EAW MS165 Specifications
The MS -165 represents an extension of EAW's engineering effort
to produce studio monitors with true flat response over the entire
listening area for quality assurance in audio production applications.
The use of a small, high output, specially dampened , cone driver for
the midband eliminates the problem of polar response in this critical
region. This results in considerably better response linearity off axis
than the popular two-way designs with large woofers.
The MS -165's wide bandwidth, high power handling and flat
response combine with its efficiency to result in powerful output
capabilities for larger mixdown and mastering applications. These
same features make the MS -165 ideal for high level playback
applications.
Specifi -cations:
Frequency Response
Axial+ 2 dB
45 to 18k Hz
Axial - 10 dB
30 to 24k Hz
Polar Response:
- 6 dB 15k Hz at 60'
Sensitivity:
97 dB SPL 1w at 1m
Power Handling
Long Term (100 hours)
Sine Wave:
200 w RMS
Continuous Program:
350 w
Short Term Peak
(> 10 ms):
500 w
Maximum Sound Pressure Level
Continuous:
120 dB SPL at 1m
Program:
123 dB SPL at 1m
Nominal Impedance: 8 ohms
Crossover Frequency
Frequency:
450, 5,000 Hz
Slope:
18 dB per octave
Bass Driver:
L15/542
Nominal Diameter:
380mm (15in)
Voice Coil Diameter:
75mm Pin)
Flux Density:
13,000 gauss
Mid Driver:
MF -170A
Nominal Diameter:
170mm (6.5in)
Voice Coil Diameter:
38mm (1.5in)
Flux Density:
14,600 gauss
HF Driver:
CD-2070/AL-80
`I~rpe:
Compression Driver/Lens
Voice Coil Diameter:
26mm (lin)
Flux Density:
14,500 gauss
Enclosure T~rpe:
Vented 170 liter box
Dimensions:
223/411 x 303/4" x 181/8"