Foreword welcome to the pulsar family! You are now the proud owner of the next generation ‘pulsar rs 200’, india's no.1 sports bike. By no.1 we are talking about unparalleled performance, superior technology and incredible market leadership that pulsar today enjoys. This makes the pulsar you ride, u...
Notice: the description and illustration in this booklet are not to be taken as binding on the manufacturers. The essential features of the type described and illustrated herein remaining unaltered. Bajaj auto limited reserves the right to carry out at any moment without being obliged to bring this ...
Engine : 4 stroke, single cyl. Bore x stroke : 72 mm x 49 mm engine displacement : 199.5 cc compression ratio : 11 + 0.5 : 1 idling speed : 1400 +/- 100 rpm max. Net power : 18 kw at 9750 rpm max. Net torque : 18.6 nm at 8000 rpm ignition system : 12 v, dc fi system : single point injection into man...
Side stand indicator : lcd abs indicator : led-amber rear no. Plate lamp : led horn : 12v dc battery : 12v 8ah vrla vehicle kerb weight : 164 kg. Gross vehicle weight : 294 kg. Note : • all dimensions are under unladen condition. • above information is subject to change without any notice. • this ve...
Identification data the frame and engine serial numbers are used to register the motorcycle. They are the unique alpha-numeric codes to identify your particular vehicle from others of the same model and type. Frame number location on seal lock mounting bracket (alpha-numeric - 17 digits) engine numb...
Location of parts 4 grab handle pillion seat rider seat rear disc brake rear brake pedal engine oil level inspection window front brake lever led tail lamp nitrox rear shock absorber front disc brake digital speedometer front fork head lamp.
Steering cum ignition lock to lock the steering : to lock the steering, turn the handle bar to the left side. Turn the handle bar to the left or right. Push & rotate the key to “lock” position & remove the key. Steering locking on handle position left hand side only. To unlock the steering : insert ...
Fuel tank cap • to open the fuel tank cap, open the flap. Insert the key in the lock and turn it clockwise and lift fuel tank cap. • to lock the ‘fuel tank cap’ insert the key in the lock and turn it clockwise and press fuel tank cap. ‘click’ sound ensures cap is fully locked. Precaution : dont atta...
Speedometer details 7 2 3 4 5 6 7 8 9 10 11 1 13 14 16 17 18/19 20 21 12 s m 15.
Speedometer details 8 speedometer display will work when ignition switch is in ‘on’ position. 1. Fuel level indicator: it shows fuel level in fuel tank. 2. Tachometer dial: it shows engine speed in rpm. 3. Turn signal indicator (lh & rh): when turn signal switch is pushed to left or right, turn sign...
Speedometer details 9 17. Speedometer: vehicle speed will be displayed in digital form in km / hr. 18. Odometer : the odometer shows the total distance that the vehicle has covered. Odometer can notbe reset to ‘zero’. 19. Trip meter : trip 1 & trip 2 shows the distance traveled since it was last res...
S m set mode 1. Trip meter reset : • mode & set push button is provided for selecting & resetting ‘odo/trip1/trip2’. 1. Press mode push button for less than 2 sec. Press set push button for more than 5 sec. Mode changes from ‘odo/trip1/trip2’ selected ‘trip1/trip2’ will reset. Other trip mode will c...
S m set mode trip 1 clock 3. Clock reset : • digital clock indicates time in hr & mm separated by colon ‘:’ • it is 12 hour clock. • initially ‘:’ will be blinking • clock setting is possible in trip 1 mode only. 1. Press mode push button for less than 2 sec. Trip1 mode selected 2. Press mode & set ...
Control switches a c. Horn button : ( ) press button for sounding horn. D. Pass switch : press the switch to put on hi beam projector. It is used to give signal to vehicles coming from opposite side while overtaking. Left handle bar switches a. Hi / lo beam switch : head lamp projector low or high b...
Control switches 13 hi/low beam projector effect of switch beam status pass switch low beam low beam ‘on’ hi beam ‘on’ hi beam hi + low beam no change ‘on’ aho feature (automatic headlight ‘on’) there is no ‘light switch’ on rh control switch. Ignition switch ‘on’ speedometer illumination engine ‘of...
