Barco PGWU-61B User Manual
http://www.barco.com/en/products-solutions/projectors
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
- Remove the lens before transporting the projector.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
10
Important Info
R5905602
-00 MAN QSG PG-
serie
s
see user manual
ADVANCED
service information
SERVICE
normal/eco/power
MODE
information on lamp status
INFO
select language
LANGUAGE
adjust keystone
KEYSTONE
adjust lens shift
LENS SHIFT
adjust lens zoom
LENS ZOOM
adjust lens focus
LENS FOCUS
modify image aspect ratio
ASPECT RATIO
adjust image colour
COLOR
adjust image contrast
CONTRAST
adjust lamp brightness level
BRIGHTNESS
Toggle between input sources
INPUT
MODE
M
INFO
i
SERVICE
i
ADVANCED
KEYSTONE
BRIGHTNESS
CONTRAST
COLOR
LENS ZOOM
LANGUAGE
INPUT
LENS FOCUS
ASPECT RATIO
LENS SHIFT
9
OSD Lite Menu
8
Starting Projector
OFF/STBY
ON
Error
During Start-up
1 sec
1 sec
1 sec
1 sec
1 sec
Status Led
IR Position
Front
IR Position
Rear
7
Remote Control
Quick Keys
Quick Key 1
Quick Key 2
Push Menu-UP twice
for instant ‘Picture Mute’
(for Remote and keypad)
Push Menu-OK for
quick access to the
Focus/Zoom Menu
Feedback LED
Menu - UP
Menu - RIGHT
Menu - OK
Menu - LEFT
Menu - DOWN
Home/Menu
Battery Lid
(Slide down
to open)
Power
On/StandBy
(See User Manual for detailed info on Inputs)
6
Input Cables
M6x1 depth 8
(4x)
216,2
241,2
30
125
160
*(Ceiling mount system is not included)
Please check the manual of your
supportsystem for compatability
Unit Weight: 18 kg max.
5
Ceiling Mount*
Loosen 3 screws to remove rear cover
and gain access to the inputs panel.
4
Rear Cover
Pull the lever towards the front
while sliding in the lens.
Click!
Pull
forward
4
3
2
1
3
Lens Assembly B
Remove protective covers
from both ends of the lens
before starting assembly.
3
2
1
2
Lens Assembly A
(EU/US/CH)
user
manual
AAA (2x)
1
Packaging Contents
Quick Setup Guide
Congratulations on purchasing
this product
PGWU-61B
PGWX-61B
PGXG-61B