C&T Solution ACO-6000 User Manual

Manual is about: ACO-6000/6010/6011 Series, Surveillance Applied Fanless System

Summary of ACO-6000

  • Page 1

    Aco-6000 series surveillance applied fanless system.

  • Page 2: Table Of Contents

    Aco-6000 l user’s manual table of contents prefaces ……………………………………………………………………………………………….. 04 revision ………………………………………………………..……………………………..……………….……….. 04 disclaimer ……………………………………………………….…….……………….………………….………….. 04 copyright notice …………………………………….…….….………………………………….………………… 04 trademarks acknowledgm...

  • Page 3

    Aco-6000 l user’s manual 3 3.6 installing mini pcie card / msata ……………………...…….….……………………...... 70 3.7 installing antenna ………………...…….………………….……………………..…………...... 71 3.8 assembly chassis top cover …...…….………………………………………..…………...... 73 3.9 installing hdd on internal sata hdd bay …...…….…………………..….………...

  • Page 4: Revision

    Aco-6000 l user’s manual 4 revision disclaimer all specifications and information in this user’s manual are believed to be accurate and up to date. C&t solution inc. Does not guarantee that the contents herein are complete, true, accurate or non-misleading. The information in this document is subjec...

  • Page 5: Safety Precautions

    Aco-6000 l user’s manual 5 safety precautions before installing and using the equipment, please read the following precautions:  put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage.  the power outlet shall be installed near the equipment ...

  • Page 6

    Aco-6000 l user’s manual 6 technical support and assistance 1. Visit the c&t solution inc website at www.Candtsolution.Com where you can find the latest information about the product. 2. Contact your distributor, our technical support team or sales representative for technical support if you need ad...

  • Page 7: Package Contents

    Aco-6000 l user’s manual 7 package contents before installation, please ensure all the items listed in the following table are included in the package. Preface item description q’ty 1 aco-6000 series fanless embedded system 1 2 utility dvd driver 1 3 wall mount kit 1 4 accessory kit 1 5 dvi to vga a...

  • Page 8: Optional Accessories

    Aco-6000 l user’s manual 8 preface model no. Product description aco-6011e-4l-m12 surveillance applied fanless system with lga 1151 for intel® 6 th gen processor and q170 pch, 2x lan, 4x m12 lan, 1x pcie x16 expansion aco-6011e-8l surveillance applied fanless system with lga 1151 for intel® 6 th gen...

  • Page 9: Chapter  1

    Chapter 1 product introductions.

  • Page 10: 1.1 Overview

    Aco-6000 l user’s manual 10 1.1.1 key features  lga 1151 socket for 6 th gen. Intel® core™ i7-6700te (3.5ghz) / core™ i5-6500te (3.3ghz) quad core desktop processor or core™ i3-6100te (2.7ghz) / pentium® g4400te (2.4ghz) / celeron® g3900te (2.3ghz) dual core desktop processor  intel® q170 chipset ...

  • Page 11

    Aco-6000 l user’s manual 11 1.2 hardware specification chapter 1: product introductions processor system • support 6 th gen intel® core™ i3 / i5 / i7 / pentium ® / celeron ® desktop processor (lga 1151) with ami 128mbit spi bios - 6 th gen intel® core™ i7-6700te, quad core, 8mb cache, up to 3.4 ghz ...

  • Page 12: 1.3  System I/o

    Aco-6000 l user’s manual 12 1.3 system i/o 1.3.1 aco-6000 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select...

  • Page 13

    Aco-6000 l user’s manual 13 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 14

    Aco-6000 l user’s manual 14 1.3.2 aco-6000-4l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at or at...

  • Page 15

    Aco-6000 l user’s manual 15 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 16

    Aco-6000 l user’s manual 16 1.3.3 aco-6000-4l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at o...

  • Page 17

    Aco-6000 l user’s manual 17 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 18

    Aco-6000 l user’s manual 18 1.3.4 aco-6000-8l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at or at...

  • Page 19

    Aco-6000 l user’s manual 19 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 20

    Aco-6000 l user’s manual 20 1.3.5 aco-6000-8l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at o...

