Cablesson 104026 User Manual

Manual is about: HDElity HDMI EDID reader/writer with HDCP support

Summary of 104026

  • Page 1

    Hdelity hdmi edid reader/ writer with hdcp support user manual.

  • Page 2

    1 hdelity hdmi edid reader/writer with hdcp support follow all instructions and warnings marked on this unit. Do not attempt to service this unit yourself, except where explained in this manual. Provide proper ventilation and air circulation and do not use near water. Keep away from sharp objects th...

  • Page 3

    Introduction the 104026 hdelity hdmi edid reader/writer with hdcp support with usb control is a device that can emulate the edid (extended display identification data) information. It stores and recalls a default edid setting in non-volatile memory and supports hdcp handshaking. 104026 allows your h...

  • Page 4

    Package contents 3 specifications & package contents model name technical dvi compliance hdcp compliance video bandwidth video support input output hdmi connector usb connector flash eeprom mechanical housing dimensions [l x w x h] model package carton weight model package fixedness power supply pow...

  • Page 5: Front Panel

    4 front panel rear panel hdelity hdmi edid reader/writer with hdcp support 1 2 3 6 4 5 0 = [video] – supports up to hdmi 1.3 output. [audio] – supports up to 7.1ch output 1 = [video] – supports up to hdmi 1.3 output. [audio] – lock to stereo audio output 2 = [video] – locks to hdmi 1.2 output. [audi...

  • Page 6

    5 connection diagram hdelity hdmi edid reader/writer with hdcp support *to avoid initiating undesired errors during switching between modes (e.G. Changing from recording mode to connection mode might overwrite the edid of the display in the edid reader/writer/re-timer by the default edid), please un...

  • Page 7

    Hardware installation connect the display device to the edid reader/writer/re-timer via monitor-hdmi port. Plug in the 5v dc power supply unit. Set 104026 to the mode 6. The edid reading sequence is done when the green led lights off. Switch the rotary switch back to mode 0 ~ 4. 1. 2. 3. 4. 5. Set 1...

  • Page 8

    7 hdelity hdmi edid reader/writer with hdcp support before running the software, please make sure the rotary switch is set to 7. 1) getting started.

  • Page 9

    8 hdelity hdmi edid reader/writer with hdcp support 2) create edid 1. Firstly please select the edid belonging to hdmi or dvi mode 2. Hdmi mode 3. Dvi mode “save edid on computer” to save the generated edid as a file “save edid to 104026” to copy the generated edid to 104026 “save edid on computer” ...

  • Page 10

    9 hdelity hdmi edid reader/writer with hdcp support 3) view display’s edid read the edid from the display and analyze it.

  • Page 11

    10 hdelity hdmi edid reader/writer with hdcp support 4) view 104026 edid read the edid from 104026 and analyze it.

  • Page 12

    11 limited warranty the seller warrants the 104026 hdelity hdmi edid reader/writer with hdcp support to be free from defects in the material and workmanship for 1 year from the date of purchase from the seller or an authorized dealer. Should this product fail to be in good working order within 1 yea...