1. DL manuals
  2. Ecotck
  3. Heater
  4. Monica Plus Freestanding
  5. Installation Manual

Ecotck Monica Plus Freestanding Installation Manual

Summary of Monica Plus Freestanding

  • Page 1

    Ecoteck monica plus freestanding w ood pellet burning heater ecoteck monica plus freestanding wood pellet burning heater installation specifications safety testing of the ecoteck monica plus freestanding pellet burning heater to as/nzs 2918:2001 spectrum report 0186 emissions ars 10/2307 flue kit te...

  • Page 2: Installation

    2 installation dimensions – monica plus freestanding 771mm 30,33in 385mm 15,16in 190mm 7,48in 599mm 23,59in 43mm 1,69in 459mm 18,07in 1037mm 40,81in 1000mm 39,36in 456,5mm 17,97in 20mm 0,79in 508mm 20,01in refer to safety test 09/1910 for all clearances to combustible..

  • Page 3: Clearances to Combustibles

    3 installation clearances & specifications minimum clearances shown are in millimetres. All ecoteck fires are tested to as/nzs2918:2001. Specifications were correct at time of printing but may alter and those detailed below should be used as a guide only. Refer to the installation and operation manu...

  • Page 4: Location of The Pellet Fire

    4 location of the pellet fire installation of the ecoteck monica plus freestanding wood pellet burning heater should be undertaken by an experienced installer. Please read the monica plus owners/technical manual thoroughly before commencing installation as failure to follow the instruction could cau...

  • Page 5

    5 internal standard flue kit (50) internal standard flue kit each 50 internal standard flue kit contains:- y ti t n a u q n o i t p i r c s e d o n t r a p 1 galvanised outer liner ø100mm x 900mm long 1 4 3 2 1 1 1 1 1 1 2 2 stainless steel inner liner ø75mm x 900mm long 4a black p/coat outer liner ...

  • Page 6

    6 external standard flue kit (51) each 51 external standard flue kit contains:- y ti t n a u q n o i t p i r c s e d o n t r a p 1 galvanised outer liner ø100mm x 900mm long 2 stainless steel inner liner ø75mm x 900mm long 5 inner/outer flue liner spacer 6w wall thimble – 2 pieces ø102mm holes 6s so...

  • Page 7: Flashing Options

    7 flashing options decktite - for all steel roof profiles please circle the flashing option to be used. When considering an alternative method please consult your local council. Seismic restraint all installation scenarios for monica plus require the use of hold-down anchors (one on each side) fixin...