1. DL manuals
  2. BakBone Software
  3. Storage
  4. LTO 2
  5. Application Notes

BakBone Software LTO 2 Application Notes

Summary of LTO 2

  • Page 1

    Device application notes for netvault revision a7 bakbone software, inc. 1 11/3/2003 automated tape subsystem: certance cll3200 lto-2 loader (certance lto2 ldrcll3200) key features • tape slots: 8 • tape drives: 1 • tape drives supported o certance ultrium 2 (viper 400 lto-2) • supported media o lto...

  • Page 2

    Device application notes for netvault revision a7 bakbone software, inc. 2 11/3/2003 attention : device template installation available through the use of standard package installation procedures. Refer to the following for details. Installation: ¾ prerequisites 9 ensure termination is configured co...

  • Page 3

    Device application notes for netvault revision a7 bakbone software, inc. 3 11/3/2003 ¾ selection of device within netvault library robotic arm selection 9 select the device management facilities. 9 select to add a library. 9 select server machine and open it to view attached robotic libraries in “li...

  • Page 4

    Device application notes for netvault revision a7 bakbone software, inc. 4 11/3/2003 drive selection 9 select the drive selection tab. Select server machine and open it to view the attached scsi tape drive. 9 add the drive by selecting the drive and verify the correct device is displayed in the sele...

  • Page 5

    Device application notes for netvault revision a7 bakbone software, inc. 5 11/3/2003 configuration (for optimum performance) 9 select the configure tab, right-click the drive and select configure, to display the configure device dialog box. (refer to figure 3 on next page.) 9 click the configuration...

  • Page 6

    Device application notes for netvault revision a7 bakbone software, inc. 6 11/3/2003 figure 3. Drive performance tuning.

  • Page 7

    Device application notes for netvault revision a7 bakbone software, inc. 7 11/3/2003 other information known firmware issues: none. Device notes: when importing/exporting tapes through the front door, once complete, you must exit (cancel) all the way out of the front panel menus for the loader to re...