  • Page 21

    Aco-6000 l user’s manual 21 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 22

    Aco-6000 l user’s manual 22 1.3.6 aco-6010-16l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at or a...

  • Page 23

    Aco-6000 l user’s manual 23 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 24

    Aco-6000 l user’s manual 24 1.3.7 aco-6010-16l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at ...

  • Page 25

    Aco-6000 l user’s manual 25 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 26

    Aco-6000 l user’s manual 26 1.3.8 aco-6011e(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at or atx ...

  • Page 27

    Aco-6000 l user’s manual 27 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 28

    Aco-6000 l user’s manual 28 1.3.9 aco-6011e(p)-4l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at o...

  • Page 29

    Aco-6000 l user’s manual 29 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 30

    Aco-6000 l user’s manual 30 1.3.10 aco-6011e(p)-4l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select...

  • Page 31

    Aco-6000 l user’s manual 31 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 32

    Aco-6000 l user’s manual 32 1.3.11 aco-6011e(p)-8l(p) chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select at ...

  • Page 33

    Aco-6000 l user’s manual 33 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 34

    Aco-6000 l user’s manual 34 1.3.12 aco-6011e(p)-8l(p)-m12 chapter 1: product introductions front panel atx power on/off switch press to power-on or power-off the system reset switch press to reset the system usb 3.0 port used to connect usb 3.0/2.0/1.1 device at/atx mode select switch used to select...

  • Page 35

    Aco-6000 l user’s manual 35 chapter 1: product introductions rear panel dc in used to plug a dc power input with terminal block speaker-out used to connect a speaker mic-in used to connect a microphone digital i/o terminal block the digital i/o terminal block supports 4 digital input and 4 digital o...

  • Page 36

    Aco-6000 l user’s manual 36 1.4 mechanical dimensions 1.4.1 aco-6000 / aco-6000-4l(p) / aco-6000-4l(p)-m12 / aco-6000-8l(p) / aco-6000-8l(p)-m12 unit: mm chapter 1: product introductions.

  • Page 37

    Aco-6000 l user’s manual 37 1.4.2 aco-6010-16l(p) / aco-6010-16l(p)-m12 unit: mm chapter 1: product introductions.

  • Page 38

    Aco-6000 l user’s manual 38 1.4.3 aco-6011e(p) / aco-6011e(p)-4l(p) / aco-6011e(p)-4l(p)-m12 / aco-6011e(p)-8l(p) / aco-6011e(p)-8l(p)-m12 unit: mm chapter 1: product introductions.

  • Page 39: Chapter  2

    Chapter 2 switches and connectors.

  • Page 40

    Aco-6000 l user’s manual 40 2.1 switch and connector locations 2.1.1 top view chapter 2: switches and connectors.

  • Page 41

    Aco-6000 l user’s manual 41 chapter 2: switches and connectors 2.1.2 bottom view.

  • Page 42

    Aco-6000 l user’s manual 42 2.2 connector / switch definition list of connector / switch chapter 2: switches and connectors connector location definition at_atx1 at / atx power mode switch clr_cmos1 clear bios switch pwr_sw1 power switch reset1 reset switch usb3_1,usb3_2 usb 3.0 port usb2_1, usb2_2 ...

  • Page 43: 2.3 Switches Definitions

    Aco-6000 l user’s manual 43 2.3 switches definitions switch definition 1-2 (left) at power mode 2-3 (right) atx power mode(default) at_atx1: at / atx power mode switch clr_cmos1: clear bios switch switch definition off normal status (default) on clear bios chapter 2: switches and connectors switch d...

  • Page 44

    Aco-6000 l user’s manual 44 chapter 2: switches and connectors step of setting power ignition step 1 to select power ignition by pc/car switch. Step 2 to select battery input voltage by 12v / 24v switch. Step 3 to configure the power off delay time, please check the delay time setting options in adv...

  • Page 45: 2.4 Connectors Definitions

    Aco-6000 l user’s manual 45 2.4 connectors definitions pwr_sw1: power button pin definition pin definition 1 nc 4 gnd 2 power button 5 nc 3 nc 6 gnd reset1 : reset button pin definition 1 reset 2 gnd usb3_1: usb3.0 connector, type a pin definition pin definition 1 +5v 6 usb3_rx5+ 2 usb2_d5- 7 gnd 3 ...

