Installation of front basket or facade
Unscrew the 2 top screws with the help of a
Phillips screw driver, keep screws on the side.
Locate the 4 fixation points.
Take basket out of packaging and open as
shown in the picture on left .you will then be
able to locate the 4 wholes of fixation.
Coincide the wholes of basket with the
fixation points on frame, and then fasten the
basket to the fixation points with the screws
that were put on the side in step 1 and the 2
screws from inside the basket.
View from inside
NOTE: The top case (basket) is mostly preassembled prior to delivery.
The front facade which is optional is installed in the same way as the basket. If the basket is
already installed, you have to dismantle basket so you could install the front facade.