Barco MSWU-81E Installation Manual
http://www.barco.com/en/products-solutions/projectors
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
- Remove the lens before transporting the projector.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
9
Important Info
R5905600
-00 MAN QSG MS
WU-
81E
see user manual
ADVANCED
service information
SERVICE
normal/eco/power
MODE
information on lamp status
INFO
select language
LANGUAGE
adjust keystone
KEYSTONE
adjust lens shift
LENS SHIFT
adjust lens zoom
LENS ZOOM
adjust lens focus
LENS FOCUS
modify image aspect ratio
ASPECT RATIO
adjust display mode
COLOR
adjust image contrast
CONTRAST
adjust image brightness level
BRIGHTNESS
Toggle between input sources
INPUT
MODE
M
INFO
i
SERVICE
i
ADVANCED
KEYSTONE
BRIGHTNESS
CONTRAST
COLOR
LENS ZOOM
LANGUAGE
INPUT
LENS FOCUS
ASPECT RATIO
LENS SHIFT
8
OSD Lite Menu
7
Starting Projector
IR Position
Rear
Status Led
IR Position
Front
STBY
ON
Error
During Start-up
1 sec
1 sec
1 sec
1 sec
1 sec
Quick Keys
Quick Key 1
Quick Key 2
Push Menu-UP twice
for instant ‘Picture Mute’
(for Remote and keypad)
Push Menu-OK for
quick access to the
Focus/Zoom Menu
Feedback LED
Menu - UP
Menu - RIGHT
Menu - OK
Menu - LEFT
Menu - DOWN
Home/Menu
Battery Lid
(Slide down
to open)
Power
On/Off
6
Remote Control
ENTER
HOME
ENTER
Displays or hides the OSD adjustment screen.
Press this button to confirm selection of OSD item;
either to “Select item” or to access “Sub Menu” configurations.
STBY
Use this button to start or shut down the projector.
INPUTS
Used to toggle between different input signal sources.
QUICK ACCESS
Press ENTER key for quick access to “Focus/Zoom Menu”
Use these buttons to scroll, configure or adjust items
on the OSD or toggle between different images.
5
Keypad
(HDMI to DVI-D cable
included in the box)
(See User Manual for detailed info)
4
Connectors
3
Ceiling Mount*
305
532
105
160
220
152,5
M6x15 (6x)
M8x15 (3x)
or
Two holepatterns are available
for ceiling mounting:
Unit Weight: 34 kg
Please check the manual of your
supportsystem for compatability
*(Ceiling mount system is not included)
Click!
Carefully align the connectors
while installing the lens.
Remove protective covers from
both ends of the lens before starting.
B
2
Lens Assembly B.
Loosen screw and pull out
black frame towards the front
Turn and pull off
the lens cap
A
2
Lens Assembly A.
(HDMI to DVI-D)
(EU/US/CH)
user
manual
AAA (2x)
1
Packaging Contents
Quick Setup Guide
Congratulations on purchasing
this product
MSWU-81E