CABAC HNS210TD Owner's Manual
Customer Care Australia P: 133 122 F: 1300 303 310 E: sales@cabac.com.au W: cabac.com.au
A: 8 Distribution Pl, Seven Hills NSW 2147
Customer Care New Zealand P: 8 0077 6969 F: 8 0088 6969 E: sales@cabac.co.nz W: cabac.co.nz
1
S-CLICK WALL TIMER MANUAL
2013 July 10th, Revision 1.3
1. FEATURES
• Push button timer with on/off and on/restart operation options
• Easy DIP switch time delay settings
• Run time selection from 15 seconds to 252 minutes
• Also able to be controlled from a simple remote momentary-action switch
• Back module can click onto popular Australian (Clipsal & HPM) style one gang wall plate
• Both Clipsal & HPM style push buttons are provided for a perfect fit
2. SPECIFICATIONS
3. WIRING
Refer Fig. 1 Terminal connections:
ACTIVE
Connection to mains Active
NEUTRAL Connection to mains Neutral
LOAD
Switched Active output connected to Load
Connect Load between this terminal and Neutral
EXT
Connection for remotely located momentary-action switches
Neutral
Load
Active
Ext
Neutral
Active
HNS210TD
Load
Remote
Momentary
Action
Switches
Fig.1 Example wiring diagram
HNS210TD
OWNER’S MANUAL
Supply Voltage
220-240V a.c. 50Hz*
Max Load
10AX
Min. Load
0A
Timer Range
15 seconds - 252 minutes
Timer Tolerance
±10%
Safety Compliance
AS/NZS 3100
EMC Compliance
AS/NZS CISPR15
* Not suitable to be driven by a DC-AC inverter.
Note: This manual was correct at the time of manufacture. For the latest version of the manual and any technical or
safety updates refer to the website:- cabac.com.au, cabac.co.nz or scan the QR code with a mobile phone.
Scan our QR code
with your phone to go
directly to our website for
technical information