  • Page 46

    Aco-6000 l user’s manual 46 usb2_1: usb3.0 connector, type a pin definition 1 +5v 2 usb2_d7- 3 usb2_d7+ 4 gnd usb2_2: usb3.0 connector, type a pin definition 1 +5v 2 usb2_d8- 3 usb2_d8+ 4 gnd usb2_cn1: usb2.0 ports connector type: 2x5 10-pin box header, 2.54mm pitch pin definition pin definition 1 +...

  • Page 47

    Aco-6000 l user’s manual 47 sim3:sim card socket pin definition pin definition c1 uim3_pwr c5 gnd c2 uim3_reset c6 uim3_vpp c3 uim3_clk c7 uim3_data com1_2_1: rs232 / rs422 / rs485 connector connector type: 9-pin d-sub com1 pin rs232 definition rs422 / 485 full duplex definition rs485 half duplex de...

  • Page 48

    Aco-6000 l user’s manual 48 com3_1: rs232 / rs422 / rs485 connector connector type: 2x5 10-pin box header, 2.54mm pitch com3_1 pin rs232 definition rs422 / 485 full duplex definition rs485 half duplex definition 1 dcd3 tx3- data3- 2 rxd3 tx3+ data3+ 3 txd3 rx3+ 4 dtr3 rx3- 5 gnd 6 dsr3 7 rts3 8 cts3...

  • Page 49

    Aco-6000 l user’s manual 49 dc_in1: dc power input connector (+9~48v) connector type: terminal block 1x3 3-pin, 5.0mm pitch pin definition 1 +9~48vin 2 chassis gnd 3 gnd dvi_i1: dvi-i connector pin definition pin definition 1 dvi_tx2- 16 dvi hot plug detect 2 dvi_tx2+ 17 dvi_tx0- 3 gnd 18 dvi_tx0+ 4...

  • Page 50

    Aco-6000 l user’s manual 50 dp2: displayport connector pin definition pin definition 1 dp2_lane0_p 11 gnd 2 gnd 12 dp2_lane3_n 3 dp2_lane0_n 13 gnd 4 dp2_lane1_p 14 gnd 5 gnd 15 dp2_aux_p 6 dp2_lane1_n 16 gnd 7 dp2_lane2_p 17 dp2_aux_n 8 gnd 18 dp2_hpd 9 dp2_lane2_n 19 gnd 10 dp2_lane3_p 20 dp2_pwr ...

  • Page 51

    Aco-6000 l user’s manual 51 dio1: digital input / output connector connector type: terminal block 2x9 18-pin, 3.5mm pitch pin definition pin definition 1 di1 2 do1 3 di2 4 do2 5 di3 6 do3 7 di4 8 do4 9 di5 10 do5 11 di6 12 do6 13 di7 14 do7 15 di8 16 do8 17 dc input 18 gnd chapter 2: switches and co...

  • Page 52

    Aco-6000 l user’s manual 52 pwr_sw2 : remote power switch connector type: terminal block 1x2 2-pin, 3.5mm pitch pin definition 1 power button 2 gnd digital input wurung digital output wurung chapter 2: switches and connectors.

  • Page 53

    Aco-6000 l user’s manual 53 cn1: lan1 and usb3.0 ports connector type: rj45 port with leds and dual usb3.0 ports pin definition pin definition pin definition 1 +5v 10 +5v 20 lan1_mdi0p 2 usb2_d1- 11 usb2_d2- 21 lan1_mdi0n 3 usb2_d1+ 12 usb2_d2+ 22 lan1_mdi1p 4 gnd 13 gnd 23 lan1_mdi2p 5 usb3_rx1- 14...

  • Page 54

    Aco-6000 l user’s manual 54 minipcie1: mini pci-express socket minipcie2: mini pci-express socket chapter 2: switches and connectors pin definition pin definition pin definition 1 wake# 19 nc 37 gnd 2 +3.3v 20 +3.3v 38 usb2_d11+ 3 nc 21 gnd 39 +3.3v 4 gnd 22 minipcie rst# 40 gnd 5 nc 23 minipcie_rxn...

