C Security Systems c-pod Installation Manual - Installation Manual
11
Installation Manual
3.
System start-up
Connect the power plug to the pow-
er port marked with
on the C-pod.
The C-pod starts up. Pay attention to
the flashing of the activation button,
which shows the start-up progress.
• The activation button flashes
once
every second
until the C-pod has
connected to the strongest avail-
able cellular (GSM) network.
• The activation button flashes
once
every 3 seconds
until a GPS posi-
tion has been received.
• The activation button flashes
once every 30 seconds
in normal
operating mode to indicate that
the system is running. The start-up
sequence is completed.
A complete list of flash patterns
and their meaning is available in
the Reference manual.
Note:
The start-up sequence
normally takes a few minutes
or more, as the C-pod scans
all available network opera-
tors and receives configura-
tion settings.
Hint:
Before leaving the boat it is rec-
ommended to double-check that the
installation and system start-up has
been successful by sending the text
(SMS) command status or position to
the C-pod System Number. (Refer to
the Reference manual, section Text
(SMS) commands.)