Pillion seat / tool kit a tool kit location • it is located on rh side of seat cowl below the ‘pillion seat’. First aid kit location • it is located on lh side of seat cowl below the ‘pillion seat’. Removal of pillion seat • insert key into lock (a) • turn the key clock wise. • lift front end of ‘re...
Rider seat / battery battery • it is located below ‘rider seat’. Removal of rider seat • first remove ‘pillion seat’. • remove ‘rider seat’ mounting bolts (b). • pull backward rear end of ‘rider seat’. • take out ‘rider seat’. B b 15 battery.
B a c d fitment of rider & pillion seat fitment of ‘rider seat’ • match the bracket of ‘rider seat’ (a) with slot (b). • push ‘rider seat’ toward petrol tank. • match ‘rider seat’ rear brackets (c) with the holes (d) provided on chassis. • tighten the bolts (e). Fitment of ‘pillion seat’ • first mak...
Daily safety checks • brake fluid level above min mark provided on reservoir, applicable to disc brake vehicle. • drive chain slack of 15~25mm adequately lubricated. • function of all lights & horn • clutch lever play - 2 to 3 mm • check coolant level between min and max mark in coolant reservoir ta...
How to ride your bike 1. Starting the engine : • turn ignitionswitchkey to ‘ ’ position. • put kill switch in ‘ ’ position. • confirm that transmission is in neutral/ press the clutch lever if transmission is in gear. • keep throttle closed & press starter button, • release starter button as soon as...
4. Braking : • close the throttle completely, leaving the clutch engaged (except where shifting gears) so that the engine braking will help slow down the motorcycle. • shift down one gear at a time so that you are in neutral when you come to a complete stop. • when stopping, always apply both brakes...
6. Parking using side stand : • support the motorcycle on a firm level surface with the side stand. • lock the steering on lhs. 7. Running in proper running-in is important for the better life & trouble free performance of the vehicle. • during first 2000 kms running-in period do not exceed followin...
How to ride your bike fuel saving tips : a well maintained vehicle and good driving can contribute a lot to the saving of petrol. Following are a few simple fuel saving tips. Good riding habits : • ride smoothly and steadily at an optimum driving speed of 40 to 50 km/h • avoid harsh braking. • chang...
Safe riding tips • drive cautiously. Start early & reach your destination safely. • always carry vehicle registration & insurance papers, and a valid driving licence with you. • avoid driving on loose sand or stones where vehicle is likely to skid. • properly wrap-up loose clothes while driving or r...
Engine oil a : oil filler cap b : oil level gauge engine oil level checking : • check engine oil level every day. Park vehicle perpendicular to the ground on level surface. • check oil level through oil level gauge ‘b’. • always maintain engine oil level between upper (c) and lower (d) mark provided...
Tubeless tyre & tyre pressure caution : tubeless tyres are fitted in this motorcycle. The walls of the tyres in contact with the wheel rim should not be damaged in any way during fitment / removal of tyre. The tyre side walls in contact with wheel rim seals air. Tyre pressure : keep appropriate tyre...
Battery battery : 12v - 8 ah vrla • battery is located below rider seat. Battery features : • no topping-up is required • reduced self discharge, enhance safety. • no vent tube open to atmosphere hence no discharge of electrolyte through vent tube. • it is always recommended to hand over the same to...
Engine cooling system • coolant is provided for cooling of engine. • water pump in the engine circulates the coolant in cooling system. • the pressure resulting from the warming of the cooling system is regulated by a valve in radiator cap (a). • heat expansion causes excess coolant to flow into exp...
Coolant coolant level inspection window warning : coolant is poisonous and causes health hazard. Avoid contact between coolant & skin, eyes and clothing. If it gets into your eyes, rinse immediately with water and contact a doctor. Wash affected skin areas immediately with soap and water. If coolant...
Periodic maintenance information spark plug • remove spark plugs by using plug spanner. • clean the spark plugs. • adjust the gaps if incorrect by bending outer electrode carefully. Spark plug gap : 0.7 to 0.9 mm. Spark plug (2 nos.) : bosch (ur6ce) (lh ‘a’ + rh ‘b’ (1 no.) : bosch (yr5neo) (center ...