  • Page 55

    Aco-6000 l user’s manual 55 chapter 2: switches and connectors minipcie3: mini pci-express / msata socket pin definition pin definition pin definition 1 wake# 19 nc 37 gnd 2 +3.3v 20 +3.3v 38 usb_d14+ 3 nc 21 gnd 39 +3.3v 4 gnd 22 minipcie rst# 40 gnd 5 nc 23 minipcie_rxn18 (sata_rxn5) 41 +3.3v 6 +1...

  • Page 56

    Aco-6000 l user’s manual 56 sata1, sata2: sata with power connector pin sata1 definition pin sata1 definition pin sata2 definition pin sata2 definition 1 gnd 12 gnd 1 gnd 12 gnd 2 sata_txp0 13 gnd 2 sata_txp1 13 gnd 3 sata_txn0 14 +5v 3 sata_txn1 14 +5v 4 gnd 15 +5v 4 gnd 15 +5v 5 sata_rxn0 16 +5v 5...

  • Page 57

    Aco-6000 l user’s manual 57 power1, power2, power3, power4: power connector connector type: 1x4-pin wafer, 2.0mm pitch pin definition 1 +5v 2 gnd 3 gnd 4 +12v pcie1: pci-express x1 socket connector type: pci-express x1 slot pin definition pin definition a1 nc b1 +12v a2 +12v b2 +12v a3 +12v b3 +12v ...

  • Page 58

    Aco-6000 l user’s manual 58 pcie1: pci-express x16 socket connector type: pci-express x16 slot pin definition pin definition pin definition pin definition a1 pcie_prsnt1 a42 gnd b1 +12v b42 peg_txn6 a2 +12v a43 peg_rxp6 b2 +12v b43 gnd a3 +12v a44 peg_rxn6 b3 +12v b44 gnd a4 gnd a45 gnd b4 gnd b45 p...

  • Page 59

    Aco-6000 l user’s manual 59 59 chapter 2: switches and connectors pwr_led1: power led status pin definition 1 power led+ 2 power led- pin definition 1 hdd led+ 2 hdd led- hdd_led1: hdd access led status pin definition 1 watchdog led+ 2 watchdog led- wdt_led1: watchdog led status pin definition 1 gpi...

  • Page 60: Chapter  3

    Chapter 3 system setup.

  • Page 61: Unscrewing.

    Aco-6000 l user’s manual 61 3.1 set torque force to 3.5 kgf-cm to execute all the screwing and unscrewing. 3.2 removing chassis bottom cover 1. Turn the system upside down. Unscrew the 6 screws (m3x5l) on the bottom cover. 2. Now you can remove the bottom cover. Chapter 3: system setup in order to p...

  • Page 62

    Aco-6000 l user’s manual 3.2 removing pcie/pci expansion module 1. This step only applies to aco-6011 series, which is equipped with pcie/pci expansion module. 2. Unscrew four screws (m3x5l) circled below. 3. Now you can remove the pcie/pci expansion module. 62 chapter 3: system setup.

  • Page 63

    Aco-6000 l user’s manual 63 3.3 removing chassis top cover 1. Unscrew the four screws (m3x5l) highlighted below. 2. Hold the body of the system and lift it vertically away from the top cover. 3. Top cover separated from the system body. Chapter 3: system setup.

  • Page 64: 3.4 Installing Sodimm

    Aco-6000 l user’s manual 64 3.4 installing sodimm 1. Place the system body with sodimm socket facing upward. Two sodimm sockets are available for aco-6000 series on the top side. 2. Insert memory module from 45 degree direction. 3. Press the memory module vertically downward until you hear the “clic...

  • Page 65: 3.5 Installing Cpu

    Aco-6000 l user’s manual 65 3.5 installing cpu 1. Cpu socket is located on the top side. 2. Press down the cpu socket lever in order to open the socket cover. Chapter 3: system setup.

