EAW KF760 Declaration Of Conformity
DECLARATION OF WORKING LOAD LIMIT (WLL)
PRODUCT
Product Model:
KF760 rigging: 255105, 255106, 255107, 255108
KF761 rigging: 255101, 255102, 255103, 255104
Description:
Rigging
Assembly
Dimensions (h x w x d): Vary by P/N
Material: Steel
Supplied Accessories: Connecting Pin (button head)
p/n 0020558-01
OR
Connecting Pin (replaced by above)
p/n 179084
Accessories
N/A
COUNTRY OF ORIGIN FOR THE PRODUCT AND COMPONENTS
United States of America
TECHNICAL SPECIFICATIONS
Similarly constructed rigging assemblies are used in many EAW products;
please contact the Applications Support Group to determine whether this
applies to your product. The minimum design factor and Working Load Limit
of a single rigging point are provided in the table below. This data is
applicable only when the rigging assembly and loudspeaker are used in the
manner described in the user’s manual.
WLL (for one rigging point)
816 kg / 1800 lb
Ultimate Strength Design Factor
> 8:1
Pin here
for MAX
WLL
WLL (for one rigging point)
816 kg / 1525 lb
Ultimate Strength Design Factor
10:1
The ultimate strength for the KF760 and KF761 integral rigging points was
determined utilizing calibrated and certified destructive pull tests.
A WLL of 1,800 lb (816 kg) with an Ultimate Strength Design Factor >10:1
can be achieved by pinning through the loudspeaker above in the normal
manner and pinning through the bottom portion of the hinge as shown to the
right.
September 2007
Eastern Acoustic Works
Tel: 800 992 5013
One Main Street
e-mail:
info@eaw.com
Whitinsville, Ma 01588
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.