B&C Speakers DE 16 Specifications

1" high frequency compression driver. Low mass mylar

diaphragm ensures a very flat frequency response and

optimized ceramic magnet assembly allows for high

sensitivity and low distortion up to 18 kHz.

Specifications

1

Throat Diameter

25 mm (1 in)

Nominal Impedance

8 

Ω

Minimum Impedance

7.8 

Ω

Power Handling

(2200 –20000 Hz)

Nominal

2

30 W

Continuous Program

3

60 W

Sensitivity (1W/1m)

4

107 dB

Frequency Range

1.5 – 18 kHz

Recommended Crossover

5

2.2 kHz

Voice Coil Diameter

44 mm (1.7 in)

Winding Material

Aluminium

Inductance

0.11 mH

Diaphragm Material

Mylar

Flux Density

1.5 T

Also available in 16 

Ω, data upon request

Mounting and Shipping Information 

Two M6 holes 180° on 76 mm (3 in) diameter

Overall Diameter

102 mm (4 in)

Depth

58 mm (2.3 in)

Net Weight (1 unit)

1.6 kg (3.5 lb)

Shipping Weight (8 units)

13.9 kg (30.6 lb)

Shipping Box (8 units)

220x220x150 mm

(8.7x8.7x5.9 in)

1 

Driver mounted on B&C ME 45 horn.

2 

2 hours test made with continuous pink noise signal (6 dB crest factor) within

the specified range. Power calculated on rated minimum impedance.

3 

Power on Continuous Program is defined as 3 dB greater than the Nominal rating.

4 

Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal

Impedance. Average SPL from 1000 to 18000 Hz. 

5 

12 dB/oct. or higher slope high-pass filter.

DE 16

|

Hf Compression drivers

Speakers     HPL     Coaxials     

HF Compression drivers

Horns