Chauvet CH-110A Assembly And Operation
CHAUVET, 3000 N 29
th
Ct. Hollywood, FL 33020 U.S.A.
(800) 762-1084 – (954) 929-1115, Fax (954) 929-5560
www.chauvetlighting.com
DJtube™ 2.0
CH-110A
Introduction
The DJtube™ 2.0 is a 39 inch LED lighting tube comprised of 30 each red, green and blue LEDs. The
DJtube™ 2.0 randomly produces a vast array of colors in continuous chase patterns and the speed of
chase can be adjusted on the individual tube. Its white diffused UV coated plastic housing allows for
pleasant and aesthetic installation in various locations. Up to 40 tubes can be daisy chained from one
power source. The DJtube™ 2.0 will enhance appearance on front boards, in club and stage installations.
Perimeter, cove, display and accent lighting are other considerations for general use.
What is included
1 x DJtube™ 2.0 CH-110A
1 x Power cord (AC 120V)
1 x Instructions & Warranty Card
Assembly & Operation
Specifications
Current draw ............................................................. (peak 20.4W @ 120V), (inrush 22.8W @ 120V)
Power (US) .................................................................................................................. 120V 60Hz
Power (Europe)............................................................................................................. 230V 50Hz
Max linkable quantity ....................................................................................................... 40 tubes
Weight................................................................................................................... 3 lbs (1.36Kgs)
Shipping weight ...................................................................................................... 4 lbs (1.81Kgs)
Individual size ................................................ 3.74 in (95mm) x 2.95 in (75mm) x 40.2 in (1021mm)
Master packed ........................................................................................... 10pcs / 39.7 lbs (18Kgs)
Master pack size ..........................................7.48 in (190mm) x 14.8 in (376mm) x 40.3 in (1024mm)
Warranty .................................................................................................. 1-Year Limited Warranty
1.
Connect the power cord to the
DJtube™ 2.0. The power input
connector is a two pin male
socket.
2.
Plug power cord to an AC
power outlet and you are
done.
The DJtube™ 2.0 will begin to
operate immediately after applying
power. The built-in chase programs
produce random colors. You may
connect additional tubes in series.
Power Cord
DJtube™
Up to 40 tubes can be powered from one power adapter. Simply connect each tube as shown below.
There are no user
serviceable parts in
this product.
Product intended
for Indoor Use Only!
Chase Speed Dipswitches
Fastest to . . . . . .
Slowest