BALCO HE180021 Instruction Manual - page 11

11

.

AFTER SALES SUPPORT

 CUSTOMERCARE@BALCOLIFESTYLE.COM   

MODEL: HE180021

Setup 3D Printer Touch

It’s important to set up your printer before every print. We’ve included some 

steps on page 12 in section 1.3 Good 3D Printing Practices for you to 

quickly refer to each time.

3D Printing Process

Now that you’ve loaded a GCODE file onto the printer, it will commence 

heating up the Extruder and Heated Print Bed, then start printing. While 

printing, the nozzle will move along the X and Y axis as each layer is printed. 

This can take some time, depending on the size of the 3D model, print speed 

of the 3D Printer Touch and resolution of each layer. 

Here is an example of how size, infill, and resolution can affect printing time:

Dimensions:

62.5 x 25.75 x 67.75mm

70 x 70 x 140mm

Infill:

20%

0%

20%

20%

Resolution:

2mm

2mm

2mm

1mm

Print Time:

53min

39min

6hr 40min

13hr 12min

Filament Used:

4m

2.54m

45m

45.67m

3D Printed Object

Once the printer has completed all the layers, you will have a 3D Printed Model.

The Balco 3D Printer Touch is compatible with a broad range of filament types and is capable of 

printing 3D models ranging from small and simple to complex objects with moving parts. What you 

print is limited only by your imagination.

INTRODUCTION