EAW FR152HR Technical Specifications
AC
O
US
TIC
AL
PER
FORMANCE PA
RTN
ER
SH
IP
FR152HR Technical Specifications
APPLICATIONS
The FR152HR provides high
level, high definition perfor-
mance in a compact, cost effec-
tive package. The FR152HR has
extended low frequency re-
sponse and excellent high fre-
quency pattern control. Its small
footprint offers outstanding
placement flexibility for use in a
wide variety of short to medium-
throw applications.
• Performing Arts Facilities
• Theaters
• Corporate A/V
• Touring Shows
• Churches
• Clubs
• Lecture Halls
• Professional Musicians
FR152H
TOP/BOTTOM
SIDE
FRONT
BACK
ALL DIMENSIONS ARE IN INCHES UNLESS OTHERWISE NOTED
13.25
14.50
14.75
6.38
24.63
19.75
19.75
ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a two-way design, incorporating a 15-
inch low frequency cone-type transducer in a vented direct radiating
enclosure and a compression driver mounted on a high frequency horn.
The high frequency horn shall maintain constant horizontal coverage
to above 25 kHz.
The system shall meet the following performance criteria: Frequency
Response: 55 Hz to 17 kHz
±
3 dB. Axial Sensitivity: 100 dB SPL 1W@1m
over the 100 to 14 kHz band. Power Handling: 350 Watts full range
AES Standard. Vertical Coverage Angle: 45 degrees between -6 dB points.
Horizontal Coverage Angle: 90 degrees between -6 dB points.
The system shall include an internal passive crossover network, provid-
ing full range operation via rear panel inputs. The network shall be of a
third order asymmetrical design with compensation for maximally flat
response throughout the crossover region. Input connectors shall in-
clude dual 1/4” phone jacks, banana test points and Neutrik NL4
Speakon connectors.
The cabinet shall be constructed with void-free birch plywood with a
minimum of 18 plys to the inch and coated with a catalyzed black
polyurethane finish. The system shall be provided with one recessed
handle on each side of the system and stacking corner protectors. All
drivers shall be protected by a vinyl coated perforated steel grill.
The loudspeaker system shall be the EAW FR152 HR.
OTHER RELEVANT DOCUMENTS
• Group B Hardware Technical Specifications*
• Group B Price Lists
• APP Testing Procedures*
• Weatherproofing Technical Specifications*
• Structural/Mechanical Technical Specifications*
*Soon to be released
SPECIFICATIONS
Frequency Response
±
3 dB
55 Hz to 17 kHz
-10 dB
45 Hz
Axial Sensitivity
SPL 1w @ 1m
100 dB
1/2 Space Efficiency
5.0 dB
Impedance
Nominal
8
Ω
Power Handling
AES
350 Watts
100 Hour Sine Wave
150 Watts
Maximum Output
Peak
125 dB SPL
Long Term
122 dB SPL
Nominal Coverage Angles (-6 dB)
Horizontal
90 degrees
Vertical
45 degrees
Additional Descriptive Data
LF Subsystem
1 x 15-in Vented
HF Subsystem
1x 1-in Throat Compression Driver,
Constant Directivity Horn
Crossover Mode
Passive, Equalized
Finish
Black Catalyzed Polyurethane
Connectors
Dual 1/4” Phone Jacks, Banana
Plugs, Neutrik NL4 Speakon
tm
Grill
Vinyl Coated Perforated Steel
Dimensions & Weights
Height
24.63 in (623 mm)
Width
19.63 in (496 mm)
Depth
14.75 in (293 mm)
Net Weight
68 lbs.
(30.6 kg)
Shipping Weight
71 lbs.
(32.27 kg)
EASTERN ACOUSTIC WORKS
One Main Street, Whitinsville, MA 01588 • (508) 234 - 6158 • FAX (508) 234 - 8251 • BBS (800) 889-2540
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# FR152/10/26/94 • Printed In USA