C&H Technologies M360 Specification Sheet

C&H Technologies, Inc. • 445 Round Rock West Drive • Round Rock, TX 78681-5012

(512) 733-2621 • FAX (512) 733-2629 • www.chtech.com

Transceiver Characteristics:

Type:

PCA82C250T

TTL signals:

TX0

  (on I/O connector)

TX1

RX0

RX1

Controller:

SJA1000

CANbus support:

Rev. 2.0a

Rev. 2.0b

Front Panel Indicators:

Two LEDs:

User Programmable

Status

Full Interrupt Capabilities

Isolation:

Opto-isolation

devices ship with M360

M Module Compliance

Complies  with  ANSI/VITA  Std  12-

1996 for single-wide M Modules.

Data Transfers

16 bit

Interrupts

INTA

IDENT Implemented

Compatible with VXI, VME, PCI,

PXI, CPCI & Ethernet Carriers

Applications

•  Automotive CAN interfacing

•  Industrial Control

Ordering Information

Part Number

11029690-0001

Additional Information

User Manuals for C&H carriers and

this module can be found on our

website at www.chtech.com.

Specifications:

Serial Port Characteristics:

Data

Rates:

Up to 1 Mbps

Clock Frequency: Programmable

Identifier Fields: Standard (11 bit)

and Extended (29 bit) supported

CAN access priority: Determined

by message identifier

I/O Buffer Memory:

TX:

64 bytes (2 CAN messages)

RX

10 bytes

Connectors:

 9 pin DSUB

(Female)

Temperature:

Operating:

0°C to 60°C

Storage:

-20°C to 70°C

Power:

+5V @ 0.175 A

M360

CAN bus

Controller

M Module

The M360 CAN bus Controller is an

integrated  standalone  controller  for

the  Controller  Area  Network  (CAN)

with  an  M  Module  interface.  CAN  is

used  within  the  automotive  and

general industrial environments. The

M360  contains  all  necessary

hardware  for  high  performance

serial  network  communications.  It

performs  all  the  functions  of  the

physical and data link layers.