E-one REF600M User Manual

Summary of REF600M

  • Page 2

    M o n o p o w e r am p l i f i e r w i t h t a b l e o f c o n t e n t s information safety information ……………………………………………………………………………………2 certifications/standards ……………………………………………………………………………………3 warranty ……………………………………………………………………………………4 unpacking ……………………………………………………………………………………4 setup and placem...

  • Page 3

    The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product enclosure that may be of sufficient magnitude to constitute a risk of shock to persons. Explanation of symbols used in this man...

  • Page 4

    Fuse replacement: this appliance is fitted with a non-rewireable 10 amp mains plug. The plug contains a 10 amp fuse. If the fuse has blown it can be replaced as follows: a) pull out the black fuse cover/carrier. B) remove and dispose of the blown fuse. C) fit a new 10 amp bs1362 approved fuse into t...

  • Page 5

    Bel canto products are automatically covered by a 90 day factory warranty that covers all internal parts and labor. Register online ( http://www.Belcantodesign.Com/eone/support/warranty-registration-form/ ) within 30 days of purchase from an authorized dealer to automatically extend your warranty fo...

  • Page 6

    Onnections never connect the positive speaker output to any ground contact! Use class 2 wiring for all loudspeaker connections! Connecting the positive speaker output on the ref600 m to ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty. The ne...

  • Page 7

    The ref600 m and dc coupling the ref600 m is dc coupled with no coupling capacitors in the signal path. This optimizes audio signal quality, maximizing micro and macro-dynamic performance. While the amplifier will protect itself and your loudspeakers from excessive dc offset, it is critical to ensur...

  • Page 8

    Specifications power output 1% thd: 600w 4 ohms, 300w 8 ohms minimum load: 2 ohms peak output current: 27 amperes frequency response: +/-3 db 0hz-50khz, all loads thd+n: 0.003% 1w, 1khz, 4 ohms imd (ccif): 0.0003%, 1w, 14:15khz, 4 ohms output noise: 35uvrms a-weighted 10hz-20khz voltage gain: 27db (...

  • Page 9

    Application of council directive(s): 2004/108/ec and 2006/95/ec, as amended standard(s) to which conformity is declared: en 55013:2001 + a1:2003 + a2:2006 en 55020:2007 en 61000-3-2:2006 en 61000-3-3:1995 + a1:2001 + a2:2005 en 60065:2002/a12:2011 manufacturer: bel canto design, ltd. 221 1 st street...

  • Page 10

    Bel canto version 1.0