Edelbrock 15041 Installation Instructions

INTAKE MANIFOLD GASKET

For Honda B16 and B18C1 Engines

Catalog #15041 & #15042

INSTALLATION INSTRUCTIONS

Edelbrock Corporation • 2700 California St. • Torrance, CA  90503

Tech Line:  1-800-416-8628 • E-Mail:  Edelbrock@Edelbrock.com

1. Clean all gasket mating surfaces.  Stuff paper towels into the open intake ports before cleaning to prevent any debris

from entering the engine.

2. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below 

(See Fig. 1).

Torque all bolts to 17 ft./lbs

Fig. 1

Catalog #15041 & #15042

Rev. 4/05 - RS/mc

©2005 Edelbrock Corporation

Brochure #63-0382

INTAKE MANIFOLD GASKET

For Honda B16 and B18C1 Engines

Catalog #15041 & #15042

INSTALLATION INSTRUCTIONS

Edelbrock Corporation • 2700 California St. • Torrance, CA  90503

Tech Line:  1-800-416-8628 • E-Mail:  Edelbrock@Edelbrock.com

1. Clean all gasket mating surfaces.  Stuff paper towels into the open intake ports before cleaning to prevent any debris

from entering the engine.

2. Torque all intake manifold bolts to 17 ft/lbs., following the sequence below 

(See Fig. 1).

Torque all bolts to 17 ft./lbs

Fig. 1

Catalog #15041 & #15042

Rev. 4/05 - RS/mc

©2005 Edelbrock Corporation

Brochure #63-0382