B&C Speakers HF Drivers DE10 Specification Sheet

DE10

HF Drivers

LF Drivers

LF Nd Drivers

Coaxials

HF Drivers

Horns

40 W continuous program  power capacity

1” horn throat diameter

25 mm (1 in) aluminium voice coil

Mylar diaphragm

1500 – 18000 Hz response

107 dB sensitivity

Specifications

Throat Diameter (1)

25 mm (1 in)

Nominal Impedance

8 ohm

Minimum Impedance

6.3 ohm

Nominal Power Handling (2)

20 W

Continuous Power Handling (3)

40 W

Sensitivity (1W/1m) (4)

107 dB

Frequency Range

1.5 -18 kHz

Recommended Crossover (5)

2.5 kHz

Voice Coil Diameter

25 mm (1 in)

Winding Material

Aluminium

Inductance

0.1 mH

Diaphragm Material

Mylar

Flux Density

1.55 T

Mounting and Shipping Info

Two M5 holes 180° on 76 mm (3

in) diameter

Overall  Diameter

90 mm (3.5 in)

Depth

53 mm (2.1 in)

Net Weight (1 unit)

0.8 kg  (1.8 lb)

Shipping Weight (8 units)

6.7 kg  (14.7 lb)

Shipping Box (8 units)

220x220x150 mm

(8.7x8.7x5.9 in)

1

Driver mounted on B&C ME10 horn

2

2 hours test made with continuous pink noise signal (6 dB crest factor)

within the specified range . Power calculated on  rated minimum

impedance.

3

Power on Continuous Program is defined as 3 dB greater than the

Nominal rating.

4

Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

5

12 dB/oct. or higher slope high-pass filter.