Conair ExtremeSteam GS75C Instructions For Use Manual - Troubleshooting The Steamer

TROUBLESHOOTING THE STEAMER

•  PROBLEM - Steamer fails to heat  

CAUSE - Steamer not plugged in  

SOLUTION - Plug into electrical outlet

•  PROBLEM - No steam  

CAUSE - Water level is low (beep will sound)  

SOLUTION - Turn On/Off switch off  

and refill water tank

•  PROBLEM - Water drips from nozzle  

CAUSE - Condensation in hose  

SOLUTION - Hold the hose vertically 

and allow water to drain back into unit

•  PROBLEM - Nozzle gurgles  

CAUSE - Condensation in hose  

SOLUTION - Hold the hose vertically  

and allow water to drain back into unit

•  PROBLEM - Poor steam performance 

CAUSE - Sediment in tank  

SOLUTION - Decalcify reservoir and  

water tank. See decalification instructions.

• 

PROBLEM - Dye on T-nozzle 

CAUSE - Fabric not colorfast / Touching 

T-nozzle to fabric 

SOLUTION - Move T-nozzle 1/2 inch away 

from fabric during use. Clean T-nozzle  

with household cleaner and rinse with soap 

and water

• 

PROBLEM - Discoloring of fabric 

CAUSE - Dye on surface of fabric needs  

specialty treatment and cleaning / Fabric 

not suitable for steaming 

SOLUTION - Some custom specialty fabrics 

have dyes that are NOT COLORFAST and 

are not suitable for steaming. Test fabric 

for colorfastness in an inconspicuous spot 

before steaming.

NOTE: Amounts of chemicals in water will 

vary in different areas. To ensure contin-

ued operation of the steamer, never store 

without cleaning and removing excess 

water from the reservoir and water tank.