CADDX 8600 Manual

Other manuals for 8600: Installation Manual
Manual is about: Downloadable Control Communicator

Summary of 8600

  • Page 1

    1 security system notes installing / service company: for service call: security system configuration master code: " quick arm " digit: auxiliary code(s) 2 3 4 5 6 7 exit delay time auxiliary exit delay time entry delay time auxiliary entry delay time fire alarm sound steady siren 9 pulsing bell 9 b...

  • Page 2

    2 this manual is furnished to help you understand your security system and become proficient in its operation. All users of your security system should read and follow the instructions and precautions in this booklet. Failure to do so could result in the security system not working properly. This bo...

  • Page 3

    3 how to arm your security system to arm the security system, close all of the protected doors and windows. The green "ready" light on the keypad control will be illuminated when all of the protected zones and sensors are secure. If any of the zones are bypassed, a sensor in that zone can be violate...

  • Page 4

    4 automatic bypass option if checked, the "automatic bypass" option has been selected by your installing company. With this feature enabled, all interior zones will automatically bypass if you "arm" your security system and do not leave through a designated entry/exit door. The "automatic bypass" wi...

  • Page 5

    5 keypad activated fire alarm if checked, this feature has been selected by your installing company. If so, you can activate the fire alarm by pressing the one [ 1] and three [3] keys at the same time for one second. If your system is connected to a monitoring center, an emergency report could be se...

  • Page 6

    6 programming auxiliary codes - in order to program auxiliary codes, you must know the master code. As stated earlier, each auxiliary code has its own unique number from 2, thru 7 and must be referred to by its number. It is programmed much like the master code. For example, to program auxiliary use...

  • Page 7

    7 keypad control tones (beeps) a sounder is built into the keypad and may sound for any of the following reasons: # beeps for all keypresses. # sounds a continuous tone during the entry delay time. # pulses when a "day zone" is violated, a zone configured for fire has a trouble condition, or when th...

  • Page 8

    8 emergency evacuation plans an emergency evacuation plan should be established for an actual fire alarm condition. For example, the following steps are recommended by the national fire protection association and can be used as a guide in establishing an evacuation plan for your building. Draw up a ...

  • Page 9

    9 system notes.

  • Page 10

    8600 user ==s manual 8600uf98 rev f (01-20-98).