  • Page 66

    Aco-6000 l user’s manual 66 3. Remove the cpu protective cover. 4. Insert cpu gently. Chapter 3: system setup.

  • Page 67

    Aco-6000 l user’s manual 67 5. Press down the lever again to hold the socket cover. 6. Paste thermal pad (1-br0500040, 29x29x0.5mm) on the cpu. Chapter 3: system setup.

  • Page 68

    Aco-6000 l user’s manual 68 7. Place the designated heat block onto the cpu with thermal pad. 8. Lock the heat block with three screws (m3x5l). Screw driver will able to penetrate through the holes on the top in order to fasten the screws with copper stud. Chapter 3: system setup.

  • Page 69

    Aco-6000 l user’s manual 69 9. Paste the thermal pad (1-br0500041, 76x70x2.0mm) onto the installed heat block. 10. Installation complete. Chapter 3: system setup.

  • Page 70

    Aco-6000 l user’s manual 70 3.6 installing mini pcie card / msata 1. Three mini pcie slots are available for aco-6000 series, two on top side and one on bottom side. Minipcie2 on the bottom side and minipcie3 on the top side support msata. 2. Insert mini pcie card from 45 degree direction. 3. Press ...

  • Page 71: 3.7 Installing Antenna

    Aco-6000 l user’s manual 71 3.7 installing antenna 1. Four antenna holes are available for aco-6000 series on the rear panel and two holes are on the front panel. 2. Remove antenna hole cover on the system panel. 3. Have antenna jack penetrate through the hole. Chapter 3: system setup.

  • Page 72

    Aco-6000 l user’s manual 72 4. Put on washer and fasten the nut with antenna jack. 5. Assemble the antenna and antenna jack together. 6. Attach the rf connector at the cable-end onto the communication module. Chapter 3: system setup.

  • Page 73

    Aco-6000 l user’s manual 73 3.8 assembly chassis top cover 1. Place the top cover upside down as shown below. 2. Ensure thermal pad is in place on both the cpu thermal block and pch thermal block. 3. Hold the system body and slide the front/rear panel into the slide rail on the top cover. Chapter 3:...

  • Page 74

    Aco-6000 l user’s manual 74 4. Push the system body down until it is firmly in place. 5. Fasten the four screws (m3x5l) to lock the system body with top cover. Chapter 3: system setup.

  • Page 75

    Aco-6000 l user’s manual 75 3.9 installing hdd on internal sata hdd bay 1. Place the top cover upside down as shown below. 2. Unscrew the four screws (m3x5l) to remove the internal sata hdd bay. 3. Lock the 2.5” hdd with hdd bracket using four screws (m3x4l). Chapter 3: system setup.

  • Page 76

    Aco-6000 l user’s manual 76 4. Install the hdd bracket following the direction below. 5. Fasten the four screws to lock the internal hdd bracket. Chapter 3: system setup.

  • Page 77

    Aco-6000 l user’s manual 77 3.10 installing hdd on removable sata hdd bay 1. Two removable sata hdd bays are available for aco-6000 series. 2. Unscrew the two sun screws circled below to take out the removable sata hdd bay. 3. Lock the 2.5” hdd with hdd bracket using four screws (m3x4l). 4. Slide th...

  • Page 78

    Aco-6000 l user’s manual 78 3.11 installing pcie/pci expansion card 1. Pcie or pci card with fhhl dimension is supported by aco-6000 series. 2. Unscrew the screw (m3x5l) to remove the plane bracket. 3. Loose the sun screw (circled below) on the holder so the pairing arm can be adjustable. 4. Install...

  • Page 79

    Aco-6000 l user’s manual 79 5. Adjust the arm until it holds the card firmly in place. Then fasten the sun screw on the holder. 3.12 installing pcie/pci expansion module 1. Install the expansion module back in place and ensure the golden finger is inserted into the expansion slot. Chapter 3: system ...

  • Page 80

    Aco-6000 l user’s manual 80 2. Fasten the four screws (m3x5l) below to lock the expansion module. 3.13 assemble chassis bottom cover 1. Place the bottom cover according to the below direction and make sure the rail is facing inside the system. Chapter 3: system setup.

