Active 5 user manual c & k systems ltd. C031-065 issue 2 www.Ukpanels.Com.
The active 5 user instructions date: feb 1997 1.0 setting 1.1 full set to start the exit procedure ensure all alarmed zones are clear and enter your four digit user code, the speaker will emit a steady sound and the exit time will start. Leave the building by the approved exit route and close the fi...
3.4 resetting the system to reset the panel enter your user code. The speaker will emit a low level two tone alternating ( dee dah ) sound to indicate that there is a "reset required". Press the # key to reset the panel. If the reset is allowed an accept tone will be given the leds for the zones in ...
Important. If you have any problem with your system or any difficulty understanding it’s operation please contact your alarm installer immediately. They will be pleased to help. The following is given so a record of your zone configurations can be made. Simply fill in where each zone is located in y...
