Better by design pro audio video control users manual.
Page intentionally left blank.
3 safety precautions contents 1. The ’quintro+’ pro audio video control operates within 220-240v ac / 50hz. 2. If you have to replace the fuse, you must use a fuse of 250v/ f400 ma / 5 x 20 mm and with the safety approval mark. Never open the cabinet or leave the cabinet open with the mains connecte...
4 thank you, for buying the ’quintro+’. Now you really can enjoy high quality audio and visual entertainment ‘easily’ with the unique features of your ’quintro+’ pro audio video control: 1. A clever central console with simple plug-and-go operation to connect all your audio and video equipment into ...
5 5. Aux input the scart and phono sockets on the front and back panels of input “5 -aux in” are parallel, hence, any one of these three inputs can be used. However, you can connect equipment permanently to the scart or phono sockets of input “5”-aux in”, on the back panel. You may still use the “au...
5 2 3 4 tv 1 tv 1 hi-fi tv 2 tv 1 1 dvd dvd front aux play only or tv 1 audio “quintro+” will automatically switch to the front panel aux input and disable the back panel aux input. If the connection between the tv and the “quintro+” is from scart to scart, the “quintro+” will also switch the tv ont...
5 2 3 4 tv 1 tv 1 hi-fi tv 2 tv 1 1 dvd front aux or or or or or or record only record only record only video 2 video 1 video 1 video 1 & 2 video 1 & 2 (+ video sender) 7 3. Led lamp display: all lamps will turn off and on in green, red or orange fully automatically to show the current video inputs ...
8 2. Lock - depress the lock button to lock the selected input to “scart 1” and the “tv2” phono sockets for uninterrupted recording or watching. I.E., another tv may be connected to the “tv2” phono sockets. 3. Tv2- to select the output video. Button released = output video as that on the scart conne...
9 4. Depress the lock key once to turn on the lock function to prevent recording from interruption. All lamps will change from green to orange. 5. Depress the record key on your vcr and the play key on the video source equipment. Recording will start. Rgb or s-video format can be recorded on “scart ...
10 how to record between two vcr’s: 1. Connect two vcr’s respectively to “scart 1” and “scart 2” sockets. Recording can be done bi- directionally between two vcr’s. 2. To record from the second vcr connected to the ”scart“2” input, select “2” and press the lock key once. Output lamps will change to ...
11 page intentionally left blank.
Www.B-tech-int.Com b-tech international limited, croydon, cr0 9ug, uk..
