EAW UB12Se Installation Instructions
Installation Instructions
UB12Se BRACKET
EAW DWG NO 480353 (0)
1. Inventory
Before beginning installation, inventory kit to items listed.
Item
EAW P/N Qty
Description
1
606001
1
Bracket, HD12WM
2
102017
2
Screw, 1/4-20 x 1 SHCS, Black
3
105061
2
Washer, Neoprene, 1/4 I.D. X 1 O.D.
4
105007
2
1/4 Washer, Flat, Black
5
105008
2
1/4 Washer, Lock, Black
WARNING: Installation should only be done by an experienced technician. Improper installation may cause
serious injury. The surface where the bracket/cabinet is to be fastened must have enough structural integrity
to support 150 pounds.
2. Mounting the Bracket
Due to various construction methods and materials used today, the hardware for securing the
bracket to the mounting surface is not supplied. It is recommended that you consult a building
professional for the proper mounting hardware before mounting the bracket.
3. Removing the Shipping Hardware
Remove the flat head screws from the
top and bottom of the cabinet using a
5/32 Allen wrench.
4. Choosing which Holes to Use
There are two holes in each
bracket arm. Use the inner holes.
5. Hanging the Cabinet
A. Place a neoprene gasket on the
bracket’s lower arm. Center it
on the appropriate hole.
B. Position the cabinet between
the bracket arms.
C. Align the bracket’s top inner
hole to the cabinet’s 1/4-20
threaded hole.
D. Holding the cabinet in position,
insert the screw with its
lock washer and flat washer
through the bracket’s hole and
into the cabinet’s top threaded
hole and hand tighten.
E. Repeat step D through the
bottom bracket hole.
F. Position cabinet and
tighten both screws with
a 3/16 Allen wrench.
EASTERN ACOUSTIC WORKS
1 Main Street • Whitinsville, MA 01588 • Phone (800) 992-5013 • FAX (508) 234-8251
2
4
4
3
3
MOUNTING BRACKET
HD12WM
EAW P/N 606001
UB12Se
(2) LOCK WASHER 1/4
EAW P/N 105008
(2) SCREW 1/4-20 X 1 LG
SHCS 18-8 BLK
EAW P/N 102017
(2) FLAT WASHER 1/4
EAW P/N 105007
7.94
11.04
3.00
(2) NEOPRENE WASHER
EAW P/N 105061
3X Ø.31 THRU
4.62
4.62