C Security Systems c-pod Installation Manual - Installation Manual
13
Installation Manual
5.
Configuring the system
Before starting to use the system to full extent, some settings need to be con-
figured. Navigate by clicking on the menu items to the left.
a.
Action Plan
The
Action Plan
defines which text (SMS) and/or e-mail messages are sent to
which recipient(s) in case an alarm or warning is triggered. The cell phone
number you used to create your account is already in the list. Other receivers
could, for instance, be a security company, a guard in your marina or a rela-
tive.
b.
Accessories
If you have chosen
not
to install the magnetic intrusion sensor and have
installed no other sensor(s) on Alarm loop 1, you need to disable it. Go to the
menu
Alarms
, then click
Send configuration
. Activating an alarm loop without
any sensor leads to an instant false alarm!
If you have purchased
extra accessories
, they need to be added to the
Acces-
sories
list. Refer to the accessory’s manual.
c.
Battery Level Warning
The
Battery level warning
is set to a default value that fits most 12V systems.
Choose 12V or 24V in the drop-down menu depending on the system in your
boat. Select the desired warning threshold.
Hint:
Check the external battery voltage on the web portal when the boat’s
battery is fully charged and choose a slightly lower value as warning level.
Note:
Some mobile phone operators may charge for received text
(SMS) messages. Always inform persons you add to the Action Plan!