User manual wrist blood pressure monitor ebp-017 version:1.0 please do read the user manual carefully and thoroughly so as to ensure the safe usage of this product. Please keep this manual in order to reference in future. Thank you very much for selecting wrist blood pressure monitor ebp-017. Wrist ...
1 catalogue introduction introduction ............................................................... 1 safety information lcd display signal monitor components before you start .......................................................... 5 installing and replacing the batteries setting date, time and...
3 2 introduction introduction lcd display signal systolic blood pressure high pressure result diastolic blood pressure low pressure result bpm pulse/minute; heartbeats/minute memory mmhg measurement unit the blood pressure (1mmhg=0.133kpa) kpa measurement unit of the blood pressure (1kpa=7.5mmhg) ye...
Cuff (type b applied part) battery compartment monitor components list 1.Wrist blood pressure monitor (ebp-017) 3.User manual 2. 2×aaa batteries component list 1.Pcba 2.Air pipe 3.Pump 4.Valve 5.Cuff 5 4 before you start installing and replacing the batteries caution 1. Open the battery door. 2. Ins...
Setting date, time and measurement unit please proceed to time setting before your initial use so as to ensure each piece of record are labled with a time stamp. (year range: 2010-2050) 1.When the monitor is off, press the set button to enter into the clock mode, then press and hold “set” button for...
Tie the cuff 1 .Remove all accessories (watch, bracelet, etc) from your left wrist. If your physician has diagnosed you with poor circulation in your left wrist, use your right wrist. 2.Roll or push up your sleeve to expose the skin. 3.Apply the cuff to your left wrist with your palm facing up. 4 . ...
Recall the records caution the most recent record (1) is shown first. Each new measurement is assigned to the first (1) record. All other records are pushed back one digit (e.G., 2 becomes 3, and so on), and the last record (60) is dropped from the list. The exact time and date of the measurement wi...
Tips for measurement delete the records when you did not obtain the accurate measurement, you can clear all the measuring results by following steps below. 1.Press and hold both the “mem” button for 3 seconds when the monitor is in the memory recall mode, the flash display “del all” will show. 2.Whe...
Maintenance what are systolic pressure and diastolic pressure? Press artery vein blood discharging systolic relax blood entering diastolic when ventricles contract and pump blood out of the heart, the blood pressure reaches its maximum value in the cycle, which is called systolic pressure. When the ...
17 16 troubleshooting about blood pressure 1. Individual blood pressure varies multiple times everyday, it is also affect- ed by the way you tie your cuff and mea- surement position, so please take the measurement under the same conditions. 2.If the person takes medicine, the pressure will vary more...
Power supply battery powered mode: 2×aaa batteries (3v) display mode measurement mode oscillographic testing mode measurement range accuracy normal working condition storage & transportation condition measurement perimeter of the wrist about 13.5cm-21.5cm（ ） weight external dimensions attachment 2×a...
20 table 1 guidance and manufacturer’s declaration – electromagnetic emissions- for all me equipment and me systems guidance and manufacturer’s declaration – electromagnetic emissions rf emissions cispr 11 group 1 class b not applicable not applicable compliance the device is intended for use in the...
22 150 khz to 80 mhz 80 mhz to 800 mhz 800 mhz to 2.5 ghz table 6 recommended separation distances between portable and mobile rf communications equipment and the me equipment or me system – for me equipment and me systems that are not life-supporting recommended separation distances between portabl...
