1. DL manuals
  2. BAK
  3. Welding System
  4. LARON
  5. Operating Instructions Manual

BAK LARON Operating Instructions Manual

Manual is about: automatic welding machine

Summary of LARON

  • Page 1

    Bak thermoplastic welding technology ag 1 operating instructions automatic welding machine laron version 2.1 please read the operating instructions carefully before use and keep for further reference! Before start-up these operating instructions must be examined carefully because we will not assume ...

  • Page 2

    Bak thermoplastic welding technology ag 2 security warning danger of fire and explosion! The hot air stream of the automatic welding machine may not be directed to temperature-sensitive objects or living things. Ensure that a safety distance of 2 m is observed in all directions . Do not point the ho...

  • Page 3

    Bak thermoplastic welding technology ag 3 stop operating the automatic welding machine if: - connecting line or plug have been damaged - safety installations have been damaged - changes occur in the operating state extension cords when using extension cords the minimum diameter of cables must be obs...

  • Page 4

    Bak thermoplastic welding technology ag 4 start up of the automatic welding machine observe the section concerning safety of these operating instructions. Before connecting the tool to the mains supply please check that: - main switch is on pos. 0 off - drive switch is on pos. 0 - heating switch is ...

  • Page 5

    Bak thermoplastic welding technology ag 5 service and repairs work on electrical parts of welding machine may only be performed by an electrical engineer in compliance with electro-technical rules. Do not use the automatic welding machine if the connecting line or the plug is damaged, repairs have t...

  • Page 6

    Bak thermoplastic welding technology ag 6 dv 208 dv 089 dv 111 dv 085 dv 086 dv 084 dv 159 dv 088 dv 112 dv 209 d - 2286 dv 098 dv 215 dv 103 dv 212.1 dv 211.1 dv 220 dv 142 dv 219 dv 218.1.

  • Page 7

    Bak thermoplastic welding technology ag 7 dv 062 dv 124 dv 063 dv 036 dv 042 dv 142 dv 143 dv 001 dv 029 dv 045 dv 128 dv 069 3 dv 023 dv 013 dv 042 dv 068 dv 136 dv 156 dv 029 dv 063 dv 137 dv 146 dv 045 dv 069 dv 114 dv 146 dv 138 dv 059 dv 012 dv 136 dv 153.

  • Page 8

    Bak thermoplastic welding technology ag 8 art. No. Description art. No. Description 6600062 eron 230v laron complete 6601161 sprocket wheel clamp (dv114) 6600063 eron 400v laron complete 6601254 countersunk screw, m6x16 din7991 (dv123) 6601246 o-ring 19x3.5 din3771 (d-1079) 6601162 cheese head screw...

  • Page 9

    Bak thermoplastic welding technology ag 9 eron 230v/400v 5 1 0 1 2 7 0 6 6 0 0 6 13 6107 5 9 1 6 6 0 0 6 3 8 6 1 0 7 5 9 2 6 60 0 6 4 4 6600 6 0 1 6 1 0 0 2 8 4 6 6 0 0 6 2 2 6 1 1 3 6 9 5 d - 22 2 4 6 6 0 0 6 4 8 6 6 00 6 4 7 66 0 0 6 4 6 5 11 2 6 9 3 6 1 0028 7 6 6 0 0 6 5 3 6 6 0 06 0 7 6 6 0 0 6...

  • Page 10

    Bak thermoplastic welding technology ag 10 spare parts list eron 230v/400v art. No. Description qty. 5101270 gasket 70x48x4 1 5101274 mica tube 47.6x134 1 5107612 heating element laron 230v 1 5107613 heating element laron 400v 1 5108222 overlap welding nozzle 40mm 1 5112693 thermocouple 1 6100284 co...

  • Page 11

    Bak thermoplastic welding technology ag 11.