B&C CL 7685 Operator's Manual - page 21
B&C Electronics
CL 7685
Operator’s Manual - Rev. C - 05/05
-
21
–
[MODE] to go to
----------------------------------
_
D5
|AL 0.0/20.0ppm|
Alarm parameters display
0.0 PPM: lower value limit
20.0 PPM: higher value limit
[CAL] to activate the alarm values programming sequences
[MODE] to go to
----------------------------------
_
D6
|CLEANING OFF |
Cleaning function display
CLEANING OFF: cleaning function disabled
MANUAL CLEAN: manual cleaning function
AUTO
CLEAN:
automatic cleaning function
[CAL] to activate the cleaning function programming sequences of relay D
[MODE] to go to
----------------------------------
_
D7
|01 10.0mA/1.0 pp|
Analog output N°1 / ppm value
[MODE] to go to
----------------------------------
_
D7BIS
|01 10.0mA/1.0 pp|
(Option 091.3711)
Analog output N°2 / (PPM value or temp. value)
[MODE] to go to
----------------------------------
_
D8
|Configuration |
Configuration
display
[CAL] - to activate the keyboard lock/unlock and LCD display contrast selection
sequences
- to activate the configuration sequences
[MODE] to go to
----------------------------------
_
D9
|CL7685 R:2.3x |
P/N and Software release
[MODE] to go back to the main Display D0