Edelbrock 1500-6500 Specifications
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift:
Intake 312°
Exhaust 322°
Duration at .050" Lift:
Intake 234°
Exhaust 244°
Lift at cam:
Intake .325"
Exhaust .340"
Lift at valve:
Intake .562"
Exhaust .588"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
44° ABDC
Exhaust
59° BBDC
5° ATDC
Centerlines:
Intake: 107°
Lobe Separation:
112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift:
Intake 312°
Exhaust 322°
Duration at .050" Lift:
Intake 234°
Exhaust 244°
Lift at cam:
Intake .325"
Exhaust .340"
Lift at valve:
Intake .562"
Exhaust .588"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
44° ABDC
Exhaust
59° BBDC
5° ATDC
Centerlines:
Intake: 107°
Lobe Separation:
112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift:
Intake 312°
Exhaust 322°
Duration at .050" Lift:
Intake 234°
Exhaust 244°
Lift at cam:
Intake .325"
Exhaust .340"
Lift at valve:
Intake .562"
Exhaust .588"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
44° ABDC
Exhaust
59° BBDC
5° ATDC
Centerlines:
Intake: 107°
Lobe Separation:
112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07
CAMSHAFT: Performer RPM Hydraulic
CATALOG #7168
ENGINE: Ford 351 c.i.d. Cleveland V8
RPM RANGE: 1500-6500
CAUTION: Do not use dual valve springs. Use appropriate valve
springs which will accomodate the lift of the camshaft. Use stock ratio
rocker arms only.
Duration at .004" Lift:
Intake 312°
Exhaust 322°
Duration at .050" Lift:
Intake 234°
Exhaust 244°
Lift at cam:
Intake .325"
Exhaust .340"
Lift at valve:
Intake .562"
Exhaust .588"
Timing at .050 Lift:
Open
Close
Intake
10° BTDC
44° ABDC
Exhaust
59° BBDC
5° ATDC
Centerlines:
Intake: 107°
Lobe Separation:
112°
CAUTION: Use Edelbrock Performer-Link Timing Chain and Gear Set
#7821 or Accu-Drive gear drive #7896. Do not use late model timing
chain and gear sets that are designed for emission-controlled engines.
These timing sets are machined in a retarded position and are not
recommended for this camshaft installation. Edelbrock Timing Sets
feature three keyways for specified timing selection. Use "0" position
for most applications.
©2007 Edelbrock Corporation
Brochure #63-7168C
Catalog #7168
Rev. 9/07