Camry EK-19A SERIES Instructions For Use

Page of 4

Download

Bookmark us

13EK-019E R2

CLEANING AND CARE

MEASURING

CUP SCALES

INSTRUCTIONS FOR USE

EK-19A SERIES

ISO 9001:2008 CERTIFIED BY SGS

2. All plastic parts should be cleaned immediately after contact with fats,

spices, vinegar and strongly flavored/colored foods. Avoid contact with

acids citrus juices.

3. Always use the scale on a hard, flat surface. DO NOT use on carpet.

1.Clean the product with a soft, slightly damp (not wet) cloth. Remove

container to clean up. Ensure container is empty before removing; Do

not put scale into water. The scale is not water-proof.

4 DO NOT strike, shake or drop the scale.

5 The scale is precise instrument. Please treat with care.

6 Put the scale in cool and dry place.

7 If fail to switch on the scale, check whether battery is installed, or

battery power is low.

8 For family use only. DO NOT use for commercial purpose.

√

FRIENDLY REMINDER

When pouring liquid from the measuring cup, please remove the measuring

cup from scale body. If scale body has to be held when pouring the liquid,

please press the edge of the measuring cup with your thumb to avoid the

prolapse. Please see the diagram.

Page 1
13ek-019e r2 cleaning and care 7 measuring cup scales instructions for use ek-19a series iso 9001:2008 certified by sgs 2. All plastic parts should be cleaned immediately after contact with fats, spices, vinegar and strongly flavored/colored foods. Avoid contact with acids citrus juices. 3. Always u...
Page 2
1.Measuring cup function 2.Indicate volume of water,milk,oil and flour 3.Two weight units convertible: g, lb:oz 4.Three volume units convertible: ml, fl'oz, cup 5.Tare,zero function 6.Low battery power/overload indication 7.Auto off features to install or replace battery open the battery compartment...
Page 3
4 3 on/off zero to measure on/off zero 1. Weighing mode a. Place the scale on a solid and flat surface. . B. Press to turn on. C. Wait until lcd shows "0". D. Load weighing object on scale to start weighing, lcd wil l show the weight reading. Unit conversion if the scale is with both measuring syste...
Page 4
"zero" or "tare" function to weigh different loads consecutively without removing loads from the scale. Put first load on the scale, get weight reading. Press button to reset the lcd reading to "0" before adding next load. You can repeat this operation. 5 1. 2. Warning indicators 1. Replace new batt...