Periodic maintenance information drive chain must be cleaned & lubricated as per periodic maintenance schedule. Drive chain (o-ring type) • ‘o’ rings must always be kept wet for best performance hence lubricate every 500 km. • o-ring chain lubrication can easily be done by owners using bajaj ‘chain ...
Brake fluid 30 front & rear brake fluid level • front brake fluid reservoir is located on rh side of handle bar. • rear brake fluid reservoir is located behind rh pillion holder bracket. • to check the brake fluid level, park the vehicle perpendicular to the ground on level surface with handle bar i...
31 customer id : instruction to avail free service through digitized free service coupon please follow following procedure : - • please provide your mobile number to dealer at the time of buying of new bajaj vehicle. • in case of change in mobile number, please update to dealer / asc. • you will rec...
Periodic maintenance & lubrication chart 32 recommended frequency service sr. No. Operation 500 ~ 750 4500 ~ 5000 9500 ~ 10000 kms remarks 1. Clean the vehicle with water wash & ensure to prevent water dry completely entry in petrol tank, silencer & electrical parts. Use caustic free detergent for w...
Periodic maintenance & lubrication chart 33 recommended frequency service sr. No. Operation 500 ~ 750 4500 ~ 5000 9500 ~ 10000 kms remarks 9. Valve tappet clearance c, a c, a check & adjust at every 20,000 kms. 10. Sealed drive chain cleaning & cl,l,a cl,l,a cl,l,a cl,l,a cl,l,a cl,l,a cl,l,a cl,l,a...
Periodic maintenance & lubrication chart 34 recommended frequency service sr. No. Operation 500 ~ 750 4500 ~ 5000 9500 ~ 10000 kms remarks every 5000 km after previous service st 1 free nd 2 free rd 3 free 18. All cables & rear brake pedal free play c,a c,a c,a c,a c,a c,a c,a c,a 19. Wiring harness...
Periodic maintenance & lubrication chart 35 recommended frequency service sr. No. Operation 1st 500 ~ 750 2nd 4500 ~ 5000 3rd 9500 ~ 10000 4th 14500 ~ 15000 5th 19500 ~ 20000 6th 24500 ~ 25000 7th 29500 ~ 30000 kms remarks 27. Coolant hose damage/clamps/leakage c c c c c c c 28. Radiator fins c c c ...
Non-use maintenance non-use maintenance is necessary if a vehicle remains off road for a longer duration (more than 15 days**). The correct and careful non- use maintenance carried out before storing the vehicle will prevent the vehicle from rusting and from such other non-operational damages like f...
37 delivery certificate frame no. : engine no. : sold on.: customer’s name mr/mrs/miss : address : contact no. : i have taken possesion of motorcycle along with the following items. 1. Owner's manual 5. Standard accessories 2. 2 nos of key 6. Battery make ___________ sr. No. ____________ 3. Set of t...
Warranty : scope & limit bajaj auto limited gives the following warranty in respect of the ‘pulsar rs 200’ motorcycle manufactured by them. Every possible care and precaution has been taken to ensure quality in respect of the material & workmanship in the vehicles manufactured by us. Bajaj auto limi...
To remove and despatch the part / parts attributing to the manufacturing defect to the company. B. Produces the owner's manual, in original, to enable that dealer to verify the details. It must be expressly understood that claims forwarded directly to us by the owner / customers will not be entertai...
7. All chrome plated parts are prone to rust or corrosion in coastal area or in acidic environment or due to neglected cleaning etc. However chrome film peeling is covered under warranty in general atmospheric conditions. Blue/ yellow colouration of silencer near exhaust port is permissible and henc...
Service record sr. No. Date age mths. Specific gravity voltage remarks dealer’s stamp & signature * code 1 2 3 4 5 6 battery warranty card make of battery : ........................ Mfg. Code of battery : battery sr. No.: battery charging date : type of battery : vehiclesale date : name of owner and...
Details of repair, if any____________________________________________________________________________ note: please contact nearest respective authorised battery dealer for details immediately after purchase of vehicle. Name of dealer & code :__________________________________________________________...
