B&C Speakers DE 950 Specification Sheet

Specifications

1

Throat Diameter

50 mm (2 in)

Nominal Impedance

8 

Ω

Minimum Impedance

8.3 

Ω

Power Handling

(1200 –20000 Hz)

Nominal

2

80 W

Continuous Program

3

160 W

Sensitivity (1W/1m)

4

109.5 dB

Frequency Range

0.5 – 18 kHz

Recommended Crossover

5

1200 Hz 

Voice Coil Diameter

75 mm (3 in)

Winding Material

Aluminium

Inductance

0.14 mH

Diaphragm Material

Titanium

Flux Density

2.05 T

Also available in 16 

Ω, data upon request

Mounting and Shipping Information 

Four M6 holes 90° on 102 mm (4 in) diameter

Overall Diameter

132 mm (5.2 in)

Depth

85 mm (3.3 in)

Net Weight 

3 kg (6.6 lb)

Shipping Weight (4 units) 

12.5 kg (27.5 lb)

Shipping Box (4 units)

300x160x210 mm

(11.8x6.3x8.3 in)

1 

Driver mounted on B&C ME 75 horn.

2 

2 hours test made with continuous pink noise signal (6 dB crest factor) within

the specified range. Power calculated on rated minimum impedance.

3 

Power on Continuous Program is defined as 3 dB greater than the Nominal rating.

4 

Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal

Impedance. Average SPL from 500 to 18000 Hz. 

5 

12 dB/oct. or higher slope high-pass filter.

DE 950

|

Hf Compression drivers

Top performance 2" high frequency compression driver. The particular mylar/titanium

diaphragm using a 3" edgewound flat aluminium wire voice coil and a FEA computer

optimized lightweight Neodimium magnet assembly using a copper shorting ring result

in excellent response characteristics, very high efficiency and outstanding upper end

performance. The DE 950 features one of the highest magnetic fields currently available.

This unit weights only 2.8 kg. Recommended for low crossover frequencies.

Speakers     HPL     Coaxials     

HF Compression drivers

Horns