  • Page 81: 3.14 Installing Sim Card

    Aco-6000 l user’s manual 81 2. Lock the bottom cover with the six screws (m3x5l). 3.14 installing sim card 1. For aco-6000 series, sim card slot is located inside the control area. Unscrew the two screws below to remove the cover bracket. Chapter 3: system setup.

  • Page 82

    Aco-6000 l user’s manual 82 2. Now you can insert sim card into the socket. 3. Please note that the installation of sim cards has to match the installation of mini pcie slots. 4. To uninstall sim card, simply press the installed sim card and then the card will be pushed out. Chapter 3: system setup ...

  • Page 83

    Aco-6000 l user’s manual 83 3.15 installing wall mount kit 1. Wall mount kit is available for aco-6000 series included in the standard package. 2. Place the system upside down so you can see the bottom cover. The highlighted eight screw holes below will be used. 3. Lock the wall mount kit with eight...

  • Page 84: Chapter  4

    Chapter 4 bios setup.

  • Page 85: 4.1 Bios Introduction

    Aco-6000 l user’s manual 85 chapter 4: bios setup 4.1 bios introduction the system bios software is stored on eeprom. The bios provides an interface to modify the configuration. When the battery is removed, all the parameters will be reset. Bios setup power on the embedded system and by pressing or ...

  • Page 86: 4.2 Main Setup

    Aco-6000 l user’s manual 86 chapter 4: bios setup 4.2 main setup press to enter bios cmos setup utility, the main menu (as shown below) will appears on the screen. Use arrow keys to move among the items and press to accept or enter a sub-menu. 4.2.1 system language language setup allows the user to ...

  • Page 87: 4.3 Advanced Setup

    Aco-6000 l user’s manual 4.3 advanced setup this section allows you to configure and improve your system and allows you to set up some system features according to your preference. 4.3.1 acpi settings ■ enable acpi auto configuration enable or disable bios acpi auto configuration. 87 chapter 4: bios...

  • Page 88

    Aco-6000 l user’s manual 88 4.3.2 amt configuration intel active management technology (amt) is hardware-based technology for remotely managing and securing pcs out-of-band. ■ intel amt this item allows users to enable or disable intel amt bios extension. ■ un-configure me use this function to enabl...

  • Page 89

    Aco-6000 l user’s manual 89 4.3.3 nct6106d super io configuration ■ serial port 1 configuration  serial port this item will allow users to enable or disable serial port.  change settings this setting is used to change the address & irq settings of the specified serial port.  device type select ch...

  • Page 90

    Aco-6000 l user’s manual ■ serial port 2 configuration  serial port this item will allow users to enable or disable serial port.  change settings this setting is used to change the address & irq settings of the specified serial port.  device type select change the serial interface. Select , or in...

  • Page 91

    Aco-6000 l user’s manual ■ serial port 4 configuration  serial port this item will allow users to enable or disable serial port.  change settings this setting is used to change the address & irq settings of the specified serial port.  device type select change the serial interface. Select , or in...

  • Page 92

    Aco-6000 l user’s manual 92 4.3.5 serial port console redirection ■ console redirection this item allows users to enable or disable console redirection. 4.3.6 cpu configuration ■ hyper-threading this item allows you to enable or disable the intel hyper-threading technology. ■ active processor cores ...

  • Page 93

    Aco-6000 l user’s manual ■ cpu c states this item allows you to set the power saving of the cpu states.  enhanced c state this item allows your cpu reduce power consumption ■ package c state limit select auto for the ami bios to automatically set the limit on the c-state package register. The optio...

  • Page 94

    Aco-6000 l user’s manual 94 4.3.9 csm configuration ■ csm support this item allows you to enable or disable csm support. ■ gatea20 active this item allows you to select or . Upon request: ga20 can be disabled using bios services. Always: do not allow ga20 disabling. This option is useful when any rt...

  • Page 95

    Aco-6000 l user’s manual 95 4.3.10 usb configuration ■ legacy usb support this item allows you to select , or . Enabled: to enable legacy usb support. Disabled: to keep usb devices available only for efi specification, auto: to disable legacy support if no usb devices are connected. ■ xhci hand-off ...

  • Page 96: 4.4 Chipset

    Aco-6000 l user’s manual 96 4.4 chipset this section allows you to configure and improve your system and allows you to set up some system features according to your preference. 4.4.1 system agent (sa) configuration ■ vt-d this item allows users to enable or disable vt-d. Chapter 4: bios setup.

  • Page 97

    Aco-6000 l user’s manual 97 chapter 4: bios setup ■ graphic configuration  detect non-compliance device detect non-compliance pci express device. If enable, it will take more time at post time.  gtt size this item allows you to change the gtt size.  aperture size aperture size optimal between 128...

  • Page 98

    Aco-6000 l user’s manual 4.4.2 pch-io configuration this section allows you to configure the chipset. ■ pci express configuration 98 chapter 4: bios setup.

  • Page 99

    Aco-6000 l user’s manual  pci express root port 1 / 3 / 4 / 5 / 6 / 7 / 8 / 9  pci express port 1 / 3 / 4 / 5 / 6 / 7 / 8 / 9 this item allows you to enable or disable pci express port 1 / 3 / 4 / 5 / 6 / 7 /8 / 9 in the chipset.  aspm this item allows you to select the aspm state for energy-savi...

  • Page 100

    Aco-6000 l user’s manual ■ hd audio configuration  hd audio control detection of the hd-audio device. This item allows you to select , or . Disabled: azalia will be unconditionally be disabled. Enabled: azalia will be unconditionally be enabled. Auto: azalia will be enabled if present, disabled oth...

  • Page 101: 4.5 Security

    Aco-6000 l user’s manual 101 4.5 security security menu allow users to change administrator password and user password settings. 4.5.1 administrator password this item allows you to set administrator password. 4.5.2 user password this item allows you to set user password. Chapter 4: bios setup.

  • Page 102: 4.6 Boot

    Aco-6000 l user’s manual 102 4.6 boot this menu allows you to setup the system boot options. 4.6.1 setup prompt timeout this item sets number of seconds to wait for setup activation key. 4.6.2 bootup numlock state this item selects the keyboard numlock state. Select or . 4.6.3 full screen logo show ...

  • Page 103: 4.7 Save & Exit

    Aco-6000 l user’s manual 103 4.7 save & exit this setting allows users to configure the boot settings. 4.7.1 save changes and reset this item allows user to reset the system after saving the changes. This item allows user to reset the system after saving the changes. 4.7.2 discard changes and reset ...

  • Page 104: Appendix

    Appendix wdt & gpio this appendix provides the sample codes of wdt (watch dog timer) and gpio (general purpose input/ output)..

  • Page 105: Wdt Sample Code

    Aco-6000 l user’s manual 105 wdt sample code sio_index_port equ 02eh sio_data_port equ 02fh sio_unlock_value equ 087h sio_lock_value equ 0aah watchdog_ldn equ 008h wdt_unit equ 00h ; 00h=second, 80h=minute, wdt_timer equ 30 ; ex. 30 seconds sample code: ;enable config mode mov dx, sio_index_port mov...

  • Page 106: Gpio Sample Code

    Aco-6000 l user’s manual 106 gpio sample code  gpi 0 ~ gpi 7  gpo 0 ~ gpo 7 sio_index_port equ 02eh sio_data_port equ 02fh sio_unlock_value equ 087h sio_lock_value equ 0aah sio_ldn_gpio equ 07h gpi_reg equ 0edh gpo_reg equ 0f1h gpo_0 equ 00000001b gpi_reg equ 0a03h gpo_reg equ 0a02h gpo_0 equ 0001...

  • Page 107

    Aco-6000 l user’s manual 107 ; get gpi 0 pin status register mov dx, sio_index_port mov al, gpi_reg out dx, al mov dx, sio_data_port in al, dx ;al bit0 = gpi 0 status ; exit sio mov dx, sio_index_port mov al, sio_lock_value out dx, al #2 : set gpo 0 status to high ; enable config mode mov dx, sio_in...

  • Page 108

    Copyright © c&t solution inc. All rights reserved www.Candtsolution.Com.