Biospace InBody230 Install Manual
BODY COMPOSITION ANALYZER
Install Manual
1. If you use the InBody230 on a carpet, static electricity may cause serious damage to the
electronic components. If the InBody230 is to be installed on a carpet, use antistatic mats
below the InBody230. Use InBody tissue to wipe feet and hands before the measurement
starts.
2. Do not wipe the base and hand electrode with cleaning liquids. If cleaning liquids enter
into InBody230, it may cause corrosion or electric shock by short circuit. For cleaning of
the InBody230, please use InBody tissue, which also has antibacterial functionality.
3.Do not dismantle InBody230. Internal parts are not for customer use and may cause
electric shock. If InBody230 is dismantled, the warranty is void, and service costs will be
charged.
DANGER
NOTE
CAUTION
Please keep the packaging for future events of repacking InBody230 and sending
it for servicing or otherwise transporting InBody230 elsewhere.
Head
Stand
Base
Hand Electrode
Input Buttons
Foot Electrode
A
B
C
❶
Basic
❶
InBody230
❷
Install Manual 1EA
❸
User’s Manual CD 1EA
❹
Warranty
❺
Adapter 1EA(DC 12V, 3.4A)
❻
Power Cable 1EA
Optional
❼
Thermal printer
❽
SD400 Set
❾
Result Sheet
❿
Carrying Bag
⓫
InBody Tissue
Contents of the Box
A
❷
❸
❹
B
❺
C
❼
❻
❽
❾
❿
⓫
2. Step on the foot plate and measure weight.
3. Enter your personal information and press “ENTER” button.
DEL
ETE
ABC
QZ
DEF
GHI
JK
PRS
TUV
DANGER
NOTE
CAUTION
Failure to connect the device to a properly grounded outlet may result in damage to
the device, inaccurate measurement and/or inappropriate operation due to possible
electrical surges.
DANGER
NOTE
CAUTION
Do not plug the device to a shared power source with any other electrical devices such
as a treadmill, refrigerator, air conditioning unit, microwave or RF medical diathermies
that can be affected by electromagnetic interference. It may result in inaccurate
measurements.
1. Turn on the InBody230 and keep the power on until the home screen
initializes. It will take 15 seconds. During the warming, do not touch
the base.
Measurement
Installation
3. If the air bubble is not in the center of the level indicator, tighten or loosen
the leveling screws(4EA) on the foot plate to adjust the level of InBody230.
InBody230 must be leveled properly for accurate weight measurement.
Level Indicator
Leveling Screws
1. After opening the product box, please remove the accessories box and
the center Air-cell cushion that is covering the InBody.
2. Carefully remove the InBody from the box and place
the InBody230 horizontal to the ground. Raise the
stand, lift the head, and slightly spread the arms.
4. Plug the power adapter cable into the InBody230.
Power switch
* Please use the device after
properly connecting the power
and printer cables to the
appropriate matching port.
케이블고정장치
❺
* Make sure the power cord is firmly plugged into the power adapter.
* Please plug the power cord and the printer power cord to an
electrical outlet. A surge protector is highly recommended.
❺
Earth Ground Pole
Three Pole Socket
❻