1. DL manuals
  2. Eamlab
  3. Amplifier
  4. Element 202i
  5. User Manual

Eamlab Element 202i User Manual

Summary of Element 202i

  • Page 1

    1 element202i thank’you of purchasing this eamlab product. Who are dedicated to the policy of creating the highest quality audio components, are proud to introduce. You can be assured that in preparing this component, every attention was paid in great detail by our entire staff to strict quality con...

  • Page 2: Features

    2 the element 202i is integrated power amplifier in ab class capable to 275wrms for channel into 8 ohm element 260ai is integrated amplifier in pure class a capable to 60 wrms for channel into 8 ohm circuit of preamplification consist to digital potentiometer pga2310 burr brown who is currently the ...

  • Page 3: Contents

    3 contents 2 …………….Introduction & features 3 …………….Table of contents 4 …………….Safety instructions 5 …………….Use remote control 6 …………….Menu and submenu on display 8 …………….Front pannel instruction 9 …………….Connections 10 …………….Troubleshooting guide 11 …………….Datasheet 12 …………….Guarantee policy.

  • Page 4: Safety Information

    4 1. For best performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install the unit in a cool, dry, clean place away from windows, heat sources, intense vibration, dust, humidity, cold, and sources of humming (transformers, motors, etc.).. To prevent fire ...

  • Page 5: Replacing Batteries

    5 unpacking: carefully remove from the box your amplifier and keep the original carton and packing materials for future trips, expeditions or long-term storage before the installation : remove your amplifier, taking care to keep it in the future if you ever require to be shipped to a service center ...

  • Page 6: Set –

    6 set – button for sub menu dipaly to command balance and mono/stereo operation pwr – turn on /off preamplifier dsp – same set button v+ increase volume v - decrease volume mute – muting signal out ch+ / ch- select input remote control function ch+/ch- for changing input source, v+/v- button for inc...

  • Page 7: Mute

    7 to master menu use dsp or set button for enter in this menu. When inside this menu choose button : mute for changing mono/stereo operating v+ / v- for changing balance left/right gain dsp or set for return to master menu.

  • Page 8: Front Pannel Functions

    8 front pannel functions left encoder rotate to increase or decrease volume , push to on/off amplifier left encoder rotate for selected source input status led to indicated protection and stand-by control display.

  • Page 9: Connection And Functions

    9 connection and functions right speaker 8/4 ohm left speaker 8/4 ohm source input xlr balanced and single- ended general power on/off switch power supply cord.

  • Page 10: Problem

    10 problem possible cause remedy no power on the plug on the power cord is not connected or is not fully inserted . The mains fuse is blown securely connect the plug or check the fuse on the rear panel next to the socket no sound connecting signal input or output cables incorrect check the rca or xl...

  • Page 11: 202I / 260Ai Datasheet

    11 202i / 260ai datasheet input 1 stereo xlr balanced 3 stereo rca single ended output 2 wbt binding post for channel xlr input impedance (xlr input) 47 kohm rca input impedance (input 2/3/4) 22 kohm output power 260ai 60 / 120 wrms 8/4 ohm in class a output power 202i 275 / 500 wrms 8/4 ohm in ab c...

  • Page 12: How To Expedite Service

    12 how to expedite service return authorization procedure if you believe there is a problem with your component, please contact your dealer, distributor, or the eamlab factory to discuss the problem before you return the component for repair. To expedite service, you may wish to complete and e-mail ...