Edelbrock 15013 Installation Instructions
Catalog #15013
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0393
Fig. 1
Towards Exhaust
Elbow
Towards Turbine
Outlet
1.75”
• KIT CONTENTS:
Qty.
Description
❑
5
Stud, 8mm x 1.25 x 1.75” long
❑
5
Nut, 8mm x 1.25
❑
5
Washer, 8mm
• INSTALLATION:
1. Hand tighten the 1.75” long studs into the turbine outlet,
with the longer threads towards the turbine outlet
(See Fig. 1).
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
TURBOCHARGER TURBINE OUTLET STUD KIT
For Turbine Outlet to Outlet Elbow
Catalog #15013
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the outlet elbow to the turbine outlet. The hardware is constructed of high-
quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
E-Mail: Edelbrock@Edelbrock.com
Catalog #15013
Rev. 5/05 - RS/mc
©2005 Edelbrock Corporation
Brochure #63-0393
Fig. 1
Towards Exhaust
Elbow
Towards Turbine
Outlet
1.75”
• KIT CONTENTS:
Qty.
Description
❑
5
Stud, 8mm x 1.25 x 1.75” long
❑
5
Nut, 8mm x 1.25
❑
5
Washer, 8mm
• INSTALLATION:
1. Hand tighten the 1.75” long studs into the turbine outlet,
with the longer threads towards the turbine outlet
(See Fig. 1).
2. When attaching the turbocharger to the exhaust manifold,
and the turbo outlet elbow to the turbocharger, use an 8mm
washer under each nut, and hand tighten the 8mm x 1.25
nuts onto the studs.
3. Torque the 8mm x 1.25 nuts to 190 inch/lbs. (approximately
16 ft/lbs).
TURBOCHARGER TURBINE OUTLET STUD KIT
For Turbine Outlet to Outlet Elbow
Catalog #15013
INSTALLATION INSTRUCTIONS
Description: Contains the necessary hardware to mount the outlet elbow to the turbine outlet. The hardware is constructed of high-
quality stainless steel and can be used with any Garrett T25 or T28 Turbocharger.
Edelbrock Corporation
2700 California St. • Torrance • CA • 90503
Tech Line: 1-800-416-8628
E-Mail: Edelbrock@Edelbrock.com