Campbell Hausfeld IRONFORCE IFK003 Notice

• NOTICE •

This spray gun is shipped in Siphon Feed mode, used for

a finer finish with light materials. To use the gun with

high-viscosity materials such as latex paint, use the

Pressure Feed mode.

To change from Siphon Feed to Pressure Feed mode,

turn the knob shown above from ‘S’ to ‘P’ until finger

tight. 

Thoroughly mix the material in accordance with the

manufacturer’s instructions. If necessary, thin per paint

manufacturer’s instructions.

IN170233AV 7/03

© 2003 Campbell Hausfeld/Scott Fetzer

For parts, product & service information

visit www.chpower.com

IFK003  

S

P

P S

• NOTICE •

This spray gun is shipped in Siphon Feed mode, used for

a finer finish with light materials. To use the gun with

high-viscosity materials such as latex paint, use the

Pressure Feed mode.

To change from Siphon Feed to Pressure Feed mode,

turn the knob shown above from ‘S’ to ‘P’ until finger

tight. 

Thoroughly mix the material in accordance with the

manufacturer’s instructions. If necessary, thin per paint

manufacturer’s instructions.

IN170233AV 7/03

© 2003 Campbell Hausfeld/Scott Fetzer

For parts, product & service information

visit www.chpower.com

IFK003  

S

P

P S