneous stop of balance and
second hand when winding crown is pulled out,
allowing you to set the time to within the second.
3. Basic functions
Eng
lis
h
Setting the time
Unscrew the crown and pull it to position
D
. You
may now set the time forwards or backwards.
Recommendation : make sure to set the time
precisely by carefully moving the hands forward
to the time desired.
Warning
: Be careful not to confuse noon and
midnight, due